MPSA42RL1G

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. MPSA42, MPSA43 High Voltage Transistors NPN Silicon Features http://onsemi.com • These are Pb−Free Devices* COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Collector −Emitter Voltage MPSA43 MPSA42 Collector −Base Voltage MPSA43 MPSA42 Emitter −Base Voltage VCEO VCBO Value Vdc 200 300 1 EMITTER Vdc 200 300 VEBO 6.0 Vdc Collector Current − Continuous IC 500 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 mW mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.5 12 W mW/°C −55 to +150 °C Operating and Storage Junction Temperature Range TJ, Tstg THERMAL CHARACTERISTICS Characteristic 2 BASE Unit Symbol Max Unit Thermal Resistance, Junction−to−Ambient RqJA 200 °C/W Thermal Resistance, Junction−to−Case RqJC 83.3 °C/W Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 12 1 3 STRAIGHT LEAD 2 3 BENT LEAD TO−92 (TO−226AA) CASE 29−11 MARKING DIAGRAM MPS A4x AYWWG G x = 2 or 3 A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2013 February, 2013 − Rev. 8 1 Publication Order Number: MPSA42/D MPSA42, MPSA43 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Characteristic Min Max Unit 300 200 − − 300 200 − − 6.0 − − − 0.1 0.1 − − 0.1 0.1 25 40 40 − − − − − 0.5 0.4 VBE(sat) − 0.9 Vdc fT 50 − MHz − − 3.0 4.0 OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (Note 1) (IC = 1.0 mAdc, IB = 0) MPSA42 MPSA43 Collector −Base Breakdown Voltage (IC = 100 mAdc, IE = 0) MPSA42 MPSA43 Emitter −Base Breakdown Voltage (IE = 100 mAdc, IC = 0) V(BR)CEO V(BR)CBO V(BR)EBO Collector Cutoff Current (VCB = 200 Vdc, IE = 0) (VCB = 160 Vdc, IE = 0) MPSA42 MPSA43 Emitter Cutoff Current (VEB = 6.0 Vdc, IC = 0) (VEB = 4.0 Vdc, IC = 0) MPSA42 MPSA43 ICBO IEBO Vdc Vdc Vdc mAdc mAdc ON CHARACTERISTICS (Note 1) hFE DC Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc) (IC = 30 mAdc, VCE = 10 Vdc) Collector −Emitter Saturation Voltage (IC = 20 mAdc, IB = 2.0 mAdc) MPSA42 MPSA43 Base−Emitter Saturation Voltage (IC = 20 mAdc, IB = 2.0 mAdc) VCE(sat) − Vdc SMALL−SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (IC = 10 mAdc, VCE = 20 Vdc, f = 100 MHz) Collector−Base Capacitance (VCB = 20 Vdc, IE = 0, f = 1.0 MHz) MPSA42 MPSA43 1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%. http://onsemi.com 2 Ccb pF MPSA42, MPSA43 ORDERING INFORMATION Package Shipping† MPSA42G TO−92 (Pb−Free) 5000 Units / Box MPSA42RL1G TO−92 (Pb−Free) 2000 / Tape & Reel MPSA42RLRAG TO−92 (Pb−Free) 2000 / Tape & Reel MPSA42RLRMG TO−92 (Pb−Free) 2000 / Ammo Pack MPSA42RLRPG TO−92 (Pb−Free) 2000 / Ammo Pack MPSA42ZL1G TO−92 (Pb−Free) 2000 / Ammo Pack Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 3 MPSA42, MPSA43 120 hFE , DC CURRENT GAIN VCE = 10 Vdc TJ = +125°C 100 80 25°C 60 40 -55°C 20 0 0.1 1.0 10 100 IC, COLLECTOR CURRENT (mA) Figure 1. DC Current Gain 100 C, CAPACITANCE (pF) Ceb @ 1MHz 10 1.0 0.1 0.1 Ccb @ 1MHz 1.0 10 100 VR, REVERSE VOLTAGE (VOLTS) 1000 Figure 2. Capacitance 1.4 V, VOLTAGE (VOLTS) 1.2 VCE(sat) @ 25°C, IC/IB = 10 VCE(sat) @ 125°C, IC/IB = 10 VCE(sat) @ -55°C, IC/IB = 10 VBE(sat) @ 25°C, IC/IB = 10 1.0 0.8 VBE(sat) @ 125°C, IC/IB = 10 0.6 VBE(sat) @ -55°C, IC/IB = 10 VBE(on) @ 25°C, VCE = 10 V VBE(on) @ 125°C, VCE = 10 V VBE(on) @ -55°C, VCE = 10 V 0.4 0.2 0.0 0.1 1.0 10 IC, COLLECTOR CURRENT (mA) 100 Figure 3. “ON” Voltages http://onsemi.com 4 MPSA42, MPSA43 1 VCE = 2 V TA = 25°C IC, COLLECTOR CURRENT (A) fT, CURRENT−GAIN−BANDWIDTH PRODCUT (MHz) 100 10 1 0.1 1 10 10 ms 0.01 100 1.0 s 0.1 1 10 100 IC, COLLECTOR CURRENT (mA) VCE, COLLECTOR EMITTER VOLTAGE (V) Figure 4. Current−Gain−Bandwidth Product Figure 5. Safe Operating Area http://onsemi.com 5 1000 MPSA42, MPSA43 PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AN A B STRAIGHT LEAD R P L SEATING PLANE K D X X G J H V C SECTION X−X N 1 N BENT LEAD B P T SEATING PLANE G K D X X J V 1 DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --- MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 --- STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR A R NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. C N SECTION X−X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G J K N P R V MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 --2.04 2.66 1.50 4.00 2.93 --3.43 --- ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MPSA42/D