ILD55-X009

IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors Optocoupler, Photodarlington Output, (Single, Dual, Quad Channel) FEATURES Single Channel A 1 6 B C 2 5 C NC 3 4 E • 125 mA load current rating • Fast rise time, 10 μs • • • • • Dual Channel Quad Channel SMD A 1 8 E C 2 7 C C 3 6 C A 4 5 E A 1 16 E C 15 C 2 C 3 14 C A 4 13 E A 5 12 E C 6 11 C C 7 10 C A 8 9 AGENCY APPROVALS • UL1577 • cUL • DIN EN 60747-5-5 (VDE 0884-5) DESCRIPTION The IL30 single, ILD55 dual, and ILQ30, ILQ31, ILQ55 quad are optically coupled isolators with gallium arsenide infrared emitters and silicon photodarlington sensors. Switching can be achieved while maintaining a high degree of isolation between driving and load circuits, with no crosstalk between channels. These optocouplers can be used to replace reed and mercury relays with advantages of long life, high speed switching and elimination of magnetic fields. The ILD55 is designed to reduce board space requirements in high density applications. E LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models Design Tools Fast fall time, 35 μs Single, dual, and quad channel Solid state reliability Standard DIP packages Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Related Documents ORDERING INFORMATION DIP I L x # # - X PART NUMBER 0 0 # PACKAGE OPTION T TAPE AND REEL 7.62 mm Option 7 Option 9 x = D (Dual) or Q (Quad) > 0.7 mm > 0.1 mm SINGLE CHANNEL DUAL CHANNEL UL, cUL, FIMKO ≥ 100 ≥ 100 ≥ 100 DIP-6 IL30 - - - DIP-8 - ILD55 - - SMD-8, option 7 - ILD55-X007 - - SMD-8, option 9 - ILD55-X009 - - DIP-16 - - ILQ30, ILQ55 ILQ31 SMD-16, option 9 - - ILQ55-X009T (1) - AGENCY CERTIFIED / PACKAGE QUAD CHANNEL CTR ≥ 200 Notes • Additional options may be possible, please contact sales office (1) Also available in tubes, do not put “T” on the end Rev. 2.0, 20-Sep-2021 Document Number: 83621 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Peak reverse voltage VRM 3 V IF 60 mA Forward continuous current Power dissipation Pdiss Derate linearly from 25 °C 100 mW 1.33 mW/°C OUTPUT Collector emitter breakdown voltage IL30 BVCEO 30 V ILQ30 BVCEO 30 V ILD55 BVCEO 55 V ILQ55 BVCEO 55 V IC 125 mA Pdiss 150 mW 2 mW/°C Collector (load) current Power dissipation Derate linearly from 25 °C COUPLER Total package power dissipation IL30 Ptot 250 mW ILD55 Ptot 400 mW ILQ30 Ptot 500 mW ILQ31 Ptot 500 mW ILQ55 Ptot 500 mW 3.3 mW/°C IL30 Derate linearly from 25 °C ILD55 3.3 mW/°C ILQ30 6.67 mW/°C ILQ31 6.67 mW/°C ILQ55 6.67 mW/°C Storage temperature Tstg -55 to +125 °C Operating temperature Tamb -55 to +100 °C 10 s Lead soldering time at 260 °C Note • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Forward voltage IF = 20 mA VF - 1.25 1.5 V Reverse current VR = 3 V IR - 0.1 10 μA Capacitance VR = 0 V CO - 25 INPUT pF OUTPUT Collector emitter breakdown voltage Collector emitter leakage current Collector emitter capacitance IC = 100 μA BVCEO 30 / 55 - - V VCE = 10 V, IF = 0 A ICEO - 1 100 nA VCE = 10 V, f = 1 MHz CCE - 3.4 - pF IC = 50 mA, IF = 50 mA VCEsat - 0.9 1 V CIO - 0.5 - pF COUPLER Collector emitter saturation voltage Capacitance (input to output) Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements Rev. 2.0, 20-Sep-2021 Document Number: 83621 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION IF = 10 mA, VCE = 5 V Current transfer ratio PART SYMBOL MIN. TYP. MAX. UNIT IL30 CTR 100 400 - % ILD55 CTR 100 400 - % ILQ30 CTR 100 400 - % ILQ55 CTR 100 400 - % ILQ31 CTR 200 400 - % SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Rise time VCC = 13.5 V, IF = 50 mA, RL = 100 Ω tr - 10 - μs Fall time VCC = 13.5 V, IF = 50 mA, RL = 100 Ω tf - 35 - μs SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification SYMBOL VALUE According to IEC 68 part 1 UNIT 55 / 100 / 21 Comparative tracking index CTI 175 VISO 4420 VRMS Maximum transient isolation voltage VIOTM 10 000 Vpeak Maximum repetitive peak isolation voltage VIORM 890 Vpeak VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 Ω VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω Output safety power PSO 400 mW Input safety current ISI 275 mA Safety temperature TS 175 °C ≥7 mm ≥7 mm ≥ 0.4 mm Maximum rated withstanding isolation voltage t = 1 min Isolation resistance Creepage distance Clearance distance Insulation thickness DTI Note • As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 NCTRce - Normalized CTRce VF - Forward Voltage (V) 1.4 1.3 Tamb = -55 °C 1.2 Tamb = 25 °C 1.1 1.0 0.9 Tamb = 85 °C 0.8 0.7 0.1 iil30_01 1 10 100 IF - Forward Current (mA) Fig. 1 - Forward Voltage vs. Forward Current Rev. 2.0, 20-Sep-2021 1.0 Normalized to: VCE = 5 V IF = 10 mA 0.8 0.6 VCE = 5 V 0.4 0.2 VCE = 1 V 0.0 0.1 iil30_02 1 10 100 1000 IF - LED Current (mA) Fig. 2 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current Document Number: 83621 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com 1 80 Normalized to: IF = 10 mA VCE = 5 V VCE = 5 V tpLH - Low/High Propagation Delay (µs) NIce - Normalized Ice 10 Vishay Semiconductors VCE = 1 V 0.1 0.01 0.001 0.1 60 100 Ω 10 15 20 IF - LED Current (mA) Fig. 6 - Low to High Propagation Delay vs. Collector Load Resistance and LED Current 20 Normalized to: Vcb = 3.5 V IF = 10 mA 0.1 0.01 0.001 0.1 5 0 tpHL - High/Low Propagation delay (µs) NIcb - Normalized (Icb) 470 Ω 20 iil30_06 10 VCC = 5 V Vth = 1.5 V 1 kΩ 15 10 100 Ω 5 0 1 10 100 Fig. 4 - Normalized Collector Base Photocurrent vs. LED Current 12 000 0 5 VCE = 5 V 10 15 20 IF - LED Current (mA) iil30_07 IF - LED Current (mA) iil30_04 220 Ω 40 100 10 1 Fig. 3 - Normalized Non-Saturated and Saturated Collector Emitter Current vs. LED Current 1 1 kΩ 0 IF - LED Current (mA) iil30_03 VCC = 5 V Vth = 1.5 V Fig. 7 - High to Low Propagation Delay vs. Collector Load Resistance and LED Current IF hFE - Current Gain 10 000 8000 VCE = 1 V 6000 VO tD tR t PLH 4000 2000 0 0.01 iil30_05 V TH = 1.5 V t PHL 0.1 1 10 Base Current Fig. 5 - hFE Current Gain vs. Base Current Rev. 2.0, 20-Sep-2021 tS tF 100 iil30_08 Fig. 8 - Switching Waveform Document Number: 83621 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors VCC = 13.5 V F = 10 kHz, DF = 50 % RL VO IF = 50 mA iil30_09 Fig. 9 - Switching Schematic PACKAGE DIMENSIONS in millimeters DIP-6 9.00 max. 8.60 ± 0.10 7.62 typ. 6.50 ± 0.25 0.50 ± 0.10 0.79 min. 2.54 typ. 1.27 ± 0.10 0.85 ± 0.10 6 5 4 1 2 3 3.10 ± 0.50 3.55 ± 0.25 0.90 min. 3° to 9° 0.25 ± 0.10 PIN ONE I.D. Rev. 2.0, 20-Sep-2021 Document Number: 83621 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors DIP-8 10.20 max. 9.75 ± 0.15 7.62 typ. 6.60 ± 0.25 0.50 min. 3.10 ± 0.50 3.55 ± 0.25 0.70 min. 1.27 ± 0.10 0.50 ± 0.10 .10 3° to 9° 0.25 ± 0 2.54 typ. 8 7 6 5 1 2 3 4 PIN ONE I.D. DIP-16 20.30 max. 7.62 typ. 19.90 ± 0.15 6.60 ± 0.25 0.50 min. 1.27 ± 0.10 0.50 ± 0.10 2.54 typ. 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 3.10 ± 0.50 3.55 ± 0.25 0.70 min. 3° to 9° .10 0.25 ± 0 PIN ONE I.D. Rev. 2.0, 20-Sep-2021 Document Number: 83621 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors SMD-6, Option 7 10.30 max. 7.62 typ. 9.00 max. 8.60 ± 0.10 6.50 ± 0.25 1.27 ± 0.10 0.25 ± 0.10 4.30 ± 0.30 0.70 min. 3.55 ± 0.25 0.90 min. 0.50 min. 2.54 typ. 5 Leads coplanarity 0.1 max. 4 0.76 6 8.00 min. 1.78 2.54 .25 R0 1.52 PIN ONE I.D. 8.00 min. 11.05 1 2 3 SMD-6, Option 9 10.05 max. 7.62 typ. 6.50 ± 0.25 9.00 max. 8.60 ± 0.10 3.55 ± 0.25 0.20 ± 0.10 0.25 ± 0.10 0.90 min. 0.50 min. 1.27 ± 0.10 8.00 min. Leads coplanarity 0.1 max. 2.54 typ. 5 4 .25 R0 1.78 2.54 0.76 6 1.52 PIN ONE I.D. 8.00 min. 11.05 1 Rev. 2.0, 20-Sep-2021 2 3 Document Number: 83621 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors SMD-8, Option 7 0.25 ± 0.10 0.50 min. 3.55 ± 0.25 0.70 min. 4.30 ± 0.30 10.30 max. 7.62 typ. 6.60 ± 0.25 10.20 max. 9.75 ± 0.15 1.27 ± 0.10 0.50 min. 2.54 typ. 7 6 Leads coplanarity 0.1 max. 5 0.76 8 8.00 min. .25 1.78 2.54 R0 1.52 8.00 min. PIN ONE I.D. 1 2 3 4 11.05 SMD-8, Option 9 10.05 max. 7.62 typ. 6.60 ± 0.25 10.20 max. 9.75 ± 0.15 1.27 ± 0.10 0.25 ± 0.10 3.55 ± 0.25 0.20 ± 0.10 0.70 min. 0.50 min. 8.00 min. 2.54 typ. 7 6 5 .25 R0 1.78 2.54 0.76 8 Leads coplanarity 0.1 max. 1.52 8.00 min. PIN ONE I.D. 1 Rev. 2.0, 20-Sep-2021 2 3 4 11.05 Document Number: 83621 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors SMD-16, Option 7 0.25 ± 0.10 3.55 ± 0.25 0.50 min. 19.90 ± 0.15 0.70 min. 4.30 ± 0.30 10.30 max. 7.62 typ. 6.60 ± 0.25 20.30 max. 1.27 ± 0.10 0.50 min. 2.54 typ. 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 0.76 16 Leads coplanarity 0.1 max. 8.00 min. .25 R0 1.78 2.54 PIN ONE I.D. 1.52 8.00 min. 11.05 Rev. 2.0, 20-Sep-2021 Document Number: 83621 9 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL30, ILD55, ILQ30, ILQ31, ILQ55 www.vishay.com Vishay Semiconductors SMD-16, Option 9 10.05 max. 7.62 typ. 6.60 ± 0.25 20.30 max. 19.90 ± 0.15 1.27 ± 0.10 0.25 ± 0.10 3.55 ± 0.25 0.20 ± 0.10 0.70 min. 0.50 min. Leads coplanarity 0.1 max. 8.00 min. 2.54 typ. 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 0.76 16 .25 R0 1.78 2.54 PIN ONE I.D. 1.52 8.00 min. 11.05 PACKAGE MARKING (example) ILD55 V YWW H 68 Notes • Only option 1 and 7 reflected in the package marking • The VDE logo is only marked on option 1 parts • Tape and reel suffix (T) is not part of the package marking Rev. 2.0, 20-Sep-2021 Document Number: 83621 10 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000