PC713V3NSZX

PC713VxNSZX Series/PC713VxYSZX Series PC713VxNSZX Series/ PC713VxYSZX Series s Features 1. TTL compatible output 2. Isolation voltage (Viso (rms):5kV) 3. Recognized by UL, file No.E64380 Approved by TÜV (VDE0884)(PC713VxYSZX Series) 4. 6-pin DIP package High Isolation Voltage Type Photocoupler s Outline Dimensions (Unit : mm) Internal connection diagram 6 5 4 6 5 4 s Applications 1. Home appliances 2. Programmable controllers 3. Peripheral equipment of personal computers 6.5±0.3 Anode mark PC713V Rank mark 1 2 3 0.6±0.2 1.2±0.3 1 2 3 7.12±0.3 7.62±0.3 * Model No. PC713VxNSZX Series PC713VxYSZX Series * Application Model No. PC713V Safty Standard Approval UL TÜV(VDE0884) − 2.9±0.5 0.5 s Model Line-up 3.25±0.5 3.5±0.5 TYP. 0.26±0.1 θ 4 5 6 0.5 ±0.1 2.54±0.25 1 θ=0 to 13˚ θ Anode Cathode NC Emitter Collector Base s Absolute Maximum Ratings 2 (Ta=25°C) Unit mA A V mW V V V V mA mW mW kV °C °C °C 3 Parameter Symbol Rating 50 Forward current IF *1 Peak forward current IFM 1 Input Reverse voltage VR 6 Power dissipation P 70 Collector-emitter voltage VCEO 35 Emitter-collector voltage VECO 6 Collector-base voltage VCBO 35 Output Emitter-base voltage VEBO 6 IC 50 Collector current PC 150 Collector power dissipation 170 Total power dissipation Ptot *2 Isolation voltage Viso (rms) 5 Operating temperature −25 to +100 Topr −40 to +125 Tstg Storage temperature *3 260 Soldering temperature Tsol *1 Pulse width≤100µs, Duty ratio=0.001 *2 40 to 60%RH, AC for 1 min *3 For 10 s Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/ PC713VxNSZX Series/PC713VxYSZX Series s Electro-optical Characteristics Parameter Forward voltage Peak forward voltage Reverse current Terminal capacitance Collector dark current *4 Collector current Collector-emitter saturation voltage Isolation resistance Floating capacitance Cut-off frequency Rise time Response time Fall time Symbol VF VFM IR Ct ICEO IC Conditions IF=20mA IFM=0.5A VR=4V V=0, f=1kHz VCE=20V, IF=0, RBE=∞ IF=5mA, VCE=5V, RBE=∞ MIN. − − − − − 2.5 − TYP. 1.2 − − 30 − − 0.1 1011 0.6 80 4 3 MAX. 1.4 3.0 10 250 10−7 30 0.2 − 1.0 − 18 18 (Ta=25˚C) Unit V V µA pF A mA V Ω pF kHz µs µs Input Output Transfer characteristics VCE(sat) IF=20mA, IC=1mA, RBE=∞ 5×1010 RISO DC500V, 40 to 60%RH V=0, f=1MHz Cf − − VCE=5V, IC=2mA, RL=100Ω, RBE=∞ fC − tr VCE=2V, IC=2mA RL=100Ω, RBE=∞ − tf *4 Classification table of collector current is shown below. Model No. *5 Rank mark A PC713V1NSZX B PC713V2NSZX C PC713V3NSZX A or B PC713V5NSZX B or C PC713V6NSZX A, B or C PC713V8NSZX PC713V0NSZX A, B, C or no marking Measuring Conditions IF=5mA VCE=5V Ta=25°C *5 PC713VxYSZX Series are equivalent. IC (mA) 4.0 to 8.0 6.5 to 13.0 10.0 to 20.0 4.0 to 13.0 6.5 to 20.0 4.0 to 20.0 2.5 to 30.0 Fig.1 Forward Current vs. Ambient Temperature 60 Fig.2 Collector Power Dissipation vs. Ambient Temperature 200 Collector power dissipation PC (mW) 50 Forward current IF (mA) 150 40 30 100 20 50 10 0 -25 0 25 50 75 100 125 0 −25 0 25 50 75 100 125 Ambient temperature Ta (˚C) Ambient temperature Ta (˚C) PC713VxNSZX Series/PC713VxYSZX Series Fig.3 Peak Forward Current vs. Duty Ratio 10 000 5 000 Peak forward current IFM (mA) 2 000 1 000 500 200 100 50 20 10 5 5 10−3 2 5 10−2 2 5 10−1 2 5 1 Forward current IF (mA) Pulse width≤100µs Ta=25˚C Fig.4 Forward Current vs. Forward Voltage 500 200 100 50 20 10 5 2 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Ta=75˚C 50˚C 25˚C 0˚C −25˚C Duty ratio Forward voltage VF (V) Fig.5 Current Transfer Ratio vs. Forward Current 200 180 Current transfer ratio CTR (%) 160 140 120 100 80 60 40 20 0 1 2 5 10 20 50 Forward current IF (mA) 500kΩ 100kΩ RBE=∞ VCE=5V Ta=25˚C Fig.6 Collector Current vs. Collector-emitter Voltage 30 IF=30mA 25 Collector current IC (mA) PC (MAX.) 20 20mA RBE=∞ Ta=25˚C 15 10mA 5mA 10 5 0 0 1 2 3 4 5 6 7 8 9 Collector-emitter voltage VCE (V) Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature 150 IF=5mA VCE=5V RBE=∞ 100 Fig.8 Collector - emitter Saturation Voltage vs. Ambient Temperature Collector-emitter saturation voltage VCE(sat) (V) 0.14 IF=20mA 0.12 IC=1mA RBE=∞ 0.10 Relative current transfer ratio (%) 0.08 50 0.06 0.04 0.02 −30 0 −25 0 25 50 75 100 0 20 40 60 80 100 Ambient temperature Ta (˚C) Ambient temperature Ta(˚C) PC713VxNSZX Series/PC713VxYSZX Series Fig.9 Collector Dark Current vs. Ambient Temperature 10−5 10−6 Collector dark current ICEO (A) 10−7 10−8 10−9 10−10 10−11 −25 VCE=20V RBE=∞ Collector dark current ICBO (A) Fig.10 Collector-base Dark Current vs. Ambient Temperature 10−8 5 2 10−9 5 2 10−10 5 2 VCB=30V RBE=∞ 0 25 50 75 100 10−11 0 25 50 75 100 125 Ambient temperature Ta (˚C) Ambient temperature Ta (˚C) Fig.11 Response Time vs. Load Resistance 500 200 100 50 Response time (µs) 20 10 5 2 1 0.5 0.2 0.1 0.1 1 Load resistance RL (kΩ) 10 td ts VCE=2V IC=2mA RBE=∞ Ta=25˚C tr tf Fig.12 Test Circuit for Response Time VCC Input RD RL Output Input Output 10% 90% td tr ts tf Fig.13 Frequency Response VCE=5V IC=2mA RBE=∞ Ta=25˚C Fig.14 Test Circuit for Frequency Response 0 Voltage gain Av (dB) VCC RL Output −10 RL=10kΩ 1kΩ 100Ω RD −20 0.5 1 2 5 10 20 50 100 200 500 Frequency f (kHz) Application Circuits NOTICE qThe circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. qContact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. qObserve the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). qContact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications other than those recommended by SHARP or when it is unclear which category mentioned above controls the intended use. qIf the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices. qThis publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. qContact and consult with a SHARP representative if there are any questions about the contents of this publication. 115