TLP4197G(F)

TLP4197G TOSHIBA Photocoupler Photorelay TLP4197G PBX Telecommunication Modem･FAX Cards, Modems In PC Measurement Instrumentation Unit: mm The TOSHIBA TLP4197G consists of an infrared emitting diode optically coupled to a photo-MOSFET in a SOP, which is suitable for surface mount assembly. The TLP4197GA is suitable for replacement of mechanical relays in many applications which require space savings. • 6 pin SOP (2.54SOP6): 2.1 mm high, 2.54 mm pitch • 1-form-B • Peak off-state voltage: 350 V (min) • Trigger LED current: 3 mA (max) • On-state current: 120 mA (max) • On-state resistance: 25 Ω (max) • Isolation voltage: 1500 Vrms (min) • UL-recognized: UL 1577, File No.E67349 Pin Configuration (top view) JEDEC ― JEITA ― TOSHIBA 11-7C1 Weight: 0.13 g (typ.) 1 6 1: ANODE 2: CATHODE 2 5 4: DRAIN D1 5: SOURCE 3 4 6: DRAIN D2 Schematic 1 6 2 5 4 Start of commercial production 2001-05 © 2019 Toshiba Electronic Devices & Storage Corporation 1 2019-06-24 TLP4197G Absolute Maximum Ratings (Ta = 25°C) Characteristics LED Forward current Symbol Rating Unit IF 50 mA Forward current derating (Ta ≥ 25°C) ∆IF/°C -0.5 mA/°C Peak forward current (100 μs pulse, 100 pps) IFP 1 A Reverse voltage VR 5 V Diode power dissipation PD 50 mW ΔPD /°C -0.5 mW/°C Tj 125 °C VOFF 350 V Diode power dissipation derating (Ta ≥ 25°C) Junction temperature Off-state output terminal voltage A connection Detector On-state current B connection On-state current derating (Ta ≥ 25°C) Output power dissipation Output power dissipation derating (Ta ≥ 25°C) 120 ION 120 C connection 240 A connection -1.2 B connection ∆ION/°C C connection -1.2 360 PO C connection 403 -3.6 ΔPO /°C C connection Junction temperature mW 201 A connection B connection mA/°C -2.4 A connection B connection mA -2.0 mW /°C -4.0 Tj 125 °C Operating temperature range Topr -40 to 85 °C Storage temperature range Tstg -55 to 125 °C Lead soldering temperature (10 s) Tsol 260 °C Isolation voltage (AC, 60 s, R.H. ≤ 60 %) BVS 1500 Vrms (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two-terminal device: LED side pins shorted together, and DETECTOR side pins and 6 shorted together. Recommended Operating Conditions Characteristics Symbol Min Typ. Max Unit VDD ― ― 280 V Supply voltage Forward current IF 5 ― 25 mA On-state current ION ― ― 120 mA Operating temperature Topr -20 ― 65 °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. © 2019 Toshiba Electronic Devices & Storage Corporation 2 2019-06-24 TLP4197G Circuit Connections 1 6 2 5 3 4 LOAD AC or DC A Connection © 2019 Toshiba Electronic Devices & Storage Corporation 1 6 2 5 3 4 B Connection 3 LOAD DC 1 6 2 5 3 4 LOAD DC C Connection 2019-06-24 TLP4197G Electrical Characteristics (Ta = 25°C) Detector LED Characteristics Symbol Test Condition Min Typ. Max Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V   10 μA Capacitance CT VF = 0 V, f = 1 MHz  30  pF Off-state current IOFF VOFF = 350 V, IF = 5 mA   1 μA Capacitance COFF V = 0 V, f = 1 MHz, IF = 5 mA  65  pF Min Typ. Max Unit Coupled Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Trigger LED current IFC IOFF = 10 μA  1 3 mA Return LED current IFT ION = 120 mA 0.1   mA ION = 120 mA  15 25 ION = 120 mA  8 14 ION = 240 mA  4  Min Typ. Max Unit  0.8  pF 1014  Ω 1500   Vrms Min Typ. Max Unit   1 ms   3 ms A connection On-state resistance B connection RON C connection Ω Isolation Characteristics (Ta = 25°C) Characteristics Symbol Capacitance input to output Test Condition CS VS = 0 V, f = 1 MHz Isolation resistance RS VS = 500 V, R.H.