RURG5060-F085

Ultrafast Rectifier 50 A, 600 V RURG5060-F085 Description The RURG5060−F085 is an ultrafast diode with soft recovery characteristics (trr< 90ns). It has low forward voltage drop and is silicon nitride passivated ionimplanted epitaxial planar construction. This device is intended for use as a freewheeling/clamping diode and rectifier in a variety of switching power supplies and other power switching applications. Its low stored charge and ultrafast recovery with soft recovery characteristic minimizes ringing and electrical noise in many power switching circuits, thus reducing power loss in the switching transistors. www.onsemi.com CATHODE Features • • • • • ANODE TO−247−2L 340CL High Speed Switching ( trr = 70 ns (Typ.) @ IF = 50 A ) Low Forward Voltage( VF = 1.6 V (Max.) @ IF = 50 A ) Avalanche Energy Rated This Device is Pb−Free AEC−Q101 Qualified MARKING DIAGRAM Applications • • • • $Y&Z&3&K RURG5060 Automotive DCDC Converter Automotive On Board Charger Switching Power Supply Power Switching Circuits ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Rating Symbol Value Unit Peak Repetitive Reverse Voltage VRRM 600 V Working Peak Reverse Voltage VRWM 600 V VR 600 V Average Rectified Forward Current @ TC = 25 °C IF(AV) 50 A Non−repetitive Peak Surge Current (Halfwave 1 Phase 50 Hz) IFSM 150 A EAVL 40 mJ TJ, TSTG −55 to +175 °C DC Blocking Voltage Avalanche Energy (1.4 A, 40 mH) Operating Junction and Storage Temperature Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. $Y &Z &3 &K RURG5060 1. Cathode = ON Semiconductor Logo = Assembly Plant Code = Numeric Date Code = Lot Code = Specific Device Code 2. Anode ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2013 March, 2020 − Rev. 4 1 Publication Order Number: RURG5060−F085/D RURG5060−F085 THERMAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Parameter Symbol Max Units RqJC Maximum Thermal Resistance, Junction to Case 0.4 °C/W RqJA Maximum Thermal Resistance, Junction to Ambient 45 °C/W PACKAGE MARKING AND ORDERING INFORMATION Device Marking Device Package Tube Quantity RURG5060 RURG5060−F085 TO−247 − 30 ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Symbol IR Parameter Instantaneous Reverse Current VFM (Note 1) Instantaneous Forward Voltage trr (Note 2) Reverse Recovery Time ta tb Qrr EAVL Test Conditions VR = 600 V IF = 50 A Min. Typ. Max. Unit TC = 25°C − − 250 uA TC = 175°C − − 2 mA TC = 25°C − 1.28 1.6 V TC = 175°C − 1.09 1.4 V IF = 1 A, di/dt = 100 A/ms, VCC = 390 V TC = 25°C − 42 65 ns IF = 50 A, di/dt = 100 A/ms, VCC = 390 V TC = 25°C − 70 90 ns TC = 175°C − 285 − ns TC = 25°C − Reverse Recovery Charge IF = 50 A, di/dt = 100 A/ms, VCC = 390 V 36 34 112 − − − ns ns nC Avalanche Energy IAV = 1.4 A, L = 40mH 40 − − mJ Reverse Recovery Time 1. Pulse : Test Pulse width = 300 ms, Duty Cycle = 2% 2. Guaranteed by design Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 RURG5060−F085 TEST CIRCUITS AND WAVEFORMS VGE AMPLITUDE AND RG CONTROL dlF/dt t1 AND t2 CONTROL IF L DUT RG CURRENT SENSE VGE dIF Trr dt ta 0 VDD − IGBT t1 IF + tb 0.25I RM IRM t2 Figure 1. Trr Test Circuit Figure 2. Trr Waveforms and Definitions I = 1.4 A L = 40 mH R < 0.1 W EAVL = 1/2LI2 [VR(AVL)/(VR(AVL)−VDD)] Q1 = IGBT (BVCES > DUT VR(AVL)) L VAVL R CURRENT SENSE + VDD DUT − IL IL I V Q1 VDD t0 Figure 3. Avalanche Energy Test Circuit t1 t2 t Figure 4. Avalanche Current and Voltage Waveforms www.onsemi.com 3 RURG5060−F085 IF, Forward Current (A) IR, Reverse Current (mA) TYPICAL PERFORMANCE CHARECTERISTICS VF, Forward Voltage (V) VR, Reverse Voltage (V) Figure 6. Typical Reverse Current vs. Reverse Voltage Cj, Capacitances (pF) Trr, Reverse Recovery Time (ns) Figure 5. Typical Forward Voltage Drop vs. Forward Current VR, Reverse Voltage (V) di/dt (A/ms) Figure 8. Typical Reverse Recovery Time vs. di/dt IF(AV), Average Forward Current (A) Irr, Reverse Recovery Current (A) Figure 7. Typical Junction Capacitance TC, Case Temperature (5C) di/dt (A/ms) Figure 9. Typical Reverse Recovery Current vs. di/dt Figure 10. Forward Current Derating Curve www.onsemi.com 4 RURG5060−F085 Qrr, Reverse Recovery Charge (nC) TYPICAL PERFORMANCE CHARACTERISTICS (continued) di/dt, (A/ms) ZthJC, Thermal Response (t) Figure 11. Reverse Recovery Charge t1, Square Wave Pulse Duration (s) Figure 12. Transient Thermal Response Curve www.onsemi.com 5 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−247−2LD CASE 340CL ISSUE A DATE 03 DEC 2019 GENERIC MARKING DIAGRAM* AYWWZZ XXXXXXX XXXXXXX XXXX A Y WW ZZ = Specific Device Code = Assembly Location = Year = Work Week = Assembly Lot Code *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. DOCUMENT NUMBER: DESCRIPTION: 98AON13850G TO−247−2LD Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative