RND0.8ZHH-M6

The RNS / RND Series of converters are industry standard, 2 × 1” size, low profile, single- and double-output DC-DC converters intended for SMT placement and reflow soldering. The product provides onboard conversion of a wide range of standard telecom, datacom and industrial input voltages to isolated low output voltages without the need for any additional cooling. Proprietary patented manufacturing process ensures optimal quality through full process automation. The converters are cost effective high performance alternatives to competing products on the market. • • • • • • • • • • • • • • • RoHS lead-free and lead-solder-exempt products are available Single- and double-output models Basic isolation 1500 VDC I/O electric strength test voltage Synchronization function Low profile – 8.5 mm height Excellent co-planarity Convection cooling Low conducted and radiated EMI Wide input range Output overcurrent protection Remote on/off (primary referenced) Output voltage trim adjust, positive or negative Operating temperature up to 110°C Approved to the latest edition of the following standards: UL/CSA60950-1, IEC60950-1 and EN60950-1 • • • • • Distributed power architectures Telecommunications equipment LAN/WAN applications Industrial applications Data processing RNS / RND Series 2 RNS01EE-M6 INPUT VOLTAGE VDC 18 – 72 MAX INPUT CURRENT A 0.5 OUTPUT VOLTAGE V 3.30 OUTPUT RATED CURRENT A 1.5 OUTPUT RIPPLE/NOISE mVPP 25 TYPICAL EFFICIENCY % 78 RNS03ZE-M6 38 – 75 0.4 2.50 2 / 3.30 3.0 50 79 RNS01EG-M6 18 – 72 0.5 5.05 1.2 25 79 RNS02ZG-M6 38 – 75 0.4 5.05 2.0 50 83 RNS0.9ET-M6 18 – 72 0.5 7.00 0.9 25 80 RNS0.6ZH-M6 38 – 75 0.3 12.0 / 15.0 2 0.6 40 83 INPUT VOLTAGE VDC MAX. INPUT CURRENT A TYPICAL EFFICIENCY % 38 – 75 0.4 OUTPUT RATED CURRENT A 1.0 OUTPUT RIPPLE/NOISE mVPP RND02ZGE-M6 OUTPUT VOLTAGE V +3.27 +5.20 1.0 50 81 RND02ZGG-M6 38 – 75 0.4 ±5.10 ± 1.0 50 81 RND0.8ZHH-M6 36 – 75 0.4 ±12.0 / ±15.0 2 ± 0.42 50 85 MODEL1 MODEL1 Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect long-term reliability and cause permanent damage to the converter. All specifications apply over specified input voltage, output load and temperature range, unless otherwise noted. PARAMETER CONDITIONS / DESCRIPTION MIN MAX UNIT Input voltage (Vin) Continuous RNS01EE/RNS01EG/RNS0.9ET All other models (18) 38 (72) 75 VDC VDC Transient input voltage (Vint) Transient, 100 ms 100 VDC Operating CaseTemp. (Tc) All operating conditions -45 110 C -55 125 C -5 16 V Storage Temperature (Ts) ON/OFF Control Voltage (Vrc) Referenced to -Vin PARAMETER CONDITIONS / DESCRIPTION Shock Sinusoidal Vibration MIN NOM MAX UNIT IEC68-2-27 100 g IEC68-2-6 10 g 0.6/17 oz/g Weight Water Washing Standard process MTBF Per Bellcore TR-NWT-000332 (100% load at 25 C,GB) Yes 4590 1000 h 1 Add G to the end of the part number for products, which comply to RoHS for all 6 substances. 2 Output voltage adjusted using the trim function. tech.support@psbel.com RNS / RND Series PARAMETER 3 CONDITIONS / DESCRIPTION MIN Insulation Safety Rating NOM MAX UNIT Basic insulation Electriic strength test voltage 1500 Insulation Resistance (Rps) VDC 10 Insulation Capacitance (Cps) M 2200 pF PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNIT Input Voltage (Vin) Continuous (4:1 input range) Continuous standard input range (18) 38 (48) 48 (72) 75 VDC Input current when shut down Vin.Nom, Remote Control activated 3 mA Input Current No Load Vin.Nom, Io = 0 (4:1 range) Vin.Nom, Io = 0 std input range (30) 10 mA Turn-On Input Voltage 18-72 Vin Ramping Up, Io.Max 16.5 17.5 18 Turn-Off Input Voltage 18-72 Vin Ramping Down, Io.Max 15.5 16 16.5 Turn-On Input Voltage 38-75 Vin Ramping Up, Io.Max 34 36 38 Turn-Off Input Voltage 38-75 Vin Ramping Down, Io.Max 30 33 36 Turn-On Time To Output Regulation Band After Remote Control Rise Time 250 25 5 400 ms Input Reflected Ripple Current Vin.Max, Io.Max 30 mAp-p 1.4 F V V Input Capacitance PARAMETER CONDITIONS / DESCRIPTION Input Voltage (Vin) Continuous MIN Input Current when Shutdown Vin.Nom, Rem. Cont. activated Input Current No Load Vin.Nom, Io = 0 Turn-On Input Voltage (-ZGG) Ramping Up, Io.Max 27.5 29 31.5 Turn-Off Input Voltage (-ZGG) Ramping Down, Io.Max 26.5 28 30.5 Turn-On Input Voltage (-ZHH) Ramping Up, Io.Max 32 34.5 36 Turn-Off Input Voltage (-ZHH) Ramping Down, Io.Max 30 33.5 35 Turn-On Input Voltage (-ZGE) Ramping Up, Io.Max 34 36.5 38 Turn-Off Input Voltage (-ZGE) Ramping Down, Io.Max 30 34.5 36 Turn-On Time To Output Regulation Band After Remote Control Rise Time 250 25 5 400 ms Input Reflected Ripple Current Vin.Max, Io.Max 30 mAp-p 1.4 F 36 (38) NOM 48 MAX UNIT 75 VDC 3 mA 10 mA V V V Input Capacitance Europe, Middle East +353 61 225 977 North America +1 408 785 5200 © 2017 Bel Power Solutions & Protection BCD.00038_AB Asia-Pacific +86 755 298 85888 RNS / RND Series 4 All specifications apply over input voltage, output load and temperature of 25 C, unless otherwise noted. PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX 3.30 3.3 VDC 1.5 ADC Output Voltage Setpoint Accuracy Vo Vin.Nom, Io = 1.5 A, 25 C 3.27 Output Current * Io Vin.Min to Vin.Max 0.15 UNIT Line Regulation Vin.Min to Vin.Max, 50% Io.Max 25 70 mV Load Regulation Vin.Nom, Io.Min to Io.Max 35 90 mV Dynamic Regulation Peak Deviation Settling Time 50-100% Io.Max load step change. to 1% error band 300 300 ± mV s 50 mVp-p 2,200 F 150 %Io.Max Output Voltage Ripple Vin.Min to Vin.Max, Io.Min to Io Max, 20 MHz Bandwidth Vr Admissible Load Capacitance Comax Io.Max, Vin.Nom Output Current Limit Threshold Icl Vout ≤0.90 Vo.Nom Switching Frequency Fs Vin.Nom, Io.Max Temperature Coefficient 25 110 410 kHz Tco Trim Range Vt Io.Min to Io.Max, Vin.Min to Vin.Max 2.75 0.02 %Vo/C 3.85 Vo * At Iout