VN330SP-E
Datasheet
Quad high-side smart power solid-state relay
Features
•
•
•
•
•
•
•
•
Product status link
VN330SP-E
Product label
Output current: 0.7 A per channel
Digital input clamped at 32 V minimum voltage
Shorted load and overtemperature protections
Built-in current limiter
Undervoltage shutdown
Open drain diagnostic output
Fast demagnetization of inductive loads
Conforms to IEC 61131-2
Applications
•
•
•
Programmable logic control
Industrial PC peripheral input/output
Numerical control machines
Description
The VN330SP-E is a monolithic device developed using VIPower technology,
intended to drive four independent resistive or inductive loads with one side
connected to ground. Active current limitation prevents dropping of the system
power supply in case of shorted load. Built-in thermal shutdown protects the chip
from overtemperature and short-circuit. The open drain diagnostic output indicates
overtemperature conditions.
DS4361 - Rev 5 - May 2022
For further information contact your local STMicroelectronics sales office.
www.st.com
VN330SP-E
Block diagram
1
Block diagram
Figure 1. Block diagram
DS4361 - Rev 5
page 2/21
VN330SP-E
Pin connection
2
Pin connection
Figure 2. Connection diagram (top view)
DS4361 - Rev 5
page 3/21
VN330SP-E
Pin connection
Figure 3. Current and voltage conventions
DS4361 - Rev 5
page 4/21
VN330SP-E
Maximum ratings
3
Maximum ratings
Table 1. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VCC
Power supply voltage
45
V
-VCC
Reverse supply voltage
-0.3
V
IOUT
Output current
Internally limited
A
IR
Reverse output current (per channel)
-6
A
IIN
Input current range
±10
mA
IDIAG
DIAG pin current
±10
mA
VESD
Electrostatic discharge (R = 1.5 kΩ; C = 100 pF)
2000
V
4
J
EAS
Single pulse avalanche energy, all channels active simultaneously,
Tamb = 125 °C, ILOAD = 0.625 A
PTOT
Power dissipation at TC = 25 °C
Internally limited
W
TJ
Junction operating temperature
Internally limited
°C
TSTG
Storage temperature
-55 to 150
°C
Table 2. Thermal data
Symbol
Rth(JC)
Rth(JA)
Parameter
Thermal resistance junction-case
(1)
Thermal resistance junction-ambient (2)
Value
Unit
Max.
2
°C/W
Max.
50
°C/W
1. Per channel.
2. When mounted on a four-layer FR-4, with the minimum recommended pad size.
DS4361 - Rev 5
page 5/21
VN330SP-E
Electrical characteristics
4
Electrical characteristics
10 V < VCC < 36 V; -40 °C < TJ < 125 °C; unless otherwise specified
Table 3. Power section
Symbol
VCC
RDS(on)
IS
Vdemag
Parameter
Test conditions
Supply voltage
On-state resistance
Min.
Typ.
10
Max.
Unit
36
V
IOUT = 0.5 A at TJ = 25 °C
0.2
IOUT = 0.5 A at TJ = 85 °C
0.32
IOUT = 0.5 A at TJ = 125 °C
0.44
Ω
All channels OFF
1
mA
Supply current
On-state
VIN = 5 V, IOUT = 0 V, TJ = -40 °C
15
mA
Output voltage at turn-off
IOUT = 0.5 A; LLOAD ≥ 1 mH
VCC-45
V
VCC-65
VCC-55
Table 4. Switching (VCC = 24 V, RLOAD = 48Ω, see Figure 8. Switching parameter test conditions)
Symbol
Parameter
td(ON)
Turn-on delay time of output
current
tr
td(OFF)
tf
DS4361 - Rev 5
Rise time of output current
Turn-off delay time of output
current
Fall time of output current
(di/dt)on
Turn-on current slope
(di/dt)off
Turn-off current slope
Test conditions
Input rise time < 0.1 µs, TJ = 25 °C
Min.
Typ.
Max.
30
40
Input rise time < 0.1 µs, TJ = 125 °C
Input rise time < 0.1 µs, TJ = 25 °C
60
50
Input rise time < 0.1 µs, TJ = 125 °C
Input rise time < 0.1 µs, TJ = 25 °C
115
20
Input rise time < 0.1 µs, TJ = 125 °C
Input rise time < 0.1 µs, TJ = 25 °C
100
30
40
8
15
Input rise time < 0.1 µs, TJ = 125 °C
20
Normal operation
0.5
IOUT = ILIM, TJ = 25 °C
2
Normal operation
2
IOUT = ILIM, TJ = 25 °C
4
Unit
µs
µs
µs
µs
A/µs
A/µs
page 6/21
VN330SP-E
Electrical characteristics
Table 5. Logic inputs
Symbol
Parameter
VIL
Input low level voltage
VIH
Input high level voltage
VI(HYST)
Input hysteresis voltage
IIN
Test conditions
Min.
Typ.
Max.
Unit
2
V
3.5
V
0.5
Input current
VIN = 0 to 30 V
ILGND
Output current in ground
disconnection
VCC= VINn = VGND = VDIAG = 24 V;
VICL
Input clamp voltage(1)
TJ = 25 °C
IIN = 1 mA
32
IIN = -1 mA
V
600
µA
25
mA
36
V
-0.7
1. The input voltage is internally clamped at 32 V minimum, the input pins can be connected to a higher voltage by an external
resistor, which cannot exceed 10 mA
Table 6. Protection and diagnostic
Symbol
Parameter
VDIAG (1)
Status voltage output low
VSCL (1)
Status clamp voltage
Test conditions
Min.
Typ.
IDIAG = 5 mA (fault condition)
IDIAG = 1 mA
Undervoltage shutdown
VOL
Low state output voltage
VIN = VIL; RLOAD ≥ 10 mΩ
ILIM
DC short-circuit current
VCC = 24 V; RLOAD < 10 mΩ
Unit
1
32
IDIAG = -1 mA
VUSD
Max.
V
36
-0.7
5
0.7
VCC = 24 V; VIN = 30 V;
8
V
1.5
V
2.5
A
4
A
IOVPK
Peak short-circuit current
IDIAGH
Leakage on DIAG pin in high
state
VDIAG = 24 V
100
μA
ILOAD
Output leakage current
VCC = 10 to 36 V; VIN=VIL
50
μA
100
μs
tSC
TTSD
TR
RLOAD < 10 mΩ
Delay time of current limiter
Thermal shutdown
temperature
150
170
°C
Thermal reset temperature
135
155
°C
1. Status determination > 100 μs after the switching edge.
Note:
DS4361 - Rev 5
If the INPUT pin is left floating, the corresponding channel automatically switches off. If GND pin is
disconnected, the channel switches off provided that VCC does not exceed 36 V.
page 7/21
VN330SP-E
Test circuits
5
Test circuits
Figure 4. Avalanche energy test circuit
Figure 5. Peak short-circuit test diagram
DS4361 - Rev 5
page 8/21
VN330SP-E
Switching time waveforms and truth table
6
Switching time waveforms and truth table
Table 7. Truth table
Conditions
Normal operation
Overtemperature
Undervoltage
Shorted load (current limitation)
INPUTn
OUTPUTn
Diagnostic
L
L
H
H
H
H
L
L
H
H
L
L
L
L
H (1)
H
L
H (1)
L
L
H
H
H (2)
H
1. DIAG pin is considered pulled-up at application voltage level
2. VOUT = RLOAD x ILIM
Figure 6. Switching waveforms
DS4361 - Rev 5
page 9/21
VN330SP-E
Switching time waveforms and truth table
Figure 7. Switching parameter test conditions
Figure 8. Driving circuit
DS4361 - Rev 5
page 10/21
VN330SP-E
Package information
7
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages,
depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product
status are available at: www.st.com. ECOPACK is an ST trademark.
7.1
PowerSO-10 package information
Figure 9. PowerSO-10 package outline
DS4361 - Rev 5
page 11/21
VN330SP-E
PowerSO-10 package information
Table 8. PowerSO-10 package mechanical data
Dim.
mm
Min.
Typ.
Max.
A1
0
0.05
0.1
A2
3.4
3.5
3.6
A3
1.2
1.3
1.4
A4
0.15
0.2
0.25
a
0.2
b
0.37
0.45
0.53
c
0.23
0.27
0.32
D
9.4
9.5
9.6
D1
7.4
7.5
7.6
d
0
0.05
0.1
E
13.85
14.1
14.35
E1(1)
9.3
9.4
9.5
E2
7.3
7.4
7.5
E3
5.9
6.1
6.3
e
1.27
e1
5.08
F
0.5
G
1.2
L
0.8
1
R1
0.25
R2
T
1.1
0.8
2 deg
5 deg
T1
6 deg
T2
10 deg
8 deg
1. Resin protrusions are not included (max. value 0.15 mm per side)
DS4361 - Rev 5
page 12/21
VN330SP-E
PowerSO-10 packing information
7.2
PowerSO-10 packing information
Figure 10. PowerSO-10 career tape outline
Note:
Drawing is not in scale
Table 9. PowerSO-10 career tape dimension mechanical data
Dim.
Note:
DS4361 - Rev 5
mm
Min.
Typ.
Max.
A0
14.9
15.0
15.1
B0
9.9
10.0
10.1
K0
4.15
4.25
4.35
F
11.4
11.5
11.6
E
1.65
1.75
1.85
W
23.7
24.0
24.3
P2
1.9
2.0
2.1
P0
3.9
4.0
4.1
P1
23.9
24.0
24.1
T
0.025
0.30
0.35
D(Ø)
1.50
1.55
1.60
10 sprocket hole pitch cumulative tolerance ±0.2 mm
page 13/21
VN330SP-E
PowerSO-10 packing information
Figure 11. PowerSO-10 reel outline
Note:
Drawing is not in scale
Table 10. PowerSO-10 reel dimension mechanical data
mm
Dim.
Min.
Typ.
Max.
A
330
B
1.5
C
12.8
D
20.2
N
60
G
23.7
13
13.2
24.4
T
30.4
Table 11. PowerSO-10 base and bulk quantity in tape and reel
DS4361 - Rev 5
Base quantity
Bulk quantity
600
600
page 14/21
VN330SP-E
PowerSO-10 packing information
Figure 12. PowerSO-10 suggested pad and tube shipment (no suffix)
Note:
DS4361 - Rev 5
10 sprocket hole pitch cumulative tolerance ±0.2 mm
page 15/21
VN330SP-E
Ordering information
8
Ordering information
Table 12. Ordering information
Part number
VN330SP-E
VN330SPTR-E
DS4361 - Rev 5
Package
PowerSO-10
Packaging
Tube
Tape and reel
page 16/21
VN330SP-E
Revision history
Table 13. Document revision history
Date
DS4361 - Rev 5
Revision
Changes
06-Sep-2005
1
Initial release.
31-Oct-2006
2
Typo in electrical characteristics temperature conditions updated on
page 5
27-Mar-2007
3
Document reformatted, typo in Note 1 on page 6
14-Feb-2017
4
Updated Table 3. Power section. Inserted Figure 13. PowerSO-10
suggested pad and tube shipment (no suffix)
03-May-2022
5
Document reformatted; updated description and value of EAS in table
1; changed fig.4; some minor typo corrected
page 17/21
VN330SP-E
Contents
Contents
1
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
Pin connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
4
Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6
Switching time waveforms and truth table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7
Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
8
7.1
PowerSO-10 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.2
PowerSO-10 packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
List of tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
List of figures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
DS4361 - Rev 5
page 18/21
VN330SP-E
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching (VCC = 24 V, RLOAD = 48Ω, see Figure 8. Switching parameter test conditions)
Logic inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protection and diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PowerSO-10 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PowerSO-10 career tape dimension mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PowerSO-10 reel dimension mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PowerSO-10 base and bulk quantity in tape and reel . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DS4361 - Rev 5
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 5
. 5
. 6
. 6
. 7
. 7
. 9
12
13
14
14
16
17
page 19/21
VN330SP-E
List of figures
List of figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 11.
Figure 12.
DS4361 - Rev 5
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connection diagram (top view) . . . . . . . . . . . . . . . . . . . .
Current and voltage conventions. . . . . . . . . . . . . . . . . . .
Avalanche energy test circuit . . . . . . . . . . . . . . . . . . . . .
Peak short-circuit test diagram . . . . . . . . . . . . . . . . . . . .
Switching waveforms. . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching parameter test conditions . . . . . . . . . . . . . . . .
Driving circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PowerSO-10 package outline . . . . . . . . . . . . . . . . . . . . .
PowerSO-10 career tape outline . . . . . . . . . . . . . . . . . . .
PowerSO-10 reel outline . . . . . . . . . . . . . . . . . . . . . . . .
PowerSO-10 suggested pad and tube shipment (no suffix) .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 2
. 3
. 4
. 8
. 8
. 9
10
10
11
13
14
15
page 20/21
VN330SP-E
IMPORTANT NOTICE – READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names
are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2022 STMicroelectronics – All rights reserved
DS4361 - Rev 5
page 21/21
很抱歉,暂时无法提供与“VN330SP-E”相匹配的价格&库存,您可以联系我们找货
免费人工找货