GP10NC60HD

STGB10NC60HD - STGF10NC60HD STGP10NC60HD N-channel 600V - 10A - TO-220 - D2PAK - TO-220FP very fast PowerMESH™ IGBT Features Type STGB10NC60HD STGP10NC60HD STGF10NC60HD ■ ■ ■ VCES 600V 600V 600V IC VCE(sat) (Max)@ 25°C @100°C < 2.5V < 2.5V < 2.5V 10A 10A 6A 3 1 1 2 3 3 1 2 Low on-voltage drop (Vcesat) Low CRES / CIES ratio (no cross-conduction susceptibility) Very soft ultra fast recovery antiparallel diode D²PAK TO-220FP TO-220 Applications ■ ■ ■ High frequency motor controls Smps and pfc in both hard switch and resonant topologies Motor drivers Figure 1. Internal schematic diagram Description Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH™ IGBTs, with outstanding performances. The suffix “H” identifies a family optimized for high frequency applications in order to achieve very high switching performances (reduced tfall) manta in ing a low voltage drop. Table 1. Device summary Marking GB10NC60HD GP10NC60HD GF10NC60HD Package D²PAK TO-220 TO-220FP Packaging Tape & reel Tube Tube Order codes STGB10NC60HD STGP10NC60HD STGF10NC60HD October 2007 Rev 4 1/17 www.st.com 17 Contents STGB10NC60HD - STGP10NC60HD - STGF10NC60HD Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 7 3 4 5 6 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2/17 STGB10NC60HD - STGP10NC60HD - STGF10NC60HD Electrical ratings 1 Electrical ratings Table 2. Symbol VCES IC(1) IC(1) ICL(2) IF VGE PTOT VISO Tj Absolute maximum ratings Value Parameter TO-220 / D²PAK Collector-emitter voltage (VGE = 0) Collector current (continuous) at TC = 25°C Collector current (continuous) at TC = 100°C Collector current (pulsed) Diode RMS forward current at TC = 25°C Gate-emitter voltage Total dissipation at TC = 25°C Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25°C) Operating junction temperature 65 -– 55 to 150 20 10 40 10 ±20 23 2500 600 9 6 TO-220FP V A A A A V W V °C Unit 1. Calculated according to the iterative formula: T –T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------CC R ×V (T , I ) THJ – C CESAT ( MAX ) C C 2. Vclamp=80% of BVces, Tj=150°C, RG=10Ω, VGE=15V Table 3. Symbol Rthj-case Rthj-amb Thermal resistance Value Parameter TO-220 / D²PAK Thermal resistance junction-case max Thermal resistance junction-ambient max 1.9 62.5 TO-220FP 5 °C/W °C/W Unit 3/17 Electrical characteristics STGB10NC60HD - STGP10NC60HD - STGF10NC60HD 2 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 4. Symbol Static Parameter Test conditions Min. Typ. Max. Unit Collector-emitter VBR(CES) breakdown voltage (VGE= 0) VCE(sat) VGE(th) ICES IGES gfs IC= 1mA 600 1.9 1.7 3.75 2.5 V V V V µA mA nA S Collector-emitter saturation VGE= 15V, IC= 5A voltage VGE= 15V, IC= 5A, Tc= 125°C Gate threshold voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= VGE, IC= 250 µA VCE= Max rating,TC= 25°C VCE=Max rating,TC= 125°C VGE= ±20V VCE = 15V, IC= 5A 5.75 150 1 ±100 3.5 Table 5. Symbol Cies Coes Cres Qg Qge Qgc Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 5A, VGE = 15V, (see Figure 19) Min. Typ. 365 43 8.3 19.2 4.5 7 Max. Unit pF pF pF nC nC nC 4/17 STGB10NC60HD - STGP10NC60HD - STGF10NC60HD Electrical characteristics Table 6. Symbol Switching on/off (inductive load) Parameter Test conditions VCC = 390V, IC = 5A Min. Typ. Max. Unit td(on) tr (di/dt)on Turn-on delay time Current rise time Turn-on current slope , RG= 10Ω VGE= 15V, Tj= 25°C (see Figure 18) (see Figure 20) VCC = 390V, IC = 5A , RG= 10Ω VGE= 15V, Tj=125°C (see Figure 18) (see Figure 20) Vcc = 390V, IC = 5A, , RGE = 10Ω VGE = 15V,TJ=25°C (see Figure 18) (see Figure 20) Vcc = 390V, IC = 5A, RGE=10Ω VGE =15V, , Tj=125°C (see Figure 18) (see Figure 20) 14.2 5 1000 ns ns A/µs td(on) tr (di/dt)on Turn-on delay time Current rise time Turn-on current slope 14 5 920 ns ns A/µs tr(Voff) td(off) tf Off voltage rise time Turn-off delay time Current fall time 27 72 85 ns ns ns tr(Voff) td(off) tf Off voltage rise time Turn-off delay time Current fall time 50 108 139 ns ns ns Table 7. Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets Switching energy (inductive load) Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390V, IC = 5A , RG= 10Ω VGE=15V, Tj=25°C (see Figure 18) VCC = 390V, IC = 5A , RG= 10Ω VGE= 15V, Tj= 125°C (see Figure 18) Min. Typ. 31.8 95 126.8 61.8 173 234.8 Max. Unit µJ µJ µJ µJ µJ µJ 1. Eon is the turn-on losses when a typical diode is used in the test circuit in Figure 18. If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25°C and 125°C) 2. Turn-off losses include also the tail of the collector current 5/17 Electrical characteristics STGB10NC60HD - STGP10NC60HD - STGF10NC60HD Table 8. Symbol Vf trr Qrr Irrm trr Qrr Irrm Collector-emitter diode Parameter Forward on-voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions If = 2.5A If = 2.5A, Tj = 125°C If = 5A,VR = 40V, Tj = 25°C, di/dt = 100 A/µs (see Figure 21) If = 5A,VR = 40V, Tj =125°C, di/dt = 100A/µs (see Figure 21) Min. Typ. 1.75 1.3 21.5 14.2 1.32 33 30.5 1.85 Max. 2.1 Unit V V ns nC A ns nC A 6/17 STGB10NC60HD - STGP10NC60HD - STGF10NC60HD Electrical characteristics 2.1 Figure 2. Electrical characteristics (curves) Output characteristics Figure 3. Transfer characteristics Figure 4. Transconductance Figure 5. Collector-emitter on voltage vs temperature Figure 6. Gate charge vs gate-source voltage Figure 7. Capacitance variations 7/17 Electrical characteristics Figure 8. STGB10NC60HD - STGP10NC60HD - STGF10NC60HD Figure 9. Collector-emitter on voltage vs collector current Normalized gate threshold voltage vs temperature Figure 10. Normalized breakdown voltage vs temperature Figure 11. Switching losses vs temperature Figure 12. Switching losses vs gate resistance Figure 13. Switching losses vs collector current 8/17 STGB10NC60HD - STGP10NC60HD - STGF10NC60HD Figure 14. Thermal Impedance for TO-220 / D²PAK Electrical characteristics Figure 15. Turn-off SOA Figure 16. Thermal Impedance for TO-220FP Figure 17. Emitter-collector diode characteristics 9/17 Test circuit STGB10NC60HD - STGP10NC60HD - STGF10NC60HD 3 Test circuit Figure 19. Gate charge test circuit Figure 18. Test circuit for inductive load switching Figure 20. Switching waveform Figure 21. Diode recovery time waveform 10/17 STGB10NC60HD - STGP10NC60HD - STGF10NC60HD Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/17 Package mechanical data STGB10NC60HD - STGP10NC60HD - STGF10NC60HD TO-220 mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 4.40 0.61 1.14 0.49 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6 inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116 12/17 STGB10NC60HD - STGP10NC60HD - STGF10NC60HD Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0º 4.88 15 1.27 1.4 2.4 0.4 4º 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch 3 1 13/17 Package mechanical data STGB10NC60HD - STGP10NC60HD - STGF10NC60HD TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Ø A B L3 L6 L7 F1 F D G1 H F2 L2 L5 E 123 L4 14/17 G STGB10NC60HD - STGP10NC60HD - STGF10NC60HD Packaging mechanical data 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 15/17 Revision history STGB10NC60HD - STGP10NC60HD - STGF10NC60HD 6 Revision history Table 9. Date 30-Jan-2006 06-Nov-2006 08-Feb-2007 05-Oct-2007 Document revision history Revision 1 2 3 4 Initial release. Complete version The document has been reformatted Added TO-220FP, Table 2 has been updated Changes 16/17 STGB10NC60HD - STGP10NC60HD - STGF10NC60HD Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17