T R A N S F O R M E R S
Step-up transformers
Wound SMD
ATB series
RoHS
REACH
SVHC-Free
Cl
Br
Pb
Halogen
Free
Lead
Free
ATB3225 type
FEATURES
Compact step-up transformer developed for Xenon circuits.
ATB3225 is smaller than conventional step-up transformers, which makes it possible to minimize the mounting area.
Auto winding allows for stable winding so that stable charging characteristics can be acquired.
Automated processing results in highly reliable products.
Operating temperature range: –40 to +85°C (including self-temperature rise)
APPLICATION
Xenon Flash, HAPTICS
PART NUMBER CONSTRUCTION
ATB
322515
Series name
L×W×T dimensions
3.2×2.5×1.5 mm
3.2×2.5×2.4 mm
-
0110
-
Turn ratio
T
000
Packaging style
Internal code
CHARACTERISTICS SPECIFICATION TABLE
Turn ratio
1:10
1:10.2
Inductance
(µH)[at100kHz]
7.0±20%
7.0±20%
DC resistance ( )
Primary
Secondary
0.5max.
60max.
0.5max.
60max.
Leakage inductance
(µH)[at100kHz]
0.4max.
0.4max.
Withstanding
voltage
500V rms
500V rms
Rated current
Part No.
0.6A rms
0.7A rms
ATB322515-0110-T000
ATB322524-0110-T000
Measurement equipment
Measurement item
Product No.
Inductance
4284A
DC resistance
4338A
Leakage inductance
4284A
Withstanding voltage
4339A
* Equivalent measurement equipment may be used.
Manufacturer
Keysight Technologies
Keysight Technologies
Keysight Technologies
Keysight Technologies
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/5)
20190221
trans_atb3225_en.fm
T R A N S F O R M E R S
ATB3225 type
INDUCTANCE VS. DC BIAS CHARACTERISTICS
10
9
Inductance primary (μH)
8
7
6
ATB322524
5
4
ATB322515
3
2
1
0
0
100
200
300
400
500
600
700
800
900
DC current (mA)
1000
1100
1200
1300
1400
1500
Measurement equipment
Product No.
Manufacturer
4284A
Keysight Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/5)
20190221
trans_atb3225_en.fm
T R A N S F O R M E R S
ATB3225 type
SHAPE & DIMENSIONS
ATB322515
ATB322524
3.2±0.2
3.2±0.2
3
2
3
2.5±0.2
2.5±0.2
2
1
4
1
3.2±0.3
4
2.4max.
1.55max.
3.2±0.3
0.50
2.5±0.3
1.37
1.37
2.5±0.3
0.45
0.45
0.50
Dimensions in mm
2.32
1.22
RECOMMENDED LAND PATTERN
2.0
4.0
Dimensions in mm
CIRCUIT DIAGRAM
2
3
1
4
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
245°C
Temperature
230°C
230°C
180°C
10s max.
150°C
60 to 120s
10 to 30s
Time
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/5)
20190221
trans_atb3225_en.fm
T R A N S F O R M E R S
ATB3225 type
PACKAGING STYLE
REEL DIMENSIONS
2 typ.
60 +1
–0
2.3±0.5
9 +1
–0
ø13.2±0.2
ø21.0±0.8
13±1
ø180 +0
–1.5
Dimensions in mm
2.0±0.05
4.0±0.1
B
A
K
3.5±0.05
1.5 +0.1
0
8.0±0.2
Sprocket
hole
t
1.75±0.1
TAPE DIMENSIONS
4.0±0.1
Type
ATB322515
ATB322524
A
2.9±0.1
2.9±0.1
B
3.6±0.1
3.6±0.1
K
1.6±0.05
2.5±0.05
Cavity
Dimensions in mm
PACKAGE QUANTITY
Package quantity
1,000 pcs/reel
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
Operating
Storage
Individual
temperature range temperature range
weight
ATB322515
–40 to +85°C
–40 to +85°C
50 mg
ATB322524
–40 to +85°C
–40 to +85°C
80 mg
Operating temperature range includes self-temperature rise.
The storage temperature range is for after the assembly.
Type
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/5)
20190221
trans_atb3225_en.fm
T R A N S F O R M E R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is within 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(5/5)
20190221
trans_atb3225_en.fm
ATB322515-0110-T000 价格&库存
很抱歉,暂时无法提供与“ATB322515-0110-T000”相匹配的价格&库存,您可以联系我们找货
免费人工找货