74ALVC38M

Revised March 2005 74ALVC38 Low Voltage Quad 2-Input NAND Gate with Open Drain Outputs and 3.6V Tolerant Inputs and Outputs General Description Features The ALVC38 contains four 2-input NAND gates with open drain outputs. This product is designed for low voltage (1.4V to 3.6V) VCC applications with I/O compatibility up to 3.6V. The ALVC38 is fabricated with advanced CMOS technology to achieve high-speed operation while maintaining CMOS low power dissipation. ■ 1.4V to 3.6V VCC supply operation ■ 3.6V tolerant inputs and outputs ■ tPD 3.3 ns max for 3.0V to 3.6V VCC 4.2 ns max for 2.3V to 2.7V VCC 6.7 ns max for 1.65V to 1.95V VCC ■ Power-off high impedance inputs and outputs ■ Uses patented Quiet Series¥ noise/EMI reduction circuitry ■ Latchup conforms to JEDEC JED78 ■ ESD performance: Human body model ! 2000V Machine model ! 250V Ordering Code: Order Number Package Number 74ALVC38M 74ALVC38MTC M14A MTC14 Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names Description An , Bn Inputs On Outputs Quiet Series¥ is a trademark of Fairchild Semiconductor Corporation. © 2005 Fairchild Semiconductor Corporation DS500719 www.fairchildsemi.com 74ALVC38 Low Voltage Quad 2-Input NAND Gate with Open Drain Outputs and 3.6V Tolerant Inputs and Outputs December 2001 74ALVC38 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Voltage (VI) Output Voltage (VO) (Note 2) Recommended Operating Conditions (Note 3) 0.5V to 4.6V 0.5V to 4.6V 0.5V to VCC 0.5V Power Supply Operating DC Input Diode Current (IIK) VI  0V 0V to VCC 50 mA Output Voltage (VO) 0V to VCC 50 mA Minimum Input Edge Rate ('t/'V) DC Output Diode Current (IOK) Free Air Operating Temperature (TA) VO  0V DC Output Source/Sink Current VIN r50 mA (IOH/IOL) Supply Pin (I CC or GND) 0.8V to 2.0V, VCC 40qC to 85qC 3.0V 10 ns/V Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. DC VCC or GND Current per Storage Temperature Range (TSTG) 1.65V to 3.6V Input Voltage (VI) r100 mA 65qC to 150qC Note 2: IO Absolute Maximum Rating must be observed. Note 3: Floating or unused inputs must be held HIGH or LOW. DC Electrical Characteristics Symbol VIH VIL VOL Parameter VCC Conditions (V) HIGH Level Input Voltage LOW Level Input Voltage LOW Level Output Voltage IOL 100 PA IOL 4 mA IOL IOL IOL Min 1.65 -1.95 0.65 x VCC 2.3 - 2.7 1.7 2.7 - 3.6 2.0 Max V 1.65 -1.95 0.35 x VCC 2.3 - 2.7 0.7 2.7 - 3.6 0.8 1.65 - 3.6 0.2 1.65 0.45 6 mA 2.3 0.4 12mA 2.3 0.7 2.7 0.4 V V 3 0.55 II Input Leakage Current 0 d VI d 3.6V 3.6 r5.0 PA IOZ 3-STATE Output Leakage 0 d VO d 3.6V 3.6 r10 PA ICC Quiescent Supply Current VI 3.6 40 PA 'ICC Increase in ICC per Input VIH 3 -3.6 750 PA www.fairchildsemi.com 24 mA Units VCC or GND, IO VCC  0.6V 2 0 TA Symbol CL Parameter V CC tPHL, tPLH Propagation Delay Bus to Bus 40qC to 85qC, RL 500: 50 pF 3.3V r 0.3V V CC 2.7V V CC CL 30 pF 2.5V r 0.2V V CC 1.8V r 0.15V Min Max Min Max Min Max Min Max 1.1 3.3 1.3 4.2 0.8 3.7 1.0 6.7 Units ns Capacitance Symbol Parameter 25qC TA Conditions VCC Typical Units CIN Input Capacitance VI 0V or VCC 3.3 6 pF COUT Output Capacitance VI 0V or VCC 3.3 7 pF CPD Power Dissipation Capacitance 3.3 20 2.5 20 Outputs Enabled f 10 MHz, CL 50 pF pF AC Loading and Waveforms (VCC 3.3V r 0.3V to 1.8V r 0.15V) TABLE 1. Values for Figure 1 TEST SWITCH tPZL, tPLZ VL FIGURE 1. AC Test Circuit TABLE 2. Symbol VCC 3.3V r 0.3V 2.7V 2.5V r 0.2V 1.8V r 0.15V Vmi 1.5V 1.5V VCC /2 VCC/2 Vmo 1.5V 1.5V VCC /2 VCC/2 Vx VOL  0.3V VOL  0.3V VOL  0.15V VOL  0.15V VL 6V 6V VCC*2 VCC*2 FIGURE 2. Waveform for Open Drain, Inverting and Non-inverting Functions 3 www.fairchildsemi.com 74ALVC38 AC Electrical Characteristics 74ALVC38 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A www.fairchildsemi.com 4 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 5 www.fairchildsemi.com 74ALVC38 Low Voltage Quad 2-Input NAND Gate with Open Drain Outputs and 3.6V Tolerant Inputs and Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued)