74LVX3245MTCX

Revised September 2003 74LVX3245 8-Bit Dual Supply Translating Transceiver with 3-STATE Outputs General Description Features The LVX3245 is a dual-supply, 8-bit translating transceiver that is designed to interface between a 3V bus and a 5V bus in a mixed 3V/5V supply environment. The Transmit/ Receive (T/R) input determines the direction of data flow. Transmit (active-HIGH) enables data from A Ports to B Ports; Receive (active-LOW) enables data from B Ports to A Ports. The Output Enable input, when HIGH, disables both A and B Ports by placing them in a high impedance condition. The A Port interfaces with the 3V bus; the B Port interfaces with the 5V bus. ■ Bidirectional interface between 3V and 5V buses ■ Inputs compatible with TTL level ■ 3V data flow at A Port and 5V data flow at B Port ■ Outputs source/sink 24 mA ■ Guaranteed simultaneous switching noise level and dynamic threshold performance ■ Implements proprietary EMI reduction circuitry ■ Functionally compatible with the 74 series 245 The LVX3245 is suitable for mixed voltage applications such as notebook computers using 3.3V CPU and 5V peripheral components. Ordering Code: Order Number Package Number Package Description 74LVX3245WM M24B 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 74LVX3245QSC MQA24 24-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide 74LVX3245MTC MTC24 24-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Logic Symbol Connection Diagram Pin Descriptions Pin Names Description OE Output Enable Input T/R Transmit/Receive Input A0–A7 Side A Inputs or 3-STATE Outputs B0–B7 Side B Inputs or 3-STATE Outputs © 2003 Fairchild Semiconductor Corporation DS011620 www.fairchildsemi.com 74LVX3245 8-Bit Dual Supply Translating Transceiver with 3-STATE Outputs July 1993 74LVX3245 Truth Table Inputs OE Outputs T/R L L Bus B Data to Bus A L H Bus A Data to Bus B H X HIGH-Z State H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Logic Diagram www.fairchildsemi.com 2 Recommended Operating Conditions (Note 2) −0.5V to +7.0V Supply Voltage (VCCA, VCCB) DC Input Voltage (VI) @ OE, T/R −0.5V to VCCA + 0.5V Supply Voltage DC Input/Output Voltage (VI/O) @ An −0.5V to VCCA + 0.5V @ Bn −0.5V to VCCB + 0.5V VCCA 2.7V to 3.6V VCCB 4.5V to 5.5V Input Voltage (VI) @ OE, T/R DC Input Diode Current (IIN) 0V to VCCA Input/Output Voltage (VI/O) @ OE, T/R DC Output Diode Current (IOK) ±20 mA @ An ±50 mA @ Bn DC Output Source or 0V to VCCA 0V to VCCB −40°C to +85°C Free Air Operating Temperature (TA) ±50 mA Sink Current (IO) Minimum Input Edge Rate (∆t/∆V) DC VCC or Ground Current 8 ns/V VIN from 30% to 70% of VCC ±50 mA per Output Pin (ICC or IGND) VCC @ 3.0V, 4.5V, 5.5V ±100 mA and Max Current @ ICCA ±200 mA @ ICCB Storage Temperature Range (TSTG) Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. −65°C to +150 °C DC Latch-Up Source or ±300 mA Sink Current Note 2: Unused Pins (inputs and I/Os) must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIHA Parameter TA = −40°C to +85°C 3.6 5.0 2.0 2.0 2.7 5.0 2.0 2.0 Bn 3.3 4.5 2.0 2.0 3.3 5.5 2.0 2.0 Maximum LOW Level An, T/R, 3.6 5.0 0.8 0.8 Input Voltage OE 2.7 5.0 0.8 0.8 Bn 3.3 4.5 0.8 0.8 3.3 5.5 0.8 0.8 Minimum HIGH Level 3.0 4.5 2.99 2.9 2.9 Output Voltage 3.0 4.5 2.65 2.35 2.25 2.7 4.5 2.5 2.3 2.2 2.7 4.5 2.3 2.1 2.0 3.0 4.5 4.5 4.4 4.4 3.0 4.5 4.25 3.86 3.76 3.0 4.5 0.002 0.1 0.1 Maximum LOW Level VOLB Units Conditions Guaranteed Limits An, T/R, Output Voltage IIN TA = +25°C Typ OE VOHB VOLA (V) Input Voltage VILB VOHA VCCB (V) Minimum HIGH Level VIHB VILA VCCA V V VOUT ≤ 0.1V or ≥ VCC − 0.1V VOUT ≤ 0.1V or ≥ VCC −0.1V IOUT = −100 µA V IOH = −24 mA IOH = −12 mA IOH = −24 mA V IOUT = −100 µA IOH = −24 mA IOUT =100 µA 3.0 4.5 0.21 0.36 0.44 2.7 4.5 0.11 0.36 0.44 2.7 4.5 0.22 0.42 0.5 3.0 4.5 0.002 0.1 0.1 3.0 4.5 0.18 0.36 0.44 3.6 5.5 ±0.1 ±1.0 µA 3.6 5.5 ±0.5 ±5.0 µA V IOL = 24 mA IOL = 12 mA IOL = 24 mA V IOUT = 100 µA IOL = 24 mA Maximum Input Leakage Current VI = VCCB, GND @ OE, T/R IOZA VI = VIL, VIH Maximum 3-STATE Output Leakage VO = VCCA, GND @ An IOZB VI = VIL, VIH Maximum 3-STATE Output Leakage OE = VCCA 3.6 ±0.5 5.5 ±5.0 µA OE = VCCA VO = VCCB, GND @ Bn 3 www.fairchildsemi.com 74LVX3245 Absolute Maximum Ratings(Note 1) 74LVX3245 DC Electrical Characteristics Symbol ∆ICC Parameter Maximum Bn ICCT/Input @ An, T/R, OE ICCA (Continued) TA = +25°C VCCA VCCB (V) (V) Typ 3.6 5.5 1.0 TA = −40°C to +85°C Units 1.35 1.5 mA 3.6 5.5 0.35 0.5 mA 3.6 5.5 5 50 µA VI = VCCB − 2.1V VI = VCCA −0.6V An = VCCA or GND Quiescent VCCA Supply Current Conditions Guaranteed Limits Bn = VCCB or GND, OE = GND, T/R = GND ICCB An = VCCA or GND Quiescent VCCB Supply Current 3.6 5.5 8 VOLPA Quiet Output Maximum 3.3 5.0 0.8 VOLPB Dynamic VOL 3.3 5.0 1.5 80 µA Bn = VCCB or GND, OE = GND, T/R = VCCA VOLVA Quiet Output Minimum 3.3 5.0 −0.8 VOLVB Dynamic VOL 3.3 5.0 −1.2 VIHDA Minimum HIGH Level 3.3 5.0 2.0 VIHDB Dynamic Input Voltage 3.3 5.0 2.0 VILDA Maximum LOW Level 3.3 5.0 0.8 VILDB Dynamic Input Voltage 3.3 5.0 0.8 V V V V (Note 3) (Note 4) (Note 3) (Note 4) (Note 3) (Note 5) (Note 3) (Note 5) Note 3: Worst case package. Note 4: Max number of outputs defined as (n). Data inputs are driven 0V to VCC level; one output at GND. Note 5: Max number of Data Inputs (n) switching. (n−1) inputs switching 0V to VCC level. Input-under-test switching: VCC level to threshold (VIHD), 0V to threshold (VILD), f = 1 MHz. AC Electrical Characteristics Symbol Parameters TA = +25°C TA = −40°C to +85°C CL = 50 pF CL = 50 pF TA = −40°C to +85°C CL = 50 pF VCCA = 3.3V (Note 6) VCCA = 3.3V (Note 6) VCCA = 2.7V VCCB = 5.0V (Note 7) VCCB = 5.0V (Note 7) VCCB = 5.0V (Note 7) Min Typ Max Min Max Min Max tPHL Propagation Delay 1.0 5.4 8.0 1.0 8.5 1.0 9.0 tPLH A to B 1.0 5.6 7.5 1.0 8.0 1.0 8.5 tPHL Propagation Delay 1.0 5.1 7.5 1.0 8.0 1.0 8.5 tPLH B to A 1.0 5.7 7.5 1.0 8.0 1.0 8.5 tPZL Output Enable 1.0 4.8 8.0 1.0 8.5 1.0 9.0 tPZH Time OE to B 1.0 6.3 8.5 1.0 9.0 1.0 9.5 tPZL Output Enable 1.0 6.3 8.5 1.0 9.0 1.0 9.5 tPZH Time OE to A 1.0 6.8 9.0 1.0 9.5 1.0 10.0 tPHZ Output Disable 1.0 5.3 7.5 1.0 8.0 1.0 8.5 tPLZ Time OE to B 1.0 4.2 7.0 1.0 7.5 1.0 8.0 tPHZ Output Disable 1.0 5.3 8.0 1.0 8.5 1.0 9.0 1.0 3.7 6.5 1.0 7.0 1.0 7.5 1.0 1.5 tPLZ Time OE to A tOSHL Output to Output tOSLH Skew (Note 8) 1.5 1.5 Units ns ns ns ns ns ns ns Data to Output Note 6: Voltage Range 3.3V is 3.3V ± 0.3V. Note 7: Voltage Range 5.0V is 5.0V ± 0.5V. Note 8: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Parameter guaranteed by design. www.fairchildsemi.com 4 74LVX3245 Capacitance Symbol CIN CI/O Parameter Input Capacitance Input/Output Capacitance CPD Typ Units 4.5 pF 15 pF Power Dissipation A→B 55 Capacitance (Note 9) B→A 40 pF Conditions VCC = Open VCCA = 3.3V VCCB = 5.0V VCCB = 5.0V VCCA = 3.3V Note 9: CPD is measured at 10 MHz 8-Bit Dual Supply Translating Transceiver The LVX3245 is a dual supply device capable of bidirectional signal translation. This level shifting ability provides an efficient interface between low voltage CPU local bus with memory and a standard bus defined by 5V I/O levels. The device control inputs can be controlled by either the low voltage CPU and core logic or a bus arbitrator with 5V I/O levels. Manufactured on a sub-micron CMOS process, the LVX3245 is ideal for mixed voltage applications such as notebook computers using 3.3V CPU’s and 5V peripheral devices. Power Up Considerations To insure that the system does not experience unnecessary ICC current draw, bus contention, or oscillations during power up, the following guidelines should be adhered to (refer to Table 1): figured as inputs. With VCCA receiving power first, the A I/O Port should be configured as inputs to help guard against bus contention and oscillations. • A side data inputs should be driven to a valid logic level. This will prevent excessive current draw. • Power up the control side of the device first. This is the VCCA. The above steps will ensure that no bus contention or oscillations, and therefore no excessive current draw occurs during the power up cycling of these devices. These steps will help prevent possible damage to the translator devices and potential damage to other system components. • OE should ramp with or ahead of VCCA. This will help guard against bus contention. • The Transmit/Receive control pin (T/R) should ramp with VCCA, this will ensure that the A Port data pins are con- TABLE 1. Low Voltage Translator Power Up Sequencing Table Device Type 74LVX3245 VCCA VCCB T/R OE A Side I/O 3V 5V ramp ramp logic (power up 1st) configurable with VCCA with VCCA 0V or VCCA B Side I/O Floatable Pin Allowed outputs No Please reference Application Note AN-5001 for more detailed information on using Fairchild’s LVX Low Voltage Dual Supply CMOS Translating Transceivers. 5 www.fairchildsemi.com 74LVX3245 Physical Dimensions inches (millimeters) unless otherwise noted 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M24B 24-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide Package Number MQA24 www.fairchildsemi.com 6 24-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC24 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com 74LVX3245 8-Bit Dual Supply Translating Transceiver with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued)