RGCL60TS60GC13

RGCL60TS60GC13 Datasheet 600V 30A Field Stop Trench IGBT Outline VCES 600V IC(100°C) 30A VCE(sat) (Typ.) 1.4V PD 111W TO-247GE (1)(2)(3) Features Inner Circuit 1) Low Collector - Emitter Saturation Voltage (2) (1) Gate (2) Collector (3) Emitter 2) Soft Switching 3) Pb - free Lead Plating ; RoHS Compliant (1) (3) Applications Packaging Specifications Partial Switching PFC Packaging Discharge Circuit Reel Size (mm) - Tape Width (mm) - Brake for Inverter Tube Type Basic Ordering Unit (pcs) 600 Taping Code C13 Marking RGCL60TS60 Absolute Maximum Ratings (at TC = 25°C unless otherwise specified) Parameter Symbol Value Unit Collector - Emitter Voltage VCES 600 V Gate - Emitter Voltage VGES 30 V TC = 25°C IC 48 A TC = 100°C IC 30 A 120 A Collector Current Pulsed Collector Current Power Dissipation ICP *1 TC = 25°C PD 111 W TC = 100°C PD 55 W Tj 40 to +175 °C Tstg 55 to +175 °C Operating Junction Temperature Storage Temperature *1 Pulse width limited by Tjmax. www.rohm.com © 2021 ROHM Co., Ltd. All rights reserved. 1/9 2021.09 - Rev.A Datasheet RGCL60TS60GC13 Thermal Resistance Values Parameter Unit Symbol Rθ(j-c) Thermal Resistance IGBT Junction - Case Min. Typ. Max. - - 1.34 °C/W IGBT Electrical Characteristics (at Tj = 25°C unless otherwise specified) Values Parameter Collector - Emitter Breakdown Voltage Symbol BVCES Conditions IC = 10μA, VGE = 0V Unit Min. Typ. Max. 600 - - V Collector Cut - off Current ICES VCE = 600V, VGE = 0V - - 10 μA Gate - Emitter Leakage Current IGES VGE = 30V, VCE = 0V - - 200 nA VGE(th) VCE = 5V, IC = 18.9mA 4.5 5.5 6.5 V Tj = 25°C - 1.4 1.8 V Tj = 175°C - 1.6 - Gate - Emitter Threshold Voltage IC = 30A, VGE = 15V Collector - Emitter Saturation Voltage www.rohm.com © 2021 ROHM Co., Ltd. All rights reserved. VCE(sat) 2/9 2021.09 - Rev.A Datasheet RGCL60TS60GC13 IGBT Electrical Characteristics (at Tj = 25°C unless otherwise specified) Values Parameter Symbol Conditions Unit Min. Typ. Max. Input Capacitance Cies VCE = 30V - 1600 - Output Capacitance Coes VGE = 0V - 38 - Reverse Transfer Capacitance Cres f = 1MHz - 29 - Total Gate Charge Qg VCE = 300V - 68 - Gate - Emitter Charge Qge IC = 30A - 13 - Gate - Collector Charge Qgc VGE = 15V - 27 - Turn - on Delay Time td(on) IC = 30A, VCC = 400V - 44 - tr VGE = 15V, RG = 10Ω - 27 - Tj = 25°C - 186 - Inductive Load - 178 - Rise Time pF nC ns Turn - off Delay Time Fall Time td(off) tf Turn - on Switching Loss Eon *Eon includes diode - 0.77 - Turn - off Switching Loss Eoff reverse recovery - 1.11 - Turn - on Delay Time td(on) IC = 30A, VCC = 400V - 40 - tr VGE = 15V, RG = 10Ω - 45 - Tj = 175°C - 207 - Inductive Load - 272 - mJ Rise Time ns Turn - off Delay Time Fall Time td(off) tf Turn - on Switching Loss Eon *Eon includes diode - 0.97 - Turn - off Switching Loss Eoff reverse recovery - 1.54 - mJ IC = 120A, VCC = 480V Reverse Bias Safe Operating Area RBSOA VP = 600V, VGE = 15V FULL SQUARE - RG = 60Ω, Tj = 175°C www.rohm.com © 2021 ROHM Co., Ltd. All rights reserved. 3/9 2021.09 - Rev.A Datasheet RGCL60TS60GC13 Electrical Characteristic Curves Fig.1 Power Dissipation vs. Case Temperature Fig.2 Collector Current vs. Case Temperature 140 60 50 Collector Current : IC [A] Power Dissipation : PD [W] 120 100 80 60 40 20 0 40 30 20 　10 Tj≦175ºC VGE≧15V 0 0 25 50 75 100 125 150 175 0 25 50 75 100 125 150 175 Case Temperature : Tc [ºC] Case Temperature : Tc [ºC] Fig.3 Forward Bias Safe Operating Area Fig.4 Reverse Bias Safe Operating Area 160 1000 10µs Collector Current : IC [A] Collector Current : IC [A] 140 100 10 100µs 1 0.1 TC= 25ºC Single Pulse 120 100 80 60 40 Tj≦175ºC VGE=15V 20 0.01 0 1 10 100 1000 0 Collector To Emitter Voltage : VCE[V] www.rohm.com © 2021 ROHM Co., Ltd. All rights reserved. 200 400 600 800 Collector To Emitter Voltage : VCE[V] 4/9 2021.09 - Rev.A Datasheet RGCL60TS60GC13 Electrical Characteristic Curves Fig.5 Typical Output Characteristics Fig.6 Typical Output Characteristics 120 120 Tj= 175ºC Tj= 25ºC VGE= 15V 80 VGE= 12V VGE= 10V 60 VGE= 8V 40 VGE= 15V VGE= 12V 80 VGE= 10V 60 40 VGE= 8V 20 20 0 0 0 1 2 3 4 0 5 Collector To Emitter Voltage : VCE[V] Fig.7 Typical Transfer Characteristics 1 2 3 4 5 Collector To Emitter Voltage : VCE[V] Fig.8 Typical Collector To Emitter Saturation Voltage vs. Junction Temperature 4 60 Collector To Emitter Saturation Voltage : VCE(sat) [V] VCE= 10V 50 Collector Current : IC [A] VGE= 20V 100 VGE= 20V Collector Current : IC [A] Collector Current : IC [A] 100 40 30 20 Tj= 175ºC 10 Tj= 25ºC 0 0 2 4 6 8 10 3 IC= 60A 2 IC= 30A IC= 15A 1 0 25 12 Gate To Emitter Voltage : VGE [V] www.rohm.com © 2021 ROHM Co., Ltd. All rights reserved. VGE= 15V 50 75 100 125 150 175 Junction Temperature : Tj [ºC] 5/9 2021.09 - Rev.A Datasheet RGCL60TS60GC13 Electrical Characteristic Curves Fig.9 Typical Collector To Emitter Saturation Voltage vs. Gate To Emitter Voltage Collector To Emitter Saturation Voltage : VCE(sat) [V] Collector To Emitter Saturation Voltage : VCE(sat) [V] 20 Tj= 25ºC IC= 60A 15 IC= 30A 10 Fig.10 Typical Collector To Emitter Saturation Voltage vs. Gate To Emitter Voltage IC= 15A 5 0 5 10 15 20 Tj= 175ºC 15 IC= 60A 10 IC= 30A IC= 15A 5 0 5 20 10 Gate To Emitter Voltage : VGE [V] 20 Gate To Emitter Voltage : VGE [V] Fig.12 Typical Switching Time vs. Gate Resistance Fig.11 Typical Switching Time vs. Collector Current 1000 1000 Switching Time [ns] tf Switching Time [ns] 15 td(off) 100 td(on) tf td(off) 100 tr td(on) VCC=400V, VGE=15V RG=10Ω, Tj=175ºC Inductive ｌoad tr VCC=400V, IC=30A VGE=15V, Tj=175ºC Inductive ｌoad 10 10 0 10 20 30 40 50 60 0 Collector Current : IC [A] www.rohm.com © 2021 ROHM Co., Ltd. All rights reserved. 10 20 30 40 50 Gate Resistance : RG [Ω] 6/9 2021.09 - Rev.A Datasheet RGCL60TS60GC13 Electrical Characteristic Curves Fig.13 Typical Switching Energy Losses vs. Collector Current Fig.14 Typical Switching Energy Losses vs. Gate Resistance 10 Switching Energy Losses [mJ] Switching Energy Losses [mJ] 10 Eoff 1 Eon 0.1 VCC=400V, VGE=15V RG=10Ω, Tj=175ºC Inductive ｌoad Eoff 1 Eon 0.1 VCC=400V, IC=30A VGE=15V, Tj=175ºC Inductive ｌoad 0.01 0.01 0 10 20 30 40 50 0 60 10 Collector Current : IC [A] 30 40 50 Gate Resistance : RG [Ω] Fig.15 Typical Capacitance vs. Collector To Emitter Voltage Fig.16 Typical Gate Charge 15 Cies 1000 100 Coes Cres 10 f=1MHz VGE=0V Tj=25ºC 1 0.01 Gate To Emitter Voltage : VGE [V] 10000 Capacitance [pF] 20 10 5 VCC=300V IC=30A Tj=25ºC 0 0.1 1 10 0 100 Collector To Emitter Voltage : VCE[V] www.rohm.com © 2021 ROHM Co., Ltd. All rights reserved. 10 20 30 40 50 60 70 Gate Charge : Qg [nC] 7/9 2021.09 - Rev.A Datasheet RGCL60TS60GC13 Electrical Characteristic Curves Fig.17 IGBT Transient Thermal Impedance Transient Thermal Impedance : ZthJC [ºC/W] 10 D= 0.5 0.1 0.2 1 0.1 Single Pulse 0.01 0.02 PDM t1 t2 Duty=t1/t2 Peak Tj=PDM×ZthJCTC 0.05 0.01 0.0001 0.001 0.01 0.1 1 Pulse Width : t1[s] www.rohm.com © 2021 ROHM Co., Ltd. All rights reserved. 8/9 2021.09 - Rev.A Datasheet RGCL60TS60GC13 Inductive Load Switching Circuit and Waveform Gate Drive Time 90% D.U.T. VGE 10% VG 90% IC 10% Fig.18 Inductive Load Circuit td(on) tr ton td(off) tf toff VCE 10% Eon Eoff VCE(sat) Fig.19 Inductive Load Waveform www.rohm.com © 2021 ROHM Co., Ltd. All rights reserved. 9/9 2021.09 - Rev.A Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications. 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products specified in this document are not designed to be radiation tolerant. 7) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 8) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 9) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 10) ROHM has used reasonable care to ensure the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 11) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 12) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 13) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. R1107 B Datasheet General Precaution 1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents. ROHM shall n ot be in an y way responsible or liabl e for fa ilure, malfunction or acci dent arising from the use of a ny ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s representative. 3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccur acy or errors of or concerning such information. Notice – WE © 2015 ROHM Co., Ltd. All rights reserved. Rev.001