TSV6290AILT

TSV6290, TSV6290A, TSV6291, TSV6291A Micropower with high merit factor CMOS operational amplifiers Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Low supply voltage: 1.5 V – 5.5 V Rail-to-rail input and output Low input offset voltage: 800 µV max (A version) Low power consumption: 29 µA typical Gain bandwidth product: 1.3 MHz typical Stable when used in gain configuration Micropackages: SC70-5/6, SOT23-5/6 Low input bias current: 1 pA typical Extended temperature range: -40 to +125°C 4 kV human body model In+ 1 VCC- 2 In- 3 + _ 5 VCC+ 4 Out TSV6291ICT/ILT SC70-5/SOT23-5 6 VCC+ + _ In+ 1 VCC- 2 In- 3 5 SHDN 4 Out TSV6290ICT/ILT SC70-6/SOT23-6 Applications ■ ■ ■ ■ ■ Battery-powered applications Portable devices Signal conditioning Active filtering Medical instrumentation The TSV6290 comes with a shutdown function. The TSV6290 and TSV6291 present a high tolerance to ESD, sustaining 4 kV for the human body model. Additionally, the TSV6290 and TSV6291 are offered in SC70-5/6 and SOT23-5/6 micropackages, with extended temperature ranges from -40° C to +125° C. All these features make the TSV629x ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering. Description The TSV6290 and the TSV6291 are single operational amplifiers with a high bandwidth while consuming only 29 µA. They must be used in a gain configuration (G+4). With a very low input bias current and low offset voltage (800 µV maximum for the A version), the TSV629x family of devices is ideal for applications requiring precision. The devices can operate at a power supply ranging from 1.5 to 5.5 V, and therefore suit battery-powered devices, extending battery life. March 2010 Doc ID 17117 Rev 1 1/23 www.st.com 23 Contents TSV6290, TSV6290A, TSV6291, TSV6291A Contents 1 2 3 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 Operating voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Rail-to-rail input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Rail-to-rail output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Shutdown function (TSV6290) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Optimization of DC and AC parameters . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Driving resistive and capacitive loads . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PCB layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Macromodel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.1 4.2 4.3 4.4 SOT23-5 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 SOT23-6 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 SC70-5 (or SOT323-5) package mechanical data . . . . . . . . . . . . . . . . . . 18 SC70-6 (or SOT323-6) package mechanical data . . . . . . . . . . . . . . . . . . 19 5 6 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2/23 Doc ID 17117 Rev 1 TSV6290, TSV6290A, TSV6291, TSV6291A Absolute maximum ratings and operating conditions 1 Absolute maximum ratings and operating conditions Table 1. Symbol VCC Vid Vin Iin SHDN Tstg Supply voltage (1) (2) Absolute maximum ratings (AMR) Parameter Value 6 ±VCC VCC- -0.2 to VCC+ +0.2 10 (3) Unit V V V mA V °C Differential input voltage Input voltage Input current (3) (4) Shutdown voltage VCC- -0.2 to VCC+ +0.2 -65 to +150 205 250 240 232 150 4 300 1.5 200 Storage temperature Thermal resistance junction to ambient(5)(6) SC70-5 SOT23-5 SOT23-6 SC70-6 Maximum junction temperature HBM: human body model(7) model(9) model(8) Rthja °C/W Tj ESD °C kV V kV mA MM: machine CDM: charged device Latch-up immunity 1. All voltage values, except differential voltage, are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. Vcc-Vin must not exceed 6 V, Vin must not exceed 6 V. 4. Input current must be limited by a resistor in series with the inputs. 5. Short-circuits can cause excessive heating and destructive dissipation. 6. Rth are typical values. 7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 8. Machine mode: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating. 9. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground. Table 2. Symbol VCC Vicm Toper Operating conditions Parameter Supply voltage Common mode input voltage range Operating free air temperature range Value 1.5 to 5.5 VCC- -0.1 to VCC+ +0.1 -40 to +125 Unit V V °C Doc ID 17117 Rev 1 3/23 Electrical characteristics TSV6290, TSV6290A, TSV6291, TSV6291A 2 Table 3. Symbol Electrical characteristics Electrical characteristics at VCC+ = +1.8 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, and RL connected to VCC/2 (unless otherwise specified) Parameter Conditions Min. Typ. Max. Unit DC performance TSV6290-TSV6291 TSV6290A-TSV6291A Vio Offset voltage Tmin < Top < Tmax TSV6290-TSV6291 TSV6290A-TSV6291A 2 1 Tmin < Top < Tmax 1 1 Tmin < Top < Tmax 0 V to 1.8 V, Vout = 0.9 V Tmin < Top < Tmax RL= 10 kΩ Vout= 0.5 V to 1.3 V , Tmin < Top < Tmax High level output voltage RL = 10 kΩ Tmin < Top < Tmax Low level output voltage RL = 10 kΩ Tmin < Top < Tmax Isink Iout Isource Vout = 1.8 V Tmin < Top < Tmax Vout = 0 V Tmin < Top < Tmax ICC Supply current (per operator) No load, Vout = VCC/2 Tmin < Top < Tmax 6 4 6 4 25 31 33 µA 10 mA 12 mA 53 51 78 73 35 50 4 35 mV 50 5 mV 95 dB 1 74 dB 10 pA 100 10 pA 100 4 0.8 mV 6 2 μV/°C DVio Iio Input offset voltage drift Input offset current(1) (Vout = VCC/2) Input bias current(1) (Vout = VCC/2) Common mode rejection ratio 20 log (ΔVic/ΔVio) Large signal voltage gain Iib CMR Avd VOH VOL AC performance GBP Gain SR Gain bandwidth product Minimum gain for stability Slew rate RL = 10 kΩ CL = 100 pF , Phase margin = 60°, Rf = 10 kΩ, , RL = 10 kΩ CL = 20 pF RL = 10 kΩ, CL = 100 pF, Vout = 0.5 V to 1.3 V 1.1 +4 -3 0.33 MHz V/V V/μs 1. Guaranteed by design. 4/23 Doc ID 17117 Rev 1 TSV6290, TSV6290A, TSV6291, TSV6291A Table 4. Symbol DC performance SHDN = VCCICC Supply current in shutdown mode (all operators) Tmin < Top < 85° C Tmin < Top < 125° C ton toff VIH VIL IIH IIL IOLeak Amplifier turn-on time Amplifier turn-off time SHDN logic high SHDN logic low SHDN current high SHDN current low Output leakage in shutdown mode SHDN = VCC+ SHDN = VCCSHDN = VCCTmin < Top < Tmax , RL = 5 kΩ Vout = VCC- to VCC- + 0.2 V , RL = 5 kΩ Vout = VCC+ - 0.5 to VCC+ - 0.7 V 1.3 Electrical characteristics Shutdown characteristics VCC = 1.8 V (TSV6290) Parameter Conditions Min. Typ. Max. Unit 2.5 50 200 1.5 nA nA µA ns ns V 300 30 0.5 10 10 50 1 V pA pA pA nA Doc ID 17117 Rev 1 5/23 Electrical characteristics Table 5. Symbol DC performance TSV6290, TSV6290A, TSV6291, TSV6291A VCC+ = +3.3 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, RL connected to VCC/2 (unless otherwise specified) Parameter Min. Typ. Max. Unit TSV6290-TSV6291 TSV6290A-TSV6291A Vio Offset voltage Tmin < Top < Tmax TSV6290-TSV6291 TSV6290A-TSV6291A 2 1 Tmin < Top < Tmax Input bias current(1) Tmin < Top < Tmax Common mode rejection ratio 20 log (ΔVic/ΔVio) Large signal voltage gain 0 V to 3.3 V, Vout = 1.65 V Tmin < Top < Tmax RL=10 kΩ Vout = 0.5 V to 2.8 V , Tmin < Top < Tmax High level output voltage RL = 10 kΩ Tmin < Top < Tmax Low level output voltage RL = 10 kΩ Tmin < Top < Tmax Isink Iout Isource Vout = 5 V Tmin < Top < Tmax Vout = 0 V Tmin < Top < Tmax ICC Supply current (per operator) No load, Vout = 2.5 V Tmin < Top < Tmax 23 20 23 20 26 38 45 57 53 81 76 35 50 4 5 98 1 1 1 79 4 0.8 mV 6 2 μV/°C 10 100 10 100 pA pA pA pA dB dB dB dB mV 35 mV 50 mA DVio Iio Input offset voltage drift Input offset current(1) Iib CMR Avd VOH VOL mA 33 35 µA µA AC performance GBP Gain SR Gain bandwidth product Minimum gain for stability Slew rate , RL = 10 kΩ CL = 100 pF Phase margin = 60°, Rf = 10 kΩ, RL = 10 kΩ CL = 20 pF , RL = 10 kΩ, CL = 100 pF, Vout = 0.5 V to 2.8 V 1.2 +4 -3 0.4 MHz V/V V/μs 1. Guaranteed by design. 6/23 Doc ID 17117 Rev 1 TSV6290, TSV6290A, TSV6291, TSV6291A Table 6. Symbol DC performance TSV6290-TSV6291 TSV6290A-TSV6291A Vio Offset voltage Tmin < Top < Tmax TSV6290-TSV6291 TSV6290A-TSV6291A Electrical characteristics VCC+ = +5 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, RL connected to VCC/2 (unless otherwise specified) Parameter Min. Typ. Max. Unit 4 0.8 mV 6 2 2 1 10 100 10 100 μV/°C pA pA pA pA dB DVio Iio Input offset voltage drift Input offset current(1) Tmin < Top < Tmax Input bias current(1) Tmin < Top < Tmax Common mode rejection ratio 20 log (ΔVic/ΔVio) 0 V to 5 V, Vout = 2.5 V Tmin < Top < Tmax 60 55 75 73 85 80 35 50 1 1 1 80 Iib CMR SVR Supply voltage rejection ratio 20 VCC = 1.8 to 5 V log (ΔVCC/ΔVio) Tmin < Top < Tmax Large signal voltage gain RL=10 kΩ Vout = 0.5 V to 4.5 V , Tmin < Top < Tmax High level output voltage RL = 10 kΩ Tmin < Top < Tmax Low level output voltage RL = 10 kΩ Tmin < Top < Tmax Isink Vout = 5 V Tmin < Top < Tmax Vout = 0 V Tmin < Top < Tmax No load, Vout = 2.5 V Tmin < Top < Tmax 102 dB 98 dB Avd 7 mV 6 35 mV 50 VOH VOL 40 35 40 35 69 mA 74 mA 30 36 38 µA µA Iout Isource ICC Supply current (per operator) AC performance GBP Gain SR Gain bandwidth product Minimum gain for stability Slew rate RL = 10 kΩ CL = 100 pF , Phase margin = 60°, Rf = 10 kΩ, RL = 10 kΩ CL = 20 pF , RL = 10 kΩ, CL = 100 pF, Vout = 0.5 V to 4.5 V 1.3 +4 -3 0.5 MHz V/V V/μs Doc ID 17117 Rev 1 7/23 Electrical characteristics Table 6. Symbol en TSV6290, TSV6290A, TSV6291, TSV6291A VCC+ = +5 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C, RL connected to VCC/2 (unless otherwise specified) (continued) Parameter Equivalent input noise voltage f = 1 kHz Av = -10, fin = 1 kHz, RL= 100 kΩ, Vicm = Vcc/2, Vin = 40 mVpp Min. Typ. 70 Max. Unit nV ----------Hz THD Total harmonic distortion 0.15 % 1. Guaranteed by design. Table 7. Symbol Shutdown characteristics VCC = 5 V (TSV6290) Parameter Conditions Min. Typ. Max. Unit DC performance SHDN = VIL ICC Supply current in shutdown mode (all operators) Tmin < Top < 85° C Tmin < Top < 125° C ton toff VIH VIL IIH IIL IOLeak Amplifier turn-on time Amplifier turn-off time SHDN logic high SHDN logic low SHDN current high SHDN current low Output leakage in shutdown mode SHDN = VCC+ SHDN = VCCSHDN = VCCTmin < Top < Tmax 10 10 50 1 RL = 5kΩ , Vout = VCC- to VCC- + 0.2V , RL = 5 kΩ Vout = VCC+ - 0.5 V to VCC+ - 0.7 V 4.5 0.5 300 30 5 50 200 1.5 nA nA µA ns ns V V pA pA pA nA 8/23 Doc ID 17117 Rev 1 TSV6290, TSV6290A, TSV6291, TSV6291A Electrical characteristics Figure 1. Supply current vs. supply voltage at Vicm = VCC/2 Figure 2. Output current vs. output voltage at VCC = 1.5 V Figure 3. Output current vs. output voltage at Figure 4. VCC = 5 V 20 Peaking at closed loop gain = -10 at VCC = 1.5 V and VCC = 5 V 15 Gain (dB) VCC=1.5V VCC=5V 10 5 Closed loop gain = -10 T=25 C,CLoad=100pF, Vicm=VCC/2, RLoad=2.2kΩ for Iout giving minimum stability on a typical part 0 10000 100000 Frequency (Hz) 1000000 Figure 5. 12 Peaking at closed loop gain = -3, VCC = 1.5 V RLoad=10kΩ Figure 6. 12 Peaking at closed loop gain = -3, VCC = 5 V RLoad=10kΩ 10 8 Gain (dB) 10 RLoad=100kΩ Gain (dB) RLoad=100kΩ RLoad=100kΩ to VCC/2 RLoad=10kΩ for Iout giving minimum stability on a typical part 8 6 4 2 0 10000 6 4 2 0 10000 RLoad=100kΩ to VCC/2 RLoad=10kΩ for Iout giving minimum stability on a typical part 100000 Frequency (Hz) 1000000 100000 Frequency (Hz) 1000000 Doc ID 17117 Rev 1 9/23 Electrical characteristics TSV6290, TSV6290A, TSV6291, TSV6291A Figure 7. Positive slew rate vs. supply voltage in closed loop Figure 8. Negative slew rate vs. supply voltage in closed loop RLoad=10kΩ, CLoad=100pF, ACL=− 10 Vin: from VCC+− 0.5V to 0.5V SR calculated from 10% to 90% Vicm=VCC/2 T=125°C T=− 40°C T=125°C Slew rate (V/ s) T=25°C T=− 40°C RLoad=10kΩ, CLoad=100pF, ACL=− 10 Vin: from 0.5V to VCC+− 0.5V SR calculated from 10% to 90% Vicm=VCC/2 Supply voltage (V) Slew rate (V/ s) T=25°C Supply voltage (V) Figure 9. Slew rate vs. supply voltage in open Figure 10. Slew rate timing in open loop loop Slew rate (V/ s) Open loop configuration, T = 25 C RLoad=10kΩ, CLoad=100pF, Vin=1VPP, Vicm=VCC/2 SR calculated from 0.5V to VCC-0.5V Amplitude (V) Open loop,RLoad=10kΩ CLoad=100pF, Vicm=VCC/2 T=25°C, VCC=5V, Vin = 1VPP Supply voltage (V) Time (µs) Figure 11. Slew rate timing in closed loop RLoad=10kΩ, CLoad=100pF, Vicm=VCC/2, ACL=− 10 T=25°C, VCC=5V Figure 12. Noise at VCC = 5 V Input equivalent noise density (nV/VHz) Vout Vicm=4.5V Amplitude (V) Vin Vicm=2.5V Vcc=5V T=25 C Time (µs) Frequency (Hz) 10/23 Doc ID 17117 Rev 1 TSV6290, TSV6290A, TSV6291, TSV6291A Figure 13. Distortion + noise vs. output voltage at VCC = 1.8 V Electrical characteristics Figure 14. Distortion + noise vs. output voltage at VCC = 5 V THD + N (%) THD + N (%) Ω Ω Ω Ω Output voltage (Vrms) Ouput voltage (Vrms) Figure 15. Distortion + noise vs. frequency at Figure 16. Distortion + noise vs. frequency at VCC = 1.8 V VCC = 5 V THD + N (%) THD + N (%) Ω Ω Ω Ω Frequency (Hz) Frequency (Hz) Doc ID 17117 Rev 1 11/23 Application information TSV6290, TSV6290A, TSV6291, TSV6291A 3 3.1 Application information Operating voltages The TSV6290 and TSV6291 can operate from 1.5 to 5.5 V. Their parameters are fully specified for 1.8, 3.3 and 5 V power supplies. However, the parameters are very stable in the full VCC range and several characterization curves show the TSV629x characteristics at 1.5 V. Additionally, the main specifications are guaranteed in extended temperature ranges from -40° C to +125° C. 3.2 Rail-to-rail input The TSV6290 and TSV6291 are built with two complementary PMOS and NMOS input differential pairs. The devices have a rail-to-rail input, and the input common-mode range is extended from VCC- -0.1 V to VCC+ +0.1 V. The transition between the two pairs appears at VCC+ -0.7 V. In the transition region, the performance of CMR, SVR, Vio and THD is slightly degraded (as shown in Figure 17 and Figure 18 for Vio vs. Vicm). Figure 17. Input offset voltage vs. input common mode at VCC = 1.5 V Figure 18. Input offset voltage vs. input common mode at VCC = 5 V The devices are guaranteed without phase reversal. 3.3 Rail-to-rail output The operational amplifiers’ output levels can go close to the rails: 35 mV maximum above and below the rail when connected to a 10 kΩ resistive load to VCC/2. 3.4 Shutdown function (TSV6290) The operational amplifier is enabled when the SHDN pin is pulled high. To disable the amplifier, the SHDN must be pulled down to VCC-. When in shutdown mode, the amplifier’s output is in a high impedance state. The SHDN pin must never be left floating, but tied to VCC+ or VCC-. 12/23 Doc ID 17117 Rev 1 TSV6290, TSV6290A, TSV6291, TSV6291A Application information The turn-on and turn-off times are calculated for an output variation of ±200 mV (Figure 19 and Figure 20 show the test configurations). Figure 19. Test configuration for turn-on time (Vout pulled down) + VCC Figure 20. Test configuration for turn-off time (Vout pulled down) + VCC GND 2 KΩ GND 2 KΩ VCC - 0.5 V + DUT - VCC - 0.5 V + DUT - GND GND Figure 21. Turn-on time, VCC = 5 V, Vout pulled down, T = 25° C Shutdown pulse Figure 22. Turn-off time, VCC = 5 V, Vout pulled down, T = 25° C Vcc = 5V T = 25°C Output voltage (V) Voltage (V) Vout Vout Vcc = 5V T = 25°C Shutdown pulse Time( s) Doc ID 17117 Rev 1 13/23 Application information TSV6290, TSV6290A, TSV6291, TSV6291A 3.5 Optimization of DC and AC parameters These devices use an innovative approach to reduce the spread of the main DC and AC parameters. An internal adjustment achieves a very narrow spread of the current consumption (29 µA typical, min/max at ±17%). Parameters linked to the current consumption value, such as GBP, SR and AVd, benefit from this narrow dispersion. 3.6 Driving resistive and capacitive loads These products are micropower, low-voltage operational amplifiers optimized to drive rather large resistive loads, above 5 kΩ For lower resistive loads, the THD level may significantly . increase. The amplifiers have a relatively low internal compensation capacitor, making them very fast while consuming very little. They are ideal when used in a non-inverting configuration or in an inverting configuration in the following conditions. ● ● IGainI ≥ 3 in an inverting configuration (CL = 20 pF, RL = 100 kΩ) or IgainI ≥ 10 (CL = 100 pF, RL = 100 kΩ) Gain ≥ +4 in a non-inverting configuration (CL = 20 pF, RL = 100 kΩ) or gain ≥ +11 (CL = 100 pF, RL= 100 kΩ) As these operational amplifiers are not unity gain stable, for a low closed-loop gain it is recommended to use the TSV62x (29 µA, 420 kHz) or TSV63x (60 µA, 880 kHz) which are unity gain stable. Table 8. Related products Icc (µA) at 5 V 29 29 60 60 GBP (MHz) 0.42 1.3 0.88 2.4 SR (V/µs) 0.14 0.5 0.34 1.1 1 +11 1 +11 Minimum gain for stability (CLoad = 100 pF) Part # TSV620-1 TSV6290-1 TSV630-1 TSV6390-1 3.7 PCB layouts For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply pins. 3.8 Macromodel An accurate macromodel of the TSV6290 and TSV6291 is available on STMicroelectronics’ web site at www.st.com. This model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV629x operational amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. It helps to validate a design approach and to select the right operational amplifier, but it does not replace on-board measurements. 14/23 Doc ID 17117 Rev 1 TSV6290, TSV6290A, TSV6291, TSV6291A Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Doc ID 17117 Rev 1 15/23 Package information TSV6290, TSV6290A, TSV6291, TSV6291A 4.1 SOT23-5 package mechanical data Figure 23. SOT23-5L package mechanical drawing Table 9. SOT23-5L package mechanical data Dimensions Ref. Min. A A1 A2 B C D D1 e E F L K 2.60 1.50 0.10 0° 0.90 0.35 0.09 2.80 0.90 Millimeters Typ. 1.20 Max. 1.45 0.15 1.05 0.40 0.15 2.90 1.90 0.95 2.80 1.60 0.35 3.00 1.75 0.60 10° 0.102 0.059 0.004 1.30 0.50 0.20 3.00 0.035 0.013 0.003 0.110 Min. 0.035 Inches Typ. 0.047 Max. 0.057 0.006 0.041 0.015 0.006 0.114 0.075 0.037 0.110 0.063 0.013 0.118 0.069 0.023 0.051 0.019 0.008 0.118 16/23 Doc ID 17117 Rev 1 TSV6290, TSV6290A, TSV6291, TSV6291A Package information 4.2 SOT23-6 package mechanical data Figure 24. SOT23-6L package mechanical drawing Table 10. SOT23-6L package mechanical data Dimensions Ref. Min. A A1 A2 b c D E e H L ° 2.60 0.10 0 0.90 0.35 0.09 2.80 1.50 0.90 Millimeters Typ. Max. 1.45 0.10 1.30 0.50 0.20 3.05 1.75 0.95 3.00 0.60 10° 0.102 0.004 0.035 0.013 0.003 0.110 0.060 Min. 0.035 Inches Typ. Max. 0.057 0.004 0.051 0.019 0.008 0.120 0.069 0.037 0.118 0.024 Doc ID 17117 Rev 1 17/23 Package information TSV6290, TSV6290A, TSV6291, TSV6291A 4.3 SC70-5 (or SOT323-5) package mechanical data Figure 25. SC70-5 (or SOT323-5) package mechanical drawing SIDE VIEW DIMENSIONS IN MM GAUGE PLANE COPLANAR LEADS SEATING PLANE TOP VIEW Table 11. SC70-5 (or SOT323-5) package mechanical data Dimensions Ref Min A A1 A2 b c D E E1 e e1 L < 0.26 0° 0.80 0.15 0.10 1.80 1.80 1.15 0.80 Millimeters Typ Max 1.10 0.10 0.90 1.00 0.30 0.22 2.00 2.10 1.25 0.65 1.30 0.36 0.46 8° 0.010 2.20 2.40 1.35 0.315 0.006 0.004 0.071 0.071 0.045 Min 0.315 Inches Typ Max 0.043 0.004 0.035 0.039 0.012 0.009 0.079 0.083 0.049 0.025 0.051 0.014 0.018 0.087 0.094 0.053 18/23 Doc ID 17117 Rev 1 TSV6290, TSV6290A, TSV6291, TSV6291A Package information 4.4 SC70-6 (or SOT323-6) package mechanical data Figure 26. SC70-6 (or SOT323-6) package mechanical drawing Table 12. SC70-6 (or SOT323-6) package mechanical data Dimensions Ref Min. A A1 A2 b c D E e HE L Q1 1.80 0.10 0.10 0.80 0.15 0.10 1.80 1.15 0.80 Millimeters Typ. Max. 1.10 0.10 1.00 0.30 0.18 2.20 1.35 0.65 2.40 0.40 0.40 0.071 0.004 0.004 0.031 0.006 0.004 0.071 0.045 Min. 0.031 Inches Typ. Max. 0.043 0.004 0.039 0.012 0.007 0.086 0.053 0.026 0.094 0.016 0.016 Doc ID 17117 Rev 1 19/23 Package information TSV6290, TSV6290A, TSV6291, TSV6291A Figure 27. SC70-6 (or SOT323-6) package footprint 20/23 Doc ID 17117 Rev 1 TSV6290, TSV6290A, TSV6291, TSV6291A Ordering information 5 Ordering information Table 13. Order codes Temperature range Package SOT23-6 SC70-6 SOT23-6 SC70-6 -40°C to +125°C TSV6291ILT TSV6291ICT TSV6291AILT TSV6291AICT SOT23-5 SC70-5 SOT23-5 SC70-5 Tape & reel K107 K14 K113 K15 Packing Marking K106 K16 K139 K39 Part number TSV6290ILT TSV6290ICT TSV6290AILT TSV6290AICT Doc ID 17117 Rev 1 21/23 Revision history TSV6290, TSV6290A, TSV6291, TSV6291A 6 Revision history Table 14. Date 04-Mar-2010 Document revision history Revision 1 Initial release. Changes 22/23 Doc ID 17117 Rev 1 TSV6290, TSV6290A, TSV6291, TSV6291A Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 17117 Rev 1 23/23