SiHB22N60EF
www.vishay.com
Vishay Siliconix
EF Series Power MOSFET With Fast Body Diode
FEATURES
D
• Low figure-of-merit (FOM) Ron x Qg
D2PAK (TO-263)
• Low input capacitance (Ciss)
• Reduced switching and conduction losses
• Ultra low gate charge (Qg)
G
• Avalanche energy rated (UIS)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
G D
S
S
N-Channel MOSFET
APPLICATIONS
•
•
•
•
Server and telecom power supplies
Switch mode power supplies (SMPS)
Power factor correction power supplies (PFC)
Lighting
- High-intensity discharge (HID)
- Fluorescent ballast lighting
• Industrial
- Welding
- Induction heating
- Motor drives
- Battery chargers
- Renewable energy
- Solar (PV inverters)
PRODUCT SUMMARY
VDS (V) at TJ max.
RDS(on) typ. () at 25 °C
650
VGS = 10 V
Qg max. (nC)
0.158
96
Qgs (nC)
9
Qgd (nC)
21
Configuration
Single
ORDERING INFORMATION
Package
D2PAK (TO-263)
Lead (Pb)-free and halogen-free
SiHB22N60EF-GE3
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
Drain-source voltage
VDS
600
Gate-source voltage
VGS
± 30
Continuous drain current (TJ = 150 °C)
VGS at 10 V
TC = 25 °C
TC = 100 °C
Pulsed drain current a
ID
UNIT
V
19
12
A
IDM
46
1.4
W/°C
Single pulse avalanche energy b
EAS
144
mJ
Maximum power dissipation
PD
179
W
TJ, Tstg
-55 to +150
°C
Linear derating factor
Operating junction and storage temperature range
Drain-source voltage slope
TJ = 125 °C
Reverse diode dv/dt d
Soldering recommendations (peak temperature) c
For 10 s
dv/dt
70
50
260
V/ns
°C
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature
b. VDD = 140 V, starting TJ = 25 °C, L = 28.2 mH, Rg = 25 , IAS = 3.2 A
c. 1.6 mm from case
d. ISD ID, di/dt = 400 A/μs, starting TJ = 25 °C
S19-0120-Rev. A, 04-Feb-2019
Document Number: 92245
1
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiHB22N60EF
www.vishay.com
Vishay Siliconix
THERMAL RESISTANCE RATINGS
PARAMETER
SYMBOL
TYP.
MAX.
Maximum junction-to-ambient
RthJA
-
62
Maximum junction-to-case (drain)
RthJC
-
0.7
UNIT
°C/W
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNIT
Static
Drain-source breakdown voltage
VDS temperature coefficient
Gate-source threshold voltage (N)
VDS
VGS = 0 V, ID = 250 μA
600
-
-
V
VDS/TJ
Reference to 25 °C, ID = 1 mA
-
0.68
-
V/°C
VGS(th)
VDS = VGS, ID = 250 μA
2.0
-
4.0
V
VGS = ± 20 V
-
-
± 100
nA
VGS = ± 30 V
-
-
±1
μA
VDS = 480 V, VGS = 0 V
-
-
1
VDS = 480 V, VGS = 0 V, TJ = 125 °C
-
-
500
Gate-source leakage
IGSS
Zero gate voltage drain current
IDSS
μA
-
0.158
0.182
gfs
VDS = 30 V, ID = 11 A
-
5.8
-
S
Input capacitance
Ciss
1423
-
Coss
-
73
-
Reverse transfer capacitance
Crss
VGS = 0 V,
VDS = 100 V,
f = 1 MHz
-
Output capacitance
-
5
-
Effective output capacitance, energy
related a
Co(er)
-
48
-
Effective output capacitance, time
related b
Co(tr)
-
240
-
Drain-source on-state resistance
Forward transconductance a
RDS(on)
VGS = 10 V
ID = 11 A
Dynamic
pF
VDS = 0 V to 480 V, VGS = 0 V
Total gate charge
Qg
Gate-source charge
Qgs
VGS = 10 V
ID = 11 A, VDS = 480 V
-
48
96
-
9
-
Gate-drain charge
Qgd
-
21
-
Turn-on delay time
td(on)
-
15
30
VDD = 480 V, ID = 11 A,
VGS = 10 V, Rg = 9.1
-
21
42
-
58
87
-
25
50
f = 1 MHz, open drain
0.3
0.6
1.2
-
-
19
-
-
46
Rise time
Turn-off delay time
tr
td(off)
Fall time
tf
Gate input resistance
Rg
nC
ns
Drain-Source Body Diode Characteristics
Continuous source-drain diode current
IS
Pulsed diode forward current
ISM
Diode forward voltage
VSD
Reverse recovery time
trr
Reverse recovery charge
Qrr
Reverse recovery current
IRRM
MOSFET symbol
showing the
integral reverse
p - n junction diode
D
A
G
TJ = 25 °C, IS = 11 A, VGS = 0 V
TJ = 25 °C, IF = IS = 11 A,
di/dt = 100 A/μs, VR = 400 V
S
-
-
1.2
V
-
113
226
ns
-
0.7
1.4
μC
-
11
-
A
Notes
a. Coss(er) is a fixed capacitance that gives the same energy as Coss while VDS is rising from 0 % to 80 % VDSS
b. Coss(tr) is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 % to 80 % VDSS
S19-0120-Rev. A, 04-Feb-2019
Document Number: 92245
2
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiHB22N60EF
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Axis Title
1000
7V
20
100
6V
10
5V
2.5
1.5
5
10
15
VGS = 10 V
1.0
0.5
10
0
20
-60 -40 -20 0
VDS - Drain-to-Source Voltage (V)
20 40 60 80 100 120 140 160
TJ - Junction Temperature (°C)
Fig. 1 - Typical Output Characteristics
Fig. 4 - Normalized On-Resistance vs. Temperature
Axis Title
24
Axis Title
10000
15 V
14 V
13 V
12 V
11 V
10 V
9V
8V
10000
100 000
TJ = 150 °C
10 000
7V
1000
6V
16
100
5V
8
Ciss
2nd line
C - Capacitance (pF)
2nd line
ID - Drain-to-Source Current (A)
32
1000
1000
Coss
100
Crss
10
100
VGS = 0 V, f = 1 MHz
Ciss = Cgs + Cgd, Cds shorted
Crss = Cgd
Coss = Cds + Cgd
1
10
0
0
5
10
15
0.1
20
0
VDS - Drain-to-Source Voltage (V)
100
200
300
400
500
10
600
VDS - Drain-to-Source Voltage (V)
Fig. 2 - Typical Output Characteristics
Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage
Axis Title
Axis Title
10000
TJ = 25 °C
45
1000
30
TJ = 150 °C
100
15
14
10 000
2nd line
Coss - Output Capacitance (pF)
60
2nd line
ID - Drain-to-Source Current (A)
100
1st line
2nd line
0
1000
2.0
10
0
10000
ID = 11 A
12
10
1000
8
Coss
Eoss
6
100
4
2
VDS = 28.4 V
10
0
0
5
10
15
VGS - Gate-to-Source Voltage (V)
Fig. 3 - Typical Transfer Characteristics
S19-0120-Rev. A, 04-Feb-2019
20
0
10
0
100
200
300
400
500
Eoss - Output Capacitance Stored Energy (µJ)
2nd line
30
8V
3.0
1st line
15 V
14 V
13 V
12 V
11 V
10 V
9V
40
Axis Title
10000
TJ = 25 °C
RDS(on) - Drain-to-Source On-Resistance
(Normalized)
2nd line
ID - Drain-to-Source Current (A)
50
600
VDS - Drain-to-Source Voltage (V)
Fig. 6 - Coss and Eoss vs. VDS
Document Number: 92245
3
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiHB22N60EF
www.vishay.com
Vishay Siliconix
Axis Title
Axis Title
20
10000
VDS = 480 V
VDS = 300 V
VDS = 120 V
9
2nd line
ID - Drain Current (A)
2nd line
VGS - Gate-to-Source Voltage (V)
12
1000
6
100
3
0
15
30
45
15
1000
10
100
5
10
0
10
0
10000
25
60
50
Axis Title
2nd line
VDS - Drain-to-Source Breakdown Voltage (V)
2nd line
ISD - Reverse Drain Current (A)
TJ = 25 °C
TJ = 150 °C
1000
100
1
VGS = 0 V
0.1
0.6
0.8
150
Axis Title
10000
100
0.4
125
Fig. 10 - Maximum Drain Current vs. Case Temperature
Fig. 7 - Typical Gate Charge vs. Gate-to-Source Voltage
0.2
100
TC - Case Temperature (°C)
Qg - Total Gate Charge (nC)
10
75
1.0
1.2
10
1.4
10000
775
750
725
1000
700
675
100
650
625
ID = 1 mA
10
600
-60 -40 -20 0
VSD - Source-Drain Voltage (V)
20 40 60 80 100 120 140 160
TJ - Junction Temperature (°C)
Fig. 11 - Temperature vs. Drain-to-Source Voltage
Fig. 8 - Typical Source-Drain Diode Forward Voltage
Axis Title
Operation in this area
limited by RDS(on)
IDM limited
10000
10
100 1000
µs
Limited by RDS(on) a
1
1 ms
1st line
2nd line
ID - Drain Current (A)
100
100
10 ms
0.1
TC = 25 °C,
TJ = 150 °C,
single pulse
BVDSS limited
0.01
1
10
100
10
1000
VDS - Drain-to-Source Voltage (V)
Fig. 9 - Maximum Safe Operating Area
Note
a. VGS > minimum VGS at which RDS(on) is specified
S19-0120-Rev. A, 04-Feb-2019
Document Number: 92245
4
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiHB22N60EF
www.vishay.com
Vishay Siliconix
Axis Title
1
10000
0.2
0.1
1000
1st line
2nd line
Normalized Effective Transient
Thermal Impedance
Duty cycle = 0.5
0.1
0.05
100
0.02
Single pulse
10
0.01
0.0001
0.001
0.01
0.1
1
Pulse Time (s)
Fig. 12 - Normalized Transient Thermal Impedance, Junction-to-Case
RD
VDS
VDS
tp
VGS
D.U.T.
VDD
Rg
+
- VDD
VDS
10 V
Pulse width ≤ 1 μs
Duty factor ≤ 0.1 %
IAS
Fig. 13 - Switching Time Test Circuit
Fig. 16 - Unclamped Inductive Waveforms
VDS
Qg
10 V
90 %
Qgs
10 %
VGS
Qgd
VG
td(on)
td(off)
tr
tf
Charge
Fig. 14 - Switching Time Waveforms
Fig. 17 - Basic Gate Charge Waveform
Current regulator
Same type as D.U.T.
L
VDS
Vary tp to obtain
required IAS
50 kΩ
D.U.T.
Rg
12 V
0.2 μF
+
- VDD
0.3 μF
+
IAS
D.U.T.
-
VDS
10 V
tp
0.01 Ω
VGS
3 mA
Fig. 15 - Unclamped Inductive Test Circuit
IG
ID
Current sampling resistors
Fig. 18 - Gate Charge Test Circuit
S19-0120-Rev. A, 04-Feb-2019
Document Number: 92245
5
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiHB22N60EF
www.vishay.com
Vishay Siliconix
Peak Diode Recovery dv/dt Test Circuit
+
D.U.T.
Circuit layout considerations
• Low stray inductance
• Ground plane
• Low leakage inductance
current transformer
3
+
2
-
-
4
+
1
Rg
•
•
•
•
1 Driver gate drive
Period
P.W.
+
V
- DD
dv/dt controlled by Rg
Driver same type as D.U.T.
ISD controlled by duty factor “D”
D.U.T. - device under test
D=
P.W.
Period
V GS = 10 V a
2
D.U.T. ISD waveform
Reverse
recovery
current
3 D.U.T. VDS
Body diode forward
current
di/dt
waveform
Diode recovery
dv/dt
Re-applied
voltage
V DD
Body diode forward drop
4 Inductor current
Ripple ≤ 5 %
ISD
Note
a. VGS = 5 V for logic level devices
Fig. 19 - For N-Channel
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?92245.
S19-0120-Rev. A, 04-Feb-2019
Document Number: 92245
6
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
TO-263AB (HIGH VOLTAGE)
A
(Datum A)
3
A
4
4
L1
B
A
E
c2
H
Gauge
plane
4
0° to 8°
5
D
B
Detail A
Seating plane
H
1
2
C
3
C
L
L3
L4
Detail “A”
Rotated 90° CW
scale 8:1
L2
B
A1
B
A
2 x b2
c
2xb
E
0.010 M A M B
± 0.004 M B
2xe
Plating
5
b1, b3
Base
metal
c1
(c)
D1
4
5
(b, b2)
Lead tip
MILLIMETERS
DIM.
MIN.
MAX.
View A - A
INCHES
MIN.
4
E1
Section B - B and C - C
Scale: none
MILLIMETERS
MAX.
DIM.
MIN.
INCHES
MAX.
MIN.
MAX.
A
4.06
4.83
0.160
0.190
D1
6.86
-
0.270
-
A1
0.00
0.25
0.000
0.010
E
9.65
10.67
0.380
0.420
6.22
-
0.245
-
b
0.51
0.99
0.020
0.039
E1
b1
0.51
0.89
0.020
0.035
e
b2
1.14
1.78
0.045
0.070
H
14.61
15.88
0.575
0.625
b3
1.14
1.73
0.045
0.068
L
1.78
2.79
0.070
0.110
2.54 BSC
0.100 BSC
c
0.38
0.74
0.015
0.029
L1
-
1.65
-
0.066
c1
0.38
0.58
0.015
0.023
L2
-
1.78
-
0.070
c2
1.14
1.65
0.045
0.065
L3
D
8.38
9.65
0.330
0.380
L4
0.25 BSC
4.78
5.28
0.010 BSC
0.188
0.208
ECN: S-82110-Rev. A, 15-Sep-08
DWG: 5970
Notes
1. Dimensioning and tolerancing per ASME Y14.5M-1994.
2. Dimensions are shown in millimeters (inches).
3. Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the
outmost extremes of the plastic body at datum A.
4. Thermal PAD contour optional within dimension E, L1, D1 and E1.
5. Dimension b1 and c1 apply to base metal only.
6. Datum A and B to be determined at datum plane H.
7. Outline conforms to JEDEC outline to TO-263AB.
Document Number: 91364
Revision: 15-Sep-08
www.vishay.com
1
AN826
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR D2PAK: 3-Lead
0.420
0.355
0.635
(16.129)
(9.017)
(10.668)
0.145
(3.683)
0.135
(3.429)
0.200
0.050
(5.080)
(1.257)
Recommended Minimum Pads
Dimensions in Inches/(mm)
Return to Index
Document Number: 73397
11-Apr-05
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000