VLMW51P2Q3-GS08

VLMW51P2Q3 Vishay Semiconductors Power SMD LED PLCC2 Plus FEATURES • High efficient InGaN technology • Long life, due to silicone resin casting • Compact package outline 3.5 mm x 3.5 mm x 1.2 mm • Angle of half intensity  = ± 60° • Luminous flux and color categorized per packing unit • Luminous flux ratio per packing unit max./min. < 1.2 • ESD-withstand voltage: up to 2 kV (HBM) according to JESD22-A114-B • Preconditioning: according to JEDEC level 2a • Compatible with IR-reflow soldering profiles according to J-STD-020 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC 22038 DESCRIPTION The VLMW51.. white LED in PLCC2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small package outline (3.5 mm x 3.5 mm x 1.2 mm) the PLCC2 plus is an ideal choice for backlighting, signage, exterior and interior automotive lighting as well as all general lighting applications. APPLICATIONS • Camera flash light • Marker lights • Interior and exterior automotive lighting • Decorative lighting • Architectural lighting • All kinds of general lighting • Backlighting (TFT LCD displays) PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: PLCC2 plus • Product series: SMD power • Angle of half intensity: ± 60° PARTS TABLE PART COLOR, LUMINOUS FLUX TECHNOLOGY WAVELENGTH VLMW51P2Q3-GS08 White,  = (23.5 to 39.8) lm InGaN Document Number 83420 Rev. 1.1, 22-Mar-11 For technical support, please contact: LED@vishay.com www.vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW51P2Q3 Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMW51.. PARAMETER TEST CONDITION DC Forward current tp  10 µs Surge forward current Power dissipation SYMBOL VALUE UNIT IF 180 mA IFSM 350 mA mW PV 738 Junction temperature Tjmax. 125 °C Operating temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 40 to + 100 °C Thermal resistance junction/ solder point RthJS 45 K/W RthJA 125 K/W Thermal resistance junction/ ambient Mounted on PC board total Cu area > 900 mm2 Note: Not designed for reverse bias OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMW51.., WHITE PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. Luminous Flux IF = 150 mA VLMW51P2Q3 V 23.5 30.6 39.8 Luminous intensity IF = 150 mA VLMW51P2Q3 IV 10 Chromaticity coordinate x, y acc. to CIE 1931 IF = 150 mA x y 0.33 0.33 Angle of half intensity IF = 150 mA  ± 60 Forward voltage IF = 150 mA VF 3 3.4 UNIT lm cd deg 4.1 V Note: Not designed for reverse bias LUMINOUS FLUX CLASSIFICATION GROUP LUMINOUS FLUX (lm) STANDARD MIN. MAX. P2 23.5 26.8 P3 26.8 30.6 Q2 30.6 34.8 Q3 34.8 39.8 Note: Luminous flux is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable. www.vishay.com 2 For technical support, please contact: LED@vishay.com Document Number 83420 Rev. 1.1, 22-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW51P2Q3 Vishay Semiconductors CHROMATICITY COORDINATED GROUPS FOR WHITE PLCC2 PLUS YU YL XU XL WU X Y X Y 0.274 0.301 0.317 0.325 0.283 0.284 0.319 0.310 0.307 0.316 0.329 0.319 0.303 0.333 0.329 0.336 0.283 0.284 0.329 0.354 0.290 0.270 0.329 0.336 0.310 0.299 0.345 0.350 0.307 0.316 0.347 0.368 0.303 0.333 0.329 0.336 0.307 0.316 0.329 0.319 0.317 0.325 0.343 0.331 0.315 0.343 0.345 0.350 0.307 0.316 0.347 0.368 0.310 0.299 0.345 0.350 0.319 0.310 0.361 0.365 0.317 0.325 0.364 0.383 0.315 0.343 0.345 0.350 0.317 0.325 0.343 0.331 0.329 0.336 0.357 0.343 0.329 0.354 0.361 0.365 WL VU VL UU UL Note: Chromaticity coordinate groups are tested at a current pulse direction of 25 ms and a tolerance of ± 0.01. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 2.0 200 RthJA = 90 K/W 160 140 120 RthJA = 125 K/W 100 80 60 40 1.8 Relative Luminous Flux (normalized at 150 mA) IF - Forward Current (mA) 180 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 20 0 0 0 22039 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Figure 1. Forward Current vs. Ambient Temperature Document Number 83420 Rev. 1.1, 22-Mar-11 0 22040 50 100 150 200 250 300 350 400 IF - Forward Current (mA) Figure 2. Relative Luminous Intensity vs. Forward Current For technical support, please contact: LED@vishay.com www.vishay.com 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW51P2Q3 Vishay Semiconductors 0.39 IF - Forward Current (mA) 500 4500 K 0.37 5000 K UU 400 5650 K y-Coordinates 0.35 300 200 100 0.33 UL WU VL XU WL 0.31 XL 10 000 K YU 0.29 YL 0.27 0 2 22041 2.5 3 3.5 4 0.25 0.26 4.5 VF - Forward Voltage (V) 0.28 22042 Figure 3. Forward Current vs. Forward Voltage IV rel - Relative Luminous Intensity VU 6300 K 7000 K 0.3 0.32 0.34 0.36 0.38 x-Coordinates Figure 6. White Grouping SMD 100 80 60 40 20 0 400 500 600 700 800 λ - Wavelength (nm) 16196_1 Figure 4. Relative Intensity vs. Wavelength 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement IV rel - Relative Luminous Intensity 0° 80° 0.6 0.4 0.2 0 95 10319 Figure 5. Rel. Luminous Intensity vs. Angular Displacement www.vishay.com 4 For technical support, please contact: LED@vishay.com Document Number 83420 Rev. 1.1, 22-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW51P2Q3 Vishay Semiconductors Ø 180 Ø 62.5 - 2.5 REEL DIMENSIONS in millimeters Ø 13 ± 0.2 12.4 + 2 Label area with depression (Measured at outer edge) 18.4 (max., Measured at hub) technical drawings according to DIN specifications Not indicated tolerances ± 0.5 GS08 = 1000 pcs Material: black static dissipative Drawing-No.: 9.800-5104.01-4 Issue: 2; 19.03.10 22067 Document Number 83420 Rev. 1.1, 22-Mar-11 For technical support, please contact: LED@vishay.com www.vishay.com 5 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW51P2Q3 Vishay Semiconductors TAPING AND ORIENTATION DIMENSIONS in millimeters Reels come in quantity of 1000 units. 3.75 ± 0.1 2.2 ± 0.1 3.75 ± 0.1 Package marking + 0.3 12 - 0.1 2 ± 0.05 5.5 ± 0.05 4 ± 0.1 1.75 ± 0.1 Ø 1.5 + 0.1 0.279 ± 0.02 Ø 1.5 + 0.25 8 ± 0.1 200 mm min. for Ø 180 reel Trailer 480 mm min. for Ø 180 reel Component Leader User feed direction Drawing-No.: 9.700-5348.01-4 technical drawings according to DIN specifications Issue: 1; 01.03.10 22066 www.vishay.com 6 For technical support, please contact: LED@vishay.com Document Number 83420 Rev. 1.1, 22-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW51P2Q3 Vishay Semiconductors RECOMMENDED PAD DESIGN DIMENSIONS in millimeters 2.6 0.05 Package mark A 3.7 ± 0.2 Ø 2.6 1.5 3.1 3.5 ± 0.2 C 0.5 0.7 3.5 ± 0.2 1.2 ± 0.2 Recommended solder pad Additional area covered by solder resist for improved heat dissipation. technical drawings according to DIN specifications 0.5 3.4 4.5 9.4 1.4 2.8 10 Drawing-No.: 6.541-5082.01-4 Issue: 2; 23.07.10 22065 Document Number 83420 Rev. 1.1, 22-Mar-11 For technical support, please contact: LED@vishay.com www.vishay.com 7 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW51P2Q3 Vishay Semiconductors FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. SOLDERING PROFILE IR Reflow Soldering Profile for lead (Pb)-free soldering Preconditioning acc. to JEDEC Level 2a 300 max. 260 °C 245 °C 255 255°C°C 240 °C 217 °C 250 T [°C] 200 max. 30 s 150 max. 100 s max. 120 s 100 max. Ramp Down 6 °C/s max. Ramp Up 3 °C/s 50 0 0 50 100 150 250 200 300 t [s] 19470-3 max. 2 cycles allowed Figure 7. Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020) BARCODE-PRODUCT-LABEL EXAMPLE: 106 A H RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity  60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. 37 L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES B C D E F G 19795 2a 1. Shelf life in sealed bag 12 months at