BAS16WT1G
Silicon Switching Diode
Features
• S and NSV Prefix for Automotive and Other Applications Requiring
•
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
http://onsemi.com
1
ANODE
3
CATHODE
MAXIMUM RATINGS (TA = 25°C)
Rating
Symbol
Value
Unit
Continuous Reverse Voltage
VR
100
V
Recurrent Peak Forward Current
IR
200
mA
IFM(surge)
500
mA
Peak Forward Surge Current
Pulse Width = 10 ms
Total Power Dissipation,
One Diode Loaded TA = 25°C
Derate above 25°C
Mounted on a Ceramic Substrate
(10 x 8 x 0.6 mm)
Operating and Storage Junction
Temperature Range
PD
TJ, Tstg
200
mW
1.6
mW/°C
−55 to
+150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance,
Junction−to−Ambient
One Diode Loaded
Mounted on a Ceramic Substrate
(10 x 8 x 0.6 mm)
Symbol
Max
Unit
RqJA
625
°C/W
MARKING
DIAGRAM
A6 MG
G
SC−70
CASE 419
STYLE 2
1
A6
= Specific Device Code
M
= Date Code
G
= Pb−Free Package
(*Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping†
BAS16WT1G
SC−70
(Pb−Free)
3000 / Tape & Reel
SBAS16WT1G
SC−70
(Pb−Free)
3000 / Tape & Reel
NSVBAS16WT3G
SC−70
(Pb−Free)
10000 / Tape &
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2014
March, 2014− Rev. 11
1
Publication Order Number:
BAS16WT1/D
BAS16WT1G
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
−
−
−
−
715
866
1000
1250
−
−
−
1.0
50
30
CD
−
2.0
pF
trr
−
6.0
ns
Stored Charge
(IF = 10 mA to VR = 6.0 V, RL = 500 W) (Figure 2)
QS
−
45
PC
Forward Recovery Voltage
(IF = 10 mA, tr = 20 ns) (Figure 3)
VFR
−
1.75
V
Forward Voltage
(IF = 1.0 mA)
(IF = 10 mA)
(IF = 50 mA)
(IF = 150 mA)
VF
Reverse Current
(VR = 100 V)
(VR = 75 V, TJ = 150°C)
(VR = 25 V, TJ = 150°C)
IR
Capacitance
(VR = 0, f = 1.0 MHz)
Reverse Recovery Time
(IF = IR = 10 mA, RL = 50 W) (Figure 1)
http://onsemi.com
2
Unit
mV
mA
BAS16WT1G
1 ns MAX
DUT
500 W
t
trr
10%
tif
50 W
DUTY CYCLE = 2%
90%
VF
Irr
100 ns
Figure 1. Reverse Recovery Time Equivalent Test Circuit
OSCILLOSCOPE
R . 10 MW
C 3 7 pF
500 W
VC
DUT
BAW62
VCM
20 ns MAX
D1
t
10%
243 pF
100 KW
Qa
VCM +
C
DUTY CYCLE = 2%
t
90%
Vf
400 ns
Figure 2. Stored Charge Equivalent Test Circuit
V
120 ns
450 W
1 KW
V
90%
DUT
Vfr
t
10%
DUTY CYCLE = 2%
2 ns MAX
Figure 3. Forward Recovery Voltage Equivalent Test Circuit
http://onsemi.com
3
50 W
BAS16WT1G
10
100
IR , REVERSE CURRENT (μA)
10
TA = 85°C
TA = 25°C
1.0
TA = -40°C
TA = 125°C
1.0
TA = 85°C
0.1
TA = 55°C
0.01
TA = 25°C
0.001
0.1
0.2
0.4
0.6
0.8
1.0
VF, FORWARD VOLTAGE (VOLTS)
10
0
1.2
Figure 4. Forward Voltage
20
30
40
VR, REVERSE VOLTAGE (VOLTS)
Figure 5. Leakage Current
0.68
CD, DIODE CAPACITANCE (pF)
IF, FORWARD CURRENT (mA)
TA = 150°C
0.64
0.60
0.56
0.52
0
2
4
6
VR, REVERSE VOLTAGE (VOLTS)
Figure 6. Capacitance
http://onsemi.com
4
8
50
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SC−70 (SOT−323)
CASE 419
ISSUE R
DATE 11 OCT 2022
SCALE 4:1
GENERIC
MARKING DIAGRAM
XX MG
G
1
XX
M
G
= Specific Device Code
= Date Code
= Pb−Free Package
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
STYLE 1:
CANCELLED
STYLE 6:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
DOCUMENT NUMBER:
DESCRIPTION:
STYLE 2:
PIN 1. ANODE
2. N.C.
3. CATHODE
STYLE 3:
PIN 1. BASE
2. EMITTER
3. COLLECTOR
STYLE 4:
PIN 1. CATHODE
2. CATHODE
3. ANODE
STYLE 5:
PIN 1. ANODE
2. ANODE
3. CATHODE
STYLE 7:
PIN 1. BASE
2. EMITTER
3. COLLECTOR
STYLE 8:
PIN 1. GATE
2. SOURCE
3. DRAIN
STYLE 9:
PIN 1. ANODE
2. CATHODE
3. CATHODE-ANODE
STYLE 10:
PIN 1. CATHODE
2. ANODE
3. ANODE-CATHODE
98ASB42819B
SC−70 (SOT−323)
STYLE 11:
PIN 1. CATHODE
2. CATHODE
3. CATHODE
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative