VLMW1301-GS08

VLMW1301 www.vishay.com Vishay Semiconductors Highbright 0603 ChipLED FEATURES • High efficient InGaN technology • Super thin ChipLED with exceptional brightness 1.6 mm x 0.8 mm x 0.55 mm (L x W x H) • High reliability PCB based • Temperature range -20 °C to +80 °C • Chromaticity coordinate categorized according to CIE 1931 per packing unit • Typical color temperature 7000 K • EIA standard package DESCRIPTION • Compatible to IR reflow soldering The new 0603 ChipLED series have been designed in the smallest SMD package. This innovative 0603 ChipLED technology opens the way to • smaller products of higher performance • more design in flexibility • enhanced applications • Available on 7" diameter reel • Preconditioning according to JEDEC® level 2a • ESD-sensitive device • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 The 0603 LED is an obvious solution for small-scale products that are expected to work reliably in an arduous environment. APPLICATIONS • Telecommunication: telephone and fax This package is filled with a mixture of epoxy and yellow converter. indicator and backlighting in • Backlighting for audio and video equipment This yellow converter converts the blue emission partially to yellow, which mixes the remaining blue to give white. • Backlighting in office equipment PRODUCT GROUP AND PACKAGE DATA • Flat backlight for LCDs, switches, and symbols • Indoor and outdoor message boards • Product group: LED • Package: SMD 0603 ChipLED • Product series: standard • Angle of half intensity: ± 65° PARTS TABLE PART VLMW1301-GS08 COLOR White LUMINOUS INTENSITY COORDINATE FORWARD VOLTAGE at IF at IF at IF (mcd) (x, y) (V) TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. 90 - 180 5 - 0.294, 0.286 - 5 2.70 - 3.00 5 InGaN/ yellow converter ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMW1301 PARAMETER DC forward current Surge forward current Power dissipation TEST CONDITION SYMBOL VALUE UNIT Tamb ≤ 25 °C IF 20 mA tp ≤ 10 μs IFSM 0.1 A PV 70 mW Operating temperature range Tamb -20 to +80 °C Storage temperature range Tstg -55 to +105 °C RthJA 550 K/W Thermal resistance junction/ambient Rev. 1.2, 19-Mar-2021 Document Number: 84248 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1301 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMW1301, WHITE PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity IF = 5 mA IV 90 - 180 mcd Chromatically coordinate x acc. to CIE 1931 IF = 5 mA x - 0.294 - Chromatically coordinate y acc. to CIE 1931 IF = 5 mA y - 0.286 - Angle of half intensity IF = 5 mA ϕ - ± 65 - ° Forward voltage IF = 5 mA VF 2.70 - 3.00 V Reverse current (1) VR = 5 V IR - 10 - μA Note (1) Driving the LED in reverse direction is suitable for short term application LUMINOUS INTENSITY CLASSIFICATION GROUP LUMINOUS INTENSITY (mcd) at 5 mA FORWARD VOLTAGE CLASSIFICATION GROUP FORWARD VOLTAGE (V) MIN. MAX. MIN. MAX. A 2.7 2.85 Q2 90 112 B 2.85 3.0 R1 112 140 R2 140 180 Note • Forward voltage is measured with a tolerance of ± 0.1 V. Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 15 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one reel. In order to ensure availability, single wavelength groups will not be orderable. CHROMATICITY COORDINATED GROUPS FOR WHITE SMD LED S1 S2 S3 X Y X Y 0.274 0.226 0.294 0.286 0.274 0.258 0.294 0.319 0.294 0.286 0.314 0.347 0.294 0.254 0.314 0.315 0.274 0.258 0.314 0.282 0.274 0.291 0.314 0.315 0.294 0.319 0.334 0.343 0.294 0.286 0.334 0.311 0.294 0.254 0.314 0.315 0.294 0.286 0.314 0.347 0.314 0.315 0.334 0.376 0.314 0.282 0.334 0.343 S4 S5 S6 Note • Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ± 0.01. Rev. 1.2, 19-Mar-2021 Document Number: 84248 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1301 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 4 Relative Luminous Intensity Normalized at 5 mA IF - Forward Current (A) 25 20 15 10 5 3 2 1 0 0 0 20 40 60 80 100 0 10 Tamb Ambient Temperature (°C) Fig. 1 - Forward Current vs. Ambient Temperature Irel - Relative Luminous Intensity Irel - Relative Intensity 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1 0.1 0 400 450 500 550 600 650 700 750 800 0 λ - Wavelength (nm) 10 20 30 40 50 60 70 80 Tamb - Ambient Temperature (°C) Fig. 2 - Relative Intensity vs. Wavelength Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature 50 0.40 y-Coordinates of Colorgroups IF - Forward Current (mA) 40 10 0.9 40 30 20 10 3.0 3.5 4.0 4.5 5.0 VF - Forward Voltage (V) Fig. 3 - Forward Current vs. Forward Voltage Rev. 1.2, 19-Mar-2021 30 Fig. 4 - Relative Luminous Intensity vs. Forward Current 1.0 0 2.5 20 IF - Forward Current (mA) 0.38 0.36 S6 0.34 0.32 S4 S5 0.30 S2 0.28 0.26 S3 S1 0.24 0.22 0.20 0.25 0.27 0.29 0.31 0.33 0.35 x-Coordinates of Colorgroups Fig. 6 - Coordinates of Colorgroups Document Number: 84248 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1301 www.vishay.com 10° 20° 30° 40° 1.0 50° 0.9 60° 0.8 70° 0.7 80° 0.6 0.4 0.2 ϕ - Angular Displacement Irel - Relative Luminous Intensity 0° Vishay Semiconductors 0 Fig. 7 - Relative Luminous Intensity vs. Angular Displacement Ø 60 ± 1 Ø 178 ± 2 Ø 13 REEL DIMENSIONS in millimeters 9.4 ± 1.5 Drawing-No.: 9.800-5122.01-4 Issue: 2; 03.11.11 22611 Rev. 1.2, 19-Mar-2021 technical drawings according to DIN specifications Document Number: 84248 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1301 www.vishay.com Vishay Semiconductors TAPE DIMENSIONS in millimeters 0.25 0.7 B - B (5:1) 8 + 0.3 - 0.1 1.75 ± 0.1 B B Ø 1.55 ± 0.05 Ø 0.5 2 ± 0.05 4 ± 0.1 4 ± 0.1 User feed direction Cathode 3.5 ± 0.05 technical drawings according to DIN specifications Drawing-No.: 9.700-5385.01-4 Issue: 1; 17.10.11 22612 Reels come in quantity of 3000 units MOQ: 1 reel (3000 pcs) Rev. 1.2, 19-Mar-2021 Document Number: 84248 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1301 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.3 0.3 0.8 0.77 Recommended solder pad footprint 0.8 2.3 0.28 0.55 1.1 0.8 0.3 Cathode 1.6 Technical drawings according to DIN specifications Not indicated tolerances ± 0.1 Drawing-No.: 6.541-5091.01-4 Issue: 2; 10.03.21 SOLDERING PROFILE IR Reflow Soldering Profile for lead (Pb)-free Soldering Preconditioning acc. to JEDEC Level 2a 300 Temperature (°C) max. 260 °C 245 °C 255 255 °C 240 °C 217 °C 250 200 max. 30 s 150 max. 100 s max. 120 s 100 max. Ramp Up 3 °C/s 50 max. Ramp Down 6 °C/s 0 0 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed Fig. 8 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020C) Rev. 1.2, 19-Mar-2021 Document Number: 84248 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW1301 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (Example) RECOMMENDED METHOD OF STORAGE A N B C D E K Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. F G H I L M A. 2D barcode After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: B. PartNo: Vishay part number 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air/nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. C. QTY: quantity D. SelCode: selection bin code E. Country of origin F. PTC: code of manufacturing plant An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. G. Termination finish H. Region code I. Serial#: serial number K. Batch Number: year, week, country code, plant code L. SL: storage location M. Environmental halogen-free Symbols: L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES RoHS, lead (Pb)-free, 2a 1. Shelf life in sealed bag 12 months at