RSH

Fuseholder Blocks & Clips www.schurter.com/pg02b Fuseholder Open Design, 6.3 x 32 mm, Solder RSH 250 VAC · 3.2 W / 10 A16 A (UL) Description Standards - Screw or rivet fastening - IEC 60127-6 - UL 512 - CSA C22.2 no. 39 References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Approvals - UL File Number: E39328 Technical Data Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC 6.3 x 32 mm Screw Screw or Rivet Solder 250 VAC 16 A (UL) 3.2 W / 10 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 00 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoset, black, UL 94V-0 Material: Terminals Nickel-Silver Unit Weight (Socket/Cap) 7.27 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Voltage, Current, Approvals Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Wave 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2 < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 Abmessungen 1.5 4.8 6.4 8 0.5 59.5 mm 14.5 4.8 6.4 16 ø3 59.5 59.5 ø 3.2 ø 6.3 41 41 3.7 1.9 145 1.9 14 3.8 18.5 Variant 0031.6001 Variant 0031.6010 Fuses 3.7  RSH www.schurter.com/pg02b Derating Curves for Fuseholders Admissible Power Acceptance in Watt 3.2 2.5 2.0 1.5 1.0 0.5 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In Fuseholder Blocks & Clips Ambient Air Temperature Ta °C Variants Holder l l Strip Order Number 0031.6001 0031.6010 Packaging Unit Bulk (100 pcs.) 2 The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.