VO14642AABTR

VO14642AT, VO14642AABTR Vishay Semiconductors 1 Form A Solid State Relay FEATURES S S' • High speed SSR - ton/toff < 800 μs • Maximum RON 0.25  • Isolation test voltage 5300 VRMS • • • • • • • • Load voltage 60 V Load current 2 A DC configuration DIP-6 package Clean bounce free switching TTL/CMOS compatible input Available on tape and reel Pure tin leads Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC S 6 DC 5 S' 4 1 2 3 20091 DESCRIPTION The VO14642AT are high speed SPST normally open (1 form A) solid-state relay in a DIP-6 package. The relays are constructed as a multi-chip hybrid device. Actuation control is via an infrared LED. The output switch is a combination of a photodiode array with MOSFET switches. The relays can be configured for AC/DC or DC only operation. APPLICATIONS • Instrumentation • Industrial controls • Security AGENCY APPROVALS UL1577: file no. E52744 system code H, double protection cUL - UL1577: file no. E52744 system code H, double protection Notes • IEC 60747-5-2 (VDE 0884) capable, consult sales representative for details • Agency approvals are valid only for ambient temperature range - 40 °C to 85 °C ORDERING INFORMATION DIP SMD V O 1 4 PART NUMBER 6 4 2 A ELECTR. VARIATION x x T R > 0.1 mm PACKAGE CONFIG. TAPE AND REEL UL, cUL 7.62 mm PACKAGE SMD-6, tape and reel DIP-6, Tubes VO14642AABTR VO14642AT Document Number: 81646 Rev. 1.5, 26-Apr-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO14642AT, VO14642AABTR Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER INPUT LED continous forward current LED reverse voltage LED power dissipation OUTPUT DC or peak AC load voltage Load current (DC only) Peak load current (AC/DC) Output power dissipation SSR Total power dissipation Ambient temperature range Storage temperature range Soldering temperature (2) Isolation test voltage t  10 s max. for 1 s Pdiss Tamb Tstg Tsld VISO 330 - 55 to + 85 - 55 to + 125 260 5300 mW °C °C °C VRMS t = 10 ms at 25 °C VL IL ILPK Pdiss 60 2 3.6 250 V A A mW at 25 °C IF VR Pdiss 50 5 80 mA V mW (1) 1 Form A Solid State Relay (Tamb = 25 °C, unless otherwise specified) SYMBOL VALUE UNIT TEST CONDITION Notes (1) Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ABSOLUTE MAXIMUM RATING CURVE 1.2 IF = 5 mA to 15 mA 1.0 Load Current (A) 0.8 0.6 0.4 0.2 0 - 55 - 40 - 20 0 20 40 60 80 100 20990-1 Temperature (°C) Fig. 1 - Load Current (AC/DC) vs. Temperature www.vishay.com 2 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 81646 Rev. 1.5, 26-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO14642AT, VO14642AABTR 1 Form A Solid State Relay Vishay Semiconductors THERMAL CHARACTERISTICS PARAMETER Maximum LED junction temperature Maximum output die junction temperature Thermal resistance, junction emitter to board Thermal resistance, junction emitter to case Thermal resistance, junction detector to board Thermal resistance, junction detector to case Thermal resistance, junction emitter to junction detector Thermal resistance, case to ambient TEST CONDITION at 25 °C at 25 °C at 25 °C at 25 °C at 25 °C at 25 °C at 25 °C at 25 °C SYMBOL Tjmax. Tjmax. EB EC DB DC ED CA VALUE 125 125 176 208 67 134 310 2180 UNIT °C °C °C/W °C/W °C/W °C/W °C/W °C/W Note • The thermal model is represented in the thermal network below. Each resistance value given in this model can be used to calculate the temperatures at each node for a given operating condition. The thermal resistance from board to ambient will be dependent on the type of PCB, layout and thickness of copper traces. For a detailed explanation of the thermal model, please reference Vishay's thermal characteristics of optocouplers application note. TA θCA TC θDC TJD θDE Package θEC TJE θDB TB θBA 19996 θEB TA ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER INPUT LED forward current, switch turn-on LED forward current, switch turn-off LED reverse current LED forward voltage OUTPUT On-resistance (AC/DC) On-resistance (DC only) Off-state leakage current IF = 10 mA, IL = 1 A IF = 10 mA, IL = 2 A IF = 0 mA, VL = 60 V RON RON ILEAK 0.18 0.05 0.25 0.07 1   μA IL = 1 A, VL  0.5 V, t = 10 ms VL = 60 V, IL < 1 μA VR = 5 V IF = 10 mA IFon IFoff IR VF 1 1.3 50 10 1.5 0.5 2 mA μA μA V TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Document Number: 81646 Rev. 1.5, 26-Apr-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO14642AT, VO14642AABTR Vishay Semiconductors PIN CONFIGURATION 1 Form A Solid State Relay AC/DC configuration 1 2 3 6 Load 5 4 Load Anode Cathode Do not use DC only configuration 1 2 3 6 5 4 Anode Cathode Do not use 20545 SWITCHING CHARACTERISTICS (AC/DC CONNECTION) PARAMETER Turn-on time Turn-off time Turn-on time Turn-off time TEST CONDITION IF = 10 mA, VL = 30 V, IL = 200 mA IF = 10 mA, VL = 30 V, IL = 200 mA IF = 10 mA, VL = 5 V, IL = 1 A IF = 10 mA, VL = 5 V, IL = 1 A SYMBOL ton toff ton toff MIN. TYP. 370 50 550 18 VL 1.25 ms MAX. 800 800 UNIT μs μs μs μs Input Output TON TOFF Output 10 % 20991-1 90 % www.vishay.com 4 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 81646 Rev. 1.5, 26-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO14642AT, VO14642AABTR 1 Form A Solid State Relay Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER Climatic classification Pollution degree Tracking resistance (comparative tracking index) Highest allowable overvoltage Maximum working insulation voltage Insulation resistance at 25 °C Insulation resistance at TS Insulation resistance at 100 °C Partial discharge test voltage Isolation test voltage Safety limiting values maximum values allowed in the event of a failure Case temperature Input current Output power Measured from input terminals to output terminals, shortest distance through air Measured from input terminals to output terminals, shortest distance path along body TEST CONDITION IEC 68 part 1 DIN VDE 0109 Insulation group IIIa Transient overvoltage Recurring peak voltage VIO = 500 V VIO = 500 V VIO = 500 V Method b, Vpd = VIORM x 1.875 1s CTI VIOTM VIORM RIS RIS RIS Vpd VISO TSI ISI PSO 165 150 400 7 175 8000 890  1012  10 9  1011 1669 5300 Vpeak Vpeak    Vpeak VRMS °C mA mW mm SYMBOL MIN. TYP. 40/85/21 2 MAX. UNIT Minimum external air gap (clearance distance) Minimum external tracking (creepage distance) 7 mm Note • This SSR is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 50 14 VR = 5 V LED Forward Current (mA) LED leakage current (nA) 40 30 20 10 0 0 0.4 85 °C 25 °C 12 10 8 6 4 2 - 55 - 35 - 15 - 55 °C 0.8 1.2 1.6 5 25 45 65 85 22359 LED Forward Voltage (V) Fig. 2 - LED Forward Voltage vs. Current 22360 Temperature (°C) Fig. 3 - LED Leakage Current vs. Temperature Document Number: 81646 Rev. 1.5, 26-Apr-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO14642AT, VO14642AABTR Vishay Semiconductors 1 Form A Solid State Relay 12 000 80 LED Forward Current for Switch Turn-on (%), normalized to 25 °C VLoad = 60 V 9000 IL = 1 A 60 40 20 0 - 20 - 40 - 55 - 35 - 15 Leakage (nA) 6000 3000 0 - 55 - 35 - 15 22361 5 25 45 65 85 22364 5 25 45 65 85 Temperature (°C) Temparature (°C) Fig. 4 - Output Leakage Current vs. Temperature Fig. 7 - LED Current for Switch Turn-on vs. Temperature 1.6 IF = 30 mA 1.5 IF = 50 mA ON-Resistance, Normalized to 25 °C 1.8 1.6 1.4 1.2 1.0 0.8 0.6 - 55 - 35 - 15 IF = 10 mA IL = 1 A LED Voltage (V) 1.4 1.3 1.2 1.1 1.0 - 55 - 35 - 15 IF = 1 mA IF = 5 mA IF = 10 mA 5 25 45 65 85 5 25 45 65 85 22362 Temperature (°C) Fig. 5 - LED Voltage vs. Temperature 22365 Temperature (°C) Fig. 8 - On-resistance vs. Temperature 19.0 Diode Breakdown Voltage (V) 25 IL = 5 μA IF = 10 mA, IL = 1 A, PW = 2.5 ms 21 18.5 18.0 17.5 17.0 16.5 - 55 - 35 - 15 Turn-off Time (μs) 5 25 45 65 85 17 13 9 5 - 55 - 35 - 15 5 25 45 65 85 22363 Temperature (°C) 22366 Temperature (°C) Fig. 9 - Turn-off Time vs. Temperature Fig. 6 - Diode Breakdown Voltage vs. Temperatur www.vishay.com 6 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 81646 Rev. 1.5, 26-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO14642AT, VO14642AABTR 1 Form A Solid State Relay Vishay Semiconductors 76 IL = 1 A, PW = 2.5 ms 61 46 31 16 1 5 22367 1200 IF = 10 mA 800 - 55 °C - 10 °C 400 0 - 400 - 800 - 1200 - 0.25 22370 Load Current (mA) Turn-off Time (μs) - 55 °C 25 °C 85 °C 25 °C 85 °C 10 15 20 - 0.15 - 0.05 0.05 0.15 0.25 LED (mA) Fig. 10 - Turn-off Time vs. LED Load Voltage (V) Fig. 13 - Load Current vs. Load Voltage 750 350 Switch Capacitance (pF) IF = 10 mA, IL = 1 A, PW = 2.5 ms 700 300 250 200 150 100 50 0 0 20765 Turn-on Time (μs) 650 600 550 500 450 - 55 - 35 - 15 5 25 45 65 85 20 40 60 22368 Temperature (°C) Fig. 11 - Turn-on Time vs. Temperature Applied Voltage (V) Fig. 14 - Switch Capacitance vs. Applied Voltage 1800 1600 IL = 1 A, PW = 2.5 ms Turn-on Time (μs) 1400 1200 1000 800 600 400 200 5 10 15 20 25 °C 85 °C - 55 °C 22369 LED (mA) Fig. 12 - Turn-on Time vs. LED Document Number: 81646 Rev. 1.5, 26-Apr-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 7 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO14642AT, VO14642AABTR Vishay Semiconductors PACKAGE DIMENSIONS in millimeters pin one ID 3 2 1 0.76 6.3 6.5 ISO method A 4 5 8.5 8.7 1.22 1.32 3.30 3.81 4° typ. 0.84 typ. 0.46 0.51 3° to 9° 18° 3.30 3.81 0.20 0.30 7.62 to 8.81 2.54 typ. i178014_2 1 Form A Solid State Relay 2.54 R 0.25 1.78 6 8 min. 11.05 1.52 Option 7 7.62 typ. 7.62 typ. 1 min. 0.7 4.6 4.1 8 min. 8.4 min. 10.3 max. 0.84 typ. PACKAGE MARKING VO14642 V YWW H 68 Note • Tape and reel suffix (TR) is not part of the package marking. www.vishay.com 8 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 81646 Rev. 1.5, 26-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1