MPSA63RLRAG

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. MPSA63, MPSA64 MPSA64 is a Preferred Device Darlington Transistors PNP Silicon Features http://onsemi.com • These are Pb--Free Devices* COLLECTOR 3 BASE 2 MAXIMUM RATINGS Rating Symbol Value Unit Collector--Emitter Voltage VCES --30 Vdc Collector--Base Voltage VCBO --30 Vdc Emitter--Base Voltage VEBO --10 Vdc Collector Current -- Continuous IC --500 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 mW mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.5 12 W mW/°C --55 to +150 °C Operating and Storage Junction Temperature Range TJ, Tstg EMITTER 1 TO--92 CASE 29 STYLE 1 1 12 3 STRAIGHT LEAD BULK PACK THERMAL CHARACTERISTICS Rating Symbol Max Unit Thermal Resistance, Junction--to--Ambient RθJA 200 °C/W Thermal Resistance, Junction--to--Case RθJC 83.3 °C/W 2 3 BENT LEAD TAPE & REEL AMMO PACK MARKING DIAGRAM Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. MPS A6x AYWW G G xx = 3, or 4 A = Assembly Location Y = Year WW = Work Week G = Pb--Free Package (Note: Microdot may be in either location) ORDERING INFORMATION *For additional information on our Pb--Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2007 April, 2007 -- Rev. 0 1 See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MPSA63/D MPSA63, MPSA64 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max --30 -- -- --100 -- --100 5,000 10,000 --- 10,000 20,000 --- -- --1.5 -- --2.0 125 -- Unit OFF CHARACTERISTICS Collector--Emitter Breakdown Voltage (IC = --100 mAdc, VBE = 0) V(BR)CES Collector Cutoff Current (VCB = --30 Vdc, IE = 0) ICBO Emitter Cutoff Current (VEB = --10 Vdc, IC = 0) IEBO Vdc nAdc nAdc ON CHARACTERISTICS (Note 1) DC Current Gain (IC = --10 mAdc, VCE = --5.0 Vdc) MPSA63 MPSA64 (IC = --100 mAdc, VCE = --5.0 Vdc) hFE MPSA63 MPSA64 Collector--Emitter Saturation Voltage (IC = --100 mAdc, IB = --0.1 mAdc) VCE(sat) Base--Emitter On Voltage (IC = --100 mAdc, VCE = --5.0 Vdc) VBE(on) -- Vdc Vdc SMALL--SIGNAL CHARACTERISTICS fT Current--Gain — Bandwidth Product (Note 2) (IC = --100 mAdc, VCE = --5.0 Vdc, f = 100 MHz) MHz 1. Pulse Test: Pulse Width ≤ 300 ms; Duty Cycle ≤ 2.0%. 2. fT = |hfe| S ftest. ORDERING INFORMATION Package Shipping† MPSA63G TO--92 (Pb--Free) 5000 Units / Bulk MPSA63RLRAG TO--92 (Pb--Free) 2000 / Tape & Reel MPSA64G TO--92 (Pb--Free) 5000 Units / Bulk MPSA64RLRAG TO--92 (Pb--Free) 2000 / Tape & Reel MPSA64RLRMG TO--92 (Pb--Free) 2000 / Ammo Pack Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 MPSA63, MPSA64 hFE , DC CURRENT GAIN (X1.0 K) 200 TA = 125°C 100 70 50 30 --10 V 25°C VCE = --2.0 V --5.0 V 20 10 7.0 5.0 --55°C 3.0 2.0 --0.3 --0.5 --0.7 --1.0 --2.0 --3.0 --5.0 --7.0 --10 --20 --30 --70 --50 --200 --100 --300 IC, COLLECTOR CURRENT (mA) Figure 1. DC Current Gain VCE , COLLECTOR--EMITTER VOLTAGE (VOLTS) --2.0 TA = 25°C VBE(sat) @ IC/IB = 100 V, VOLTAGE (VOLTS) --1.6 --1.2 VBE(on) @ VCE = --5.0 V --0.8 VCE(sat) @ IC/IB = 1000 IC/IB = 100 --0.4 0 --0.3 --0.5 --1.0 --2 --3 --5 --10 --20 --30 --50 IC, COLLECTOR CURRENT (mA) --100 --200 --300 --2.0 TA = 25°C --1.8 --1.6 --1.4 IC = --10 mA --50 mA --100 mA --175 mA --1.2 --1.0 --0.8 --0.6 --0.1 --0.2 --0.5 --1 --2 Figure 2. “On” Voltage --1000 VCE = --5.0 V f = 100 MHz TA = 25°C IC, COLLECTOR CURRENT (mA) |h FE |, HIGH FREQUENCY CURRENT GAIN --5 --10 --20 --50 --100--200 --500 --1K--2K --5K--10K IB, BASE CURRENT (mA) Figure 3. Collector Saturation Region 10 4.0 3.0 2.0 --300 mA 1.0 0.4 0.2 0.1 --1.0 --2.0 --5.0 --10 --20 --50 --100 --200 --500 --300 --200 TA = 25°C 1.0 s TC = 25°C --100 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT (DUTY CYCLE ≤ 10%) MPSA62 --50 --20 MPSA63 --10 --1.0 --1K 100 ms 1.0 ms --2.0 --4.0 --6.0 --10 --20 --40 --60 IC, COLLECTOR CURRENT (mA) VCE, COLLECTOR VOLTAGE (VOLTS) Figure 4. High Frequency Current Gain Figure 5. Active Region, Safe Operating Area http://onsemi.com 3 MPSA63, MPSA64 PACKAGE DIMENSIONS TO--92 (TO--226) CASE 29--11 ISSUE AM A B STRAIGHT LEAD BULK PACK R P L SEATING PLANE K D X X G J H V C 1 SECTION X--X N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 -----0.250 -----0.080 0.105 -----0.100 0.115 -----0.135 ------ MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 -----6.35 -----2.04 2.66 -----2.54 2.93 -----3.43 ------ N A R BENT LEAD TAPE & REEL AMMO PACK B P T SEATING PLANE G K D X X J V 1 C N SECTION X--X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G J K N P R V MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 -----2.04 2.66 1.50 4.00 2.93 -----3.43 -----STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303--675--2175 or 800--344--3860 Toll Free USA/Canada Fax: 303--675--2176 or 800--344--3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800--282--9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81--3--5773--3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MPSA63/D