DG9051, DG9052, DG9053
Vishay Siliconix
Precision 8-Ch/Dual 4-Ch/Triple 2-Ch
Low Voltage Analog Switches/Multiplexers
DESCRIPTION
FEATURES
The DG9051, DG9052, DG9053 are low-voltage monolithic
CMOS analog switches and multiplexers. DG9051 is an
8-channel multiplexer; DG9052 is a dual 4 channel
multiplexer; and DG9053 is a triple single-pole/double throw
(SPDT) switch.
They are designed to operate from a + 2.7 V to + 12 V single
supply or ± 2.7 V to ± 6 V dual power supplies. All control
logic inputs have guaranteed 2 V logic high/0.8 V logic low
when operating from a single 5 V or dual ± 5 V supplies, and
2.4 V logic high/0.8 V logic low when V + = 12 V.
Built on Vishay Siliconix’s proprietary high-density process,
the DG9051, DG9052, DG9053 offer the advantage of
bi-directional signal, rail to rail analog signal handling.
As a committed partner to the community and the
environment, Vishay Siliconix manufactures this product with
the Lead (Pb)-Free device terminations. For analog
switching products manufactured with 100 % matte tin device
termination, the Lead (Pb)-free “-E3”suffix is being used as a
de-signator.
• Halogen-free according to IEC 61249-2-21
Definition
• 2.7 V to 12 V single supply
or ± 2.7 V to ± 6 V dual aupply operation
• Guaranteed RON matching
• Low Voltage CMOS Logic Compatible
• Compliant to RoHS Directive 2002/95/EC
BENEFITS
• Wide operation voltage range
• Pin compatible with 74HC4051/2/5
• Guaranteed low leakage
APPLICATIONS
•
•
•
•
Battery powered equipment
Test process equipment
Communication systems
A/V and mixed signal routing
• Automotive
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG9051
X4
1
DG9053
DG9052
16
VCC
Y0
1
16
VCC
Y1
1
16
VCC
Y2
2
15
X2
Y0
2
15
Y
X6
2
15
X2
X
3
14
X1
Y
3
14
X1
Z1
3
14
X
X7
4
13
X0
Y3
4
13
X
Z
4
13
X1
X5
5
12
X3
Y1
5
12
X0
Z0
5
12
X0
Enable
6
11
A
Enable
6
11
X3
Enable
6
11
A
VEE
7
10
B
VEE
7
10
A
VEE
7
10
B
9
C
GND
8
9
B
GND
8
9
C
GND
Logic
8
Logic
ORDERING INFORMATION
Temp. Range
Package
- 40 °C to 85°C
TSSOP-16
Part Number
DG9051DQ-T1-E3
DG9052DQ-T1-E3
DG9053DQ-T1-E3
The information shown here is a preliminary product proposal, not a commercial product data sheet. Siliconix is not committed to produce this or
any similiar product. This information should not be used for design purposes, nor construed as an offer to furnish or sell such products.
Document Number: 73410
S11-1066-Rev. B, 30-May-11
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9051, DG9052, DG9053
Vishay Siliconix
TRUTH TABLE
Select Inputs
On Switches
Enable
Input
C*
B
A
DG9051
DG9052
DG9053
H
X
X
X
All switches open
All switches open
All switches open
L
L
L
L
X - X0
X - X0,
Y - Y0
X - X0,
Y - Y0,
Z - Z0
L
L
L
H
X - X1
X - X1,
Y - Y1
X - X1,
Y - Y0,
Z - Z0
L
L
H
L
X - X2
X - X2,
Y - Y2
X - X0,
Y - Y1,
Z - Z0
L
L
H
H
X - X3
X - X3,
Y - Y3
X - X1,
Y - Y1,
Z - Z0
L
H
L
L
X - X4
X - X0,
Y - Y0
X - X0,
Y - Y0,
Z - Z1
L
H
L
H
X - X5
X - X1,
Y - Y1
X - X1,
Y - Y0,
Z - Z1
L
H
H
L
X - X6
X - X2,
Y - Y2
X - X0,
Y - Y1,
Z - Z1
L
H
H
H
X - X7
X - X3,
Y - Y3
X - X1,
Y - Y1,
Z - Z1
X = Don’t care
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
Parameter
Limit
V+
Voltage Referenced to VDigital Inputsa
GND
7
VS, VD
(V -) - 0.3 to (V +) + 0.3
Current (Any Terminal Except S or D)
30
Continuous Current, S or D
100
Peak Current, S or D (Pulsed at 1 ms, 10 % Duty Cycle Max.)
200
Package Solder Reflow Conditionsb
IR/Convection
Storage Temperature
Power Dissipation (Packages)c
www.vishay.com
2
Unit
13.5
260
- 65 to 150
TA = 70 °C, TSSOP-16d
925
V
mA
°C
mW
Document Number: 73410
S11-1066-Rev. B, 30-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9051, DG9052, DG9053
Vishay Siliconix
SPECIFICATIONS (Single Supply 12 V)
Parameter
Symbol
Test Condition
Unless Otherwise Specified
V + = 12 V, ± 10 %, V - = 0 V
Limits
- 40 °C to 85°C
VA, VEN = 0.8 V or 2.4 Vf
Temp.b
Min.c
Full
0
RON
VD = 3.5 V, IS = 1 mA
Sequence Each Switch On
Room
Full
RON
VD = 3.5 V, IS = 1 mA
Room
Typ.d
Max.c
Unit
12
V
40
50
Analog Switch
Analog Signal Rangee
On-Resistance
RON Match Between Channelsg
VANALOG
IS(off)
VEN = 2.4 V, VD = 11 V or 1 V, VS = 1 V or 11 V
Switch Off Leakage Current
ID(off)
Channel On Leakage Current
ID(on)
VEN = 0 V, VS = VD = 1 V or 11 V
30
5
Room
Full
-1
- 20
1
20
Room
Full
-1
- 20
1
20
Room
Full
-2
- 10
2
10
2.4
nA
Digital Control
Logic High Input Voltage
VINH
Full
Logic Low Input Voltage
VINL
Full
Input Current
IIN
VAX = VEN = 2.4 V or 0.8 V
Full
tTRANS
VNO/VNC = 8 V/0 V, 0 V/8 V
RL = 300 , CL = 35 pF
Room
Full
0.8
-1
1
V
µA
Dynamic Characteristics
Transition Time
Break-Before-Make Time
Enable Turn-On Time
tON(EN)
Enable Turn-Off Time
tOFF(EN)
Charge Injectione
Off-Isolation
Q
e,h
OIRR
e
XTALK
Crosstalk
Source Off Capacitancee
Drain Off
Room
Full
tBBM
VX,Y, Z = 5 V, VS = 0 V,
RL = 306 , CL = 35 pF
CL = 1 nF, VGEN = 0 V, RGEN = 0
f = 1 MHz, RL = 50
26
3
10
ns
Room
Full
20
35
45
Room
Full
16
30
40
Room
38
Room
- 78
Room
- 83
CS(off)
f = 1 MHz, VS = 0 V, VEN = 2.4 V
Room
4
Capacitancee
CD(off)
f = 1 MHz, VD = 0 V, VEN = 2.4 V
Room
8
e
CD(on)
f = 1 MHz, VD = 0 V, VEN = 0 V
Room
15
I+
VEN = VA = 0 V or V+
Room
Drain On Capacitance
35
55
pC
dB
pF
Power Supply
Power Supply Current
Document Number: 73410
S11-1066-Rev. B, 30-May-11
1
µA
www.vishay.com
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9051, DG9052, DG9053
Vishay Siliconix
SPECIFICATIONS (Dual Supply V + = 5 V, V - = - 5 V)
Parameter
Symbol
Test Condition
Unless Otherwise Specified
V + = 5 V, V - = - 5 V ± 10 %
Limits
- 40 °C to 85°C
VA, VEN = 0.8 V or 2 Vf
Temp.b
Min.c
Full
-5
V + = 4.5 V, V - = - 4.5 V, VD = ± 3 V, IS = 1 mA
Sequence Each Switch On
Room
Full
Typ.d
Max.c
Unit
5
V
35
55
60
Analog Switch
Analog Signal Rangee
VANALOG
RON
On-Resistance
RON Match Between Channelsg
RON
RON
Flatness
On-Resistance Flatnessi
IS(off)
Switch Off Leakage Current
a
ID(off)
Channel On Leakage Currenta
ID(on)
Room
V + = 4.5 V, V - = - 4.5 V, VD = ± 3 V, IS = 1 mA
V + = 5.5 V, V - = - 5.5 V
VEN = 2 V, VD = ± 4 .5 V, VS = ± 4.5 V
V + = 5.5 V, V - = - 5.5 V
VEN = 0 V, VD = ± 4.5 V, VS = ± 4.5 V
5
Room
7
10
Room
Full
-1
- 20
1
20
Room
Full
-1
- 20
1
20
Room
Full
-2
- 10
2
10
2
nA
Digital Control
Logic High Input Voltage
VINH
Full
Logic Low Input Voltage
VINL
Full
Input Currenta
IIN
VAX = VEN = 2 V or 0.8 V
Full
tTRANS
V + = 4.5 V, V - = - 4.5 V VNO/NC = ± 3 V,
RL = 300 , CL = 35 pF
Room
Full
0.8
-1
1
V
µA
Dynamic Characteristics
Transition Timee
Break-Before-Make Timee
Room
Full
tBBM
Enable Turn-On Timee
tON(EN)
Enable Turn-Off Timee
tOFF(EN)
VX,Y, Z = +/- 3 V, VS = 0 V,
RL = 300 , CL = 35 pF
35
5
12
ns
Room
Full
38
55
70
Room
Full
22
35
50
Source Off Capacitancee
CS(off)
f = 1 MHz, VS = 0 V, VEN = 2 V
Room
5
Drain Off Capacitancee
CD(off)
f = 1 MHz, VD = 0 V, VEN = 2 V
Room
9
e
CD(on)
f = 1 MHz, VD = 0 V, VEN = 0 V
Room
13
Drain On Capacitance
50
65
pF
Power Supply
Power Supply Current
www.vishay.com
4
I+
I-
VEN = VA = 0 V or V +
Room
Room
1
-1
µA
Document Number: 73410
S11-1066-Rev. B, 30-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9051, DG9052, DG9053
Vishay Siliconix
SPECIFICATIONS (Single Supply 5 V)
Parameter
Symbol
Test Condition
Unless Otherwise Specified
V + = 5 V, ± 10 %, V - = 0 V
Limits
- 40 °C to 85°C
VA, VEN = 0.8 V or 2 Vf
Temp.b
Min.c
VANALOG
Full
0
RON
V + = 4.5 V, VD or VS = 3 V or 3.5 V, IS = 1 mA
Room
Full
RON
V + = 4.5 V, VD = 3 V, IS = 1 mA
Room
Typ.d
Max.c
Unit
5
V
80
100
120
Analog Switch
Analog Signal Rangee
On-Resistance
RON Match Between Channelsg
IS(off)
Switch Off Leakage Currenta
ID(off)
Channel On Leakage Currenta
ID(on)
V + = 5.5 V, VEN = 2 V
VS = 1 V or 4.5 V, VD = 4.5 V or 1 V
V + = 5.5 V, VEN = 0 V
VD = VS = 1 V or 4.5 V
8
Room
Full
-1
- 20
1
20
Room
Full
-1
- 20
1
20
Room
Full
-2
- 10
2
10
2
nA
Digital Control
Logic High Input Voltage
VINH
Full
Logic Low Input Voltage
VINL
Full
Input Currenta
0.8
IIN
VAX = VEN = 2 V or 0.8 V
Full
tTRANS
V + = 4.5 V, V - = 0 V, VNO / NC = 3 V / 0 V,
0 V / 3 V, RL = 300 , CL = 35 pF
Room
40
-1
1
V
µA
Dynamic Characteristics
Transition Time
Break-Before-Make Time
tBBM
Enable Turn-On Time
tON(EN)
Enable Turn-Off Time
tOFF(EN)
Charge Injection
Off-Isolation
e
e,h
e
Crosstalk
Source Off Capacitancee
Q
OIRR
XTALK
V + = 4.5 V, VX,Y, Z = 3 V, VS = 0 V,
RL = 300 , CL = 35 pF
Room
15
Room
40
Room
20
CL = 1 nF, VGEN = 0 V, RGEN = 0
Room
20
Room
- 79
Room
- 83
4
f = 1 MHz, RL = 50
CS(off)
f = 1 MHz, VS = 0 V, VEN = 0 V
Room
Capacitancee
CD(off)
f = 1 MHz, VD = 0 V, VEN = 2 V
Room
8
Drain On Capacitancee
CD(on)
f = 1 MHz, VD = 0 V, VEN = 0 V
Room
15
I+
VEN = VA = 0 V or V +
Room
Drain Off
ns
pC
dB
pF
Power Supply
Power Supply Current
Document Number: 73410
S11-1066-Rev. B, 30-May-11
1
µA
www.vishay.com
5
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9051, DG9052, DG9053
Vishay Siliconix
SPECIFICATIONS (Single Supply 3 V)
Parameter
Symbol
Test Condition
Unless Otherwise Specified
V + = 3 V, ± 10 %, V - = 0 V
VEN = 0.4 V or 2 V
Limits
- 40 °C to 85°C
Temp.b
Min.c
Full
0
Typ.d
Max.c
Unit
3
V
Analog Switch
Analog Signal Rangee
VANALOG
On-Resistance
RON Match Between Channelsg
RON
V + = 2.7 V, VD = 1.5 V, IS = 0.1 mA
Room
RON
V + = 2.7 V, VD = 1.5 V, IS = 0.1 mA
Room
IS(off)
Switch Off Leakage Current
a
ID(off)
Channel On Leakage Currenta
ID(on)
V + = 3.3 V, VEN = 2 V
VS = 3 or 0.3 V, VD = 0.3 or 3 V
V + = 3.3 V, VEN = 0 V
VS = 3 or 0.3 V, VD = 0.3 or 3 V
130
12
Room
Full
-1
- 20
1
20
Room
Full
-1
- 20
1
20
Room
Full
-2
- 10
2
10
2
nA
Digital Control
Logic High Input Voltage
VINH
Full
Logic Low Input Voltage
VINL
Full
Input Currenta
IIN
VAX = VEN = 2 V or 0.4 V
Full
tTRANS
V + = 2.7 V, VNO/NC = 1.5 V/0 V, 0 V/1.5 V
RL = 300 , CL = 35 pF
Room
0.4
-1
1
V
µA
Dynamic Characteristics
Transition Time
Break-Before-Make Time
tBBM
Enable Turn-On Time
tON(EN)
Enable Turn-Off Time
tOFF(EN)
e
Charge Injection
e,h
Q
Off-Isolation
OIRR
Crosstalke
XTALK
Source Off Capacitancee
V + = 2.7 V, VX,Y, Z = 1.5 V, VS = 0 V,
RL = 300 , CL = 35 pF
CL = 1 nF, VGEN = 0 V, RGEN = 0
f = 1 MHz, RL = 50
Room
Full
80
25
ns
5
Room
90
Room
30
Room
9
Room
- 78
Room
- 83
CS(off)
f = 1 MHz, VS = 0 V, VEN = 1.8 V
Room
5
Drain Off
Capacitancee
CD(off)
f = 1 MHz, VD = 0 V, VEN = 1.8 V
Room
10
Drain On
Capacitancee
CD(on)
f = 1 MHz, VD = 0 V, VEN = 0 V
Room
15
I+
VEN = VA = 0 V or V +
Room
pC
dB
pF
Power Supply
Power Supply Current
1
µA
Notes:
a. Leakage parameters are guaranteed by worst case test condition and not subject to production test.
b. Room = 25°C, Full = as determined by the operating temperature suffix.
c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
d. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
e. Guaranteed by design, not subject to production test.
f. VIN = input voltage to perform proper function.
g. RDON = RDON Max - RDON Min.
h. Worst case isolation occurs on Channel 4 due to proximity to the drain pin.
i. RDON flatness is measured as the difference between the minimum and maximum measured values across a defined Analog signal.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
www.vishay.com
6
Document Number: 73410
S11-1066-Rev. B, 30-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9051, DG9052, DG9053
Vishay Siliconix
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
200
200
IS = 1 mA
T = 25 °C
IS = 1 mA
160
A = 85 °C
B = 25 °C
C = - 40 °C
V+ = 2.7 V
150
V+ = 2.7 V
A
120
B
100
C
80
A
R ON -
R ON -
V+ = 4.5 V
50
V+ = 12 V
C
V+ = 12 V
40
V+ = 4.5 V
B
A
B
C
0
0
0
4
8
VCOM - Analog Voltage (V)
0
12
2
4
6
8
10
12
VCOM - Analog Voltage (V)
RON vs. VCOM and Supply Voltage
RON vs. Analog Voltage and Temperature
80
A = 85 °C
B = 25 °C
C = - 40 °C
60
VEN = 0 V
10 000
B
Supply Current (pA)
A
C
R ON -
40
V+ = 12 V
100
V+ = 5 V
V- = - 5 V
20
1
- 40
0
-5
-3
-1
1
3
5
- 20
0
VCOM - Analog Voltage (V)
RON vs. Analog Voltage and Temperature
40
60
80
100
Supply Current vs. Temperature
40
80
VCC = ± 5 V
TA =V+
25=°C
5V
30
VCC = + 12 V
TA = 25 °C
60
20
40
Leakage Current (pA)
Leakage Current (pA)
20
Temperature (°C)
IS(off)
10
ID(off)
0
- 10
ID(on)
- 20
20
IS(off)
0
ID(on)
- 20
ID(off)
- 40
- 60
- 30
- 80
- 40
-5
-4
-3
-2
-1
0
1
2
3
4
5
0
2
4
6
8
12
10
VCOM, V NO, V NC - Analog Voltage (V)
VCOM, V NO, V NC - Analog Voltage (V)
Leakage Current vs. Analog Voltage
Leakage Current vs. Analog Voltage
Document Number: 73410
S11-1066-Rev. B, 30-May-11
www.vishay.com
7
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9051, DG9052, DG9053
Vishay Siliconix
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
3.0
10 000
2.5
VT - Switching Threshold (V)
Leakage Current (pA)
V+ = 5 V
V- = - 5 V
1000
INO(off), IINC(off)
ID(off)
100
ID(on)
10
2.0
1.5
1.0
0.5
IS(off)
1
- 40
0.0
- 20
0
20
40
60
80
0
100
2
4
6
8
10
12
14
V+ - Supply Voltage (V)
Temperature (°C)
Leakage Current vs. Temperature
Switching Threshold vs. Supply Voltage
0
50
Insertion Loss
40
30
Q - Charge Injection (pc)
Loss, OIRR, XTALK (dB)
- 20
- 40
- 60
OIRR
- 80
Crosstalk
V+ = 6 V
V- = - 6 V
RL
- 100
- 120
10K
20
10
0
V+ = 12 V
- 10
V+ = 2.7 V
- 20
V+ = 4.5 V
- 30
V+ = 6 V
- 40
- 50
100K
1M
10M
100M
1G
0
2
4
Frequency (Hz)
6
8
10
12
14
VCOM - Analog Voltage (V)
Insertion Loss, Off-Isolation
Crosstalk vs. Frequency
Charge Injection vs. Analog Voltage
10 m
V+ = 12 V
V- = 0 V
I+ - Supply Current (nA)
1m
100 µ
10 µ
1µ
100 n
10 n
1n
10
100
1K
10K
100K
1M
10M
Input Switching Frequency (Hz)
Supply Current vs. Input Switching Frequency
www.vishay.com
8
Document Number: 73410
S11-1066-Rev. B, 30-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9051, DG9052, DG9053
Vishay Siliconix
TEST CIRCUITS
V+
A2
S1
A1
50
Logic
Input
S2 - S 7
A0
DG9051
S8
VS8
VAX
GND
3V
50 %
0V
VO
D
EN
tr < 5 ns
tf < 5 ns
VS1
V-
VS1
35 pF
300
90 %
Switch
Output
V-
VO
50 %
V+
90 %
VS8
V+
A1
A0
tTRANS
VS1b
S1b
S1 ON
S1a - S 4a, Da
50
DG9052 S4b
EN
VS4b
VO
Db
GND
V-
S8 ON (DG9408)
or
S4 ON (DG9409)
tTRANS
Return to Specifications:
Single Supply 12 V
35 pF
300
Dual Supply V+ = 5 V, V- = - 5 V
Single Supply 5 V
V-
Single Supply 3 V
V+
Figure 1. Transition Time
V+
V+
S1
EN
VS1
S2 - S 8
A0
DG9051
A1
A2
GND
VO
D
V-
50
Logic
Input
50 %
0V
35 pF
300
tr < 5 ns
tf < 5 ns
3V
tOFF(EN)
V-
tON(EN)
0V
90 %
V+
Switch
Output
VO
V+
S1b
EN
A0
A1
GND
VS1
90 %
VO
S1a - S4a, Da
S2b - S4b
Return to Specifications:
Single Supply 12 V
DG9052
Db
V-
50
VO
Dual Supply V+ = 5 V, V- = - 5 V
Single Supply 5 V
300
35 pF
Single Supply 3 V
V-
Figure 2. Enable Switching Time
Document Number: 73410
S11-1066-Rev. B, 30-May-11
www.vishay.com
9
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9051, DG9052, DG9053
Vishay Siliconix
TEST CIRCUITS
V+
All S and Da
tr < 5 ns
tf < 5 ns
3V
Logic
Input
EN
50 %
VS1
0V
A0
A1
Db, D
A2
GND
VO
VS
V-
90 %
Switch
Output
50
V-
35 pF
300
VO
tOPEN
0V
Return to Specifications:
Single Supply 12 V
Dual Supply V+ = 5 V, V- = - 5 V
Single Supply 5 V
Single Supply 3 V
Figure 3. Break-Before-Make Interval
V+
Rg
V+
SX
Logic
Input
EN
Vg
OFF
ON
OFF
0V
A0
Channel
Select
3V
VO
D
A1
CL
1 nF
A2
GND
VO
Switch
Output
V-
VO is the measured voltage due to charge transfer
error Q, when the channel turns off.
V-
Q = CL x VO
Figure 4. Charge Injection
V+
V+
VIN
Rg = 50
V+
SX
VIN
RIN
50
S8
A0
D
Rg = 50
A2
V-
SX
S8
A0
VOUT
A1
GND
V+
S1
EN
D
A2
RL
50
GND
EN
VOff Isolation = 20 log
Crosstalk = 20 log
www.vishay.com
10
RL
50
VOUT
VIN
VIN
Figure 5. Off Isolation
V-
VVOUT
VOUT
A1
Figure 6. Crosstalk
Document Number: 73410
S11-1066-Rev. B, 30-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9051, DG9052, DG9053
Vishay Siliconix
TEST CIRCUITS
VIN
S1
V+
V+
V+
V+
Rg = 50
S1
Meter
A2
A0
D
VOUT
A1
Channel
Select
HP4192A
Impedance
Analyzer
or Equivalent
S8
A1
A0
A2
GND
EN
V-
RL
50
VInsertion Loss = 20 log
D
GND
VOUT
EN
f = 1 MHz
V-
V-
VIN
Figure 7. Insertion Loss
Figure 8. Source Drain Capacitance
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?73410.
Document Number: 73410
S11-1066-Rev. B, 30-May-11
www.vishay.com
11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
TSSOP: 16-LEAD
DIMENSIONS IN MILLIMETERS
Symbols
Min
Nom
Max
A
-
1.10
1.20
A1
0.05
0.10
0.15
A2
-
1.00
1.05
0.38
B
0.22
0.28
C
-
0.127
-
D
4.90
5.00
5.10
E
6.10
6.40
6.70
E1
4.30
4.40
4.50
e
-
0.65
-
L
0.50
0.60
0.70
L1
0.90
1.00
1.10
y
-
-
0.10
θ1
0°
3°
6°
ECN: S-61920-Rev. D, 23-Oct-06
DWG: 5624
Document Number: 74417
23-Oct-06
www.vishay.com
1
PAD Pattern
www.vishay.com
Vishay Siliconix
RECOMMENDED MINIMUM PAD FOR TSSOP-16
0.193
(4.90)
0.171
0.014
0.026
0.012
(0.35)
(0.65)
(0.30)
(4.35)
(7.15)
0.281
0.055
(1.40)
Recommended Minimum Pads
Dimensions in inches (mm)
Revision: 02-Sep-11
1
Document Number: 63550
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
工商网监
湘ICP备2023018690号
