TLP592G

TLP592G TOSHIBA Photocoupler Photorelay TLP592G Telecommunications PBX Modems The Toshiba TLP592G consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a six lead plastic DIP package (DIP6). The TLP592G is a bi-directional switch can replace mechanical relays in many applications. • • • • • • • • 6-pin DIP (DIP6) 1-Form-A Peak Off-state voltage: 350 V (min) Trigger LED current: 3 mA (max) On-state current: 110 mA (max) On-state resistance: 35 Ω (max, t < 1 s) On-state resistance: 50 Ω (max, continuous) Isolation voltage: 2500 Vrms (min) JEDEC ― ― 11-7A8 Unit: mm Pin Configuration (top view) JEITA TOSHIBA Weight: 0.4 g (typ.) 1 6 1: Anode 2 5 2: Cathode 4: Drain D1 5: Source 6: Drain D2 3 4 Schematic 1 6 2 5 4 1 2007-10-01 TLP592G Absolute Maximum Rating (Ta = 25°C) Characteristics Forward current Forward current derating (Ta > 25°C) = LED Peak forward current (100 μs pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage A connection On-state current Detector On-state current derating (Ta > 25°C) = Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) < Isolation voltage (AC, 1 min, R.H. = 60%) (Note 1) B connection C connection A connection B connection C connection Tj Tstg Topr Tsol BVS ΔION/°C ION Symbol IF ΔIF/°C IFP VR Tj VOFF Rating 50 −0.5 1 5 125 350 120 120 240 −1.2 −1.2 −2.4 125 −55~125 −40~85 260 2500 °C °C °C °C Vrms mA/°C mA Unit mA mA/°C A V °C V Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two-terminal device: LED side pins shorted together, and detector side pins shorted together. Recommended Operating Conditions Characteristics Supply voltage Forward current On-state current Operating temperature Symbol VDD IF ION Topr Min ⎯ 5 ⎯ −20 Typ. ⎯ 7.5 ⎯ ⎯ Max 280 25 100 65 Unit V mA mA °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Circuit Connections 1 2 3 6 5 4 LOAD AC or DC 1 2 3 6 5 4 LOAD 1 2 3 6 5 4 LOAD DC DC A Connection B Connection C Connection 2 2007-10-01 TLP592G Individual Electrical Characteristics (Ta = 25°C) Characteristics Forward voltage LED Reverse current Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 350 V V = 0, f = 1 MHz Min 1.0 ⎯ ⎯ ⎯ ⎯ Typ. 1.15 ⎯ 30 ⎯ 30 Max 1.3 10 ⎯ 1 ⎯ Unit V μA pF μA pF Coupled Electrical Characteristics (Ta = 25°C) Characteristics Trigger LED current Return LED current A connection On-state resistance B connection C connection RON Symbol IFT IFC Test Condition ION = 120 mA IOFF = 100 μA ION = 120 mA, IF = 5 mA, t < 1 s ION = 120 mA, IF = 5 mA ION = 120 mA, IF = 5 mA ION = 240 mA, IF = 5 mA Min ⎯ 0.1 ⎯ ⎯ ⎯ ⎯ Typ. 1 ⎯ 25 35 28 14 Max 3 ⎯ 35 50 40 20 Ω Unit mA mA Isolation Characteristics (Ta = 25°C) Characteristics Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0 V, f = 1 MHz VS = 500 V, R.H. < 60% = AC, 1 min Isolation voltage BVS AC, 1 s, in oil DC, 1 min, in oil Min ⎯ 5 × 10 10 Typ. 0.8 10 14 Max ⎯ ⎯ ⎯ ⎯ ⎯ Unit pF Ω Vrms Vdc 2500 ⎯ ⎯ ⎯ 5000 5000 Switching Characteristics (Ta = 25°C) Characteristics Turn-on time Turn-off time Symbol tON tOFF Test Condition RL = 200 Ω VDD = 20 V, IF = 5 mA Min ⎯ (Note 2) ⎯ Typ. 0.3 0.1 Max 1 1 Unit ms Note 2: Switching time test circuit IF VDD IF VOUT 2 4 VOUT 10% tON 90% tOFF 1 6 RL 3 2007-10-01 TLP592G IF – Ta 100 280 ION – Ta (mA) C connection IF (mA) 240 200 160 120 80 40 0 −20 80 60 Allowable On-sate current ION Allowable forward current A, B connection 40 20 0 −20 0 20 40 60 80 100 120 0 20 40 60 80 100 120 Ambient temperature Ta (°C) Ambient temperature Ta (°C) IF – V F 100 Ta = 25°C 200 Ta = 25°C IF = 5 m A A connection 100 ION – VON 10 On-state current ION (mA) 30 Forward current IF (mA) 3 0 1 −100 0.3 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 −200 −4 −3 −2 −1 0 1 2 3 4 Forward voltage VF (V) On-state voltage VON (V) RON – Ta 50 ION = 120 mA IF = 5 m A t