0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
BCW70LT1G

BCW70LT1G

  • 厂商:

    ONSEMI(安森美)

  • 封装:

    SOT346

  • 描述:

    TRANS PNP 45V 0.1A SOT-23

  • 数据手册
  • 价格&库存
BCW70LT1G 数据手册
BCW70LT1G General Purpose Transistor PNP Silicon Features • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant http://onsemi.com MAXIMUM RATINGS Rating Collector−Emitter Voltage Emitter−Base Voltage Collector Current − Continuous Symbol VCEO VEBO IC Value −45 −5.0 −100 Unit Vdc Vdc mAdc 1 BASE COLLECTOR 3 2 EMITTER THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR-5 Board (Note 1) TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Total Device Dissipation Alumina Substrate, (Note 2) @TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Junction and Storage Temperature Symbol PD Max 225 1.8 RqJA PD 556 300 2.4 RqJA TJ, Tstg 417 −55 to +150 Unit mW mW/°C °C/W mW mW/°C °C/W °C 1 2 SOT−23 (TO−236AB) CASE 318 STYLE 6 3 MARKING DIAGRAM Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR−5 = 1.0 x 0.75 x 0.062 in. 2. Alumina = 0.4 x 0.3 x 0.024 in. 99.5% alumina H2 M G G 1 H2 = Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Device BCW70LT1G Package SOT−23 (Pb−Free) Shipping† 3000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2009 August, 2009 − Rev. 3 1 Publication Order Number: BCW70LT1/D BCW70LT1G ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic OFF CHARACTERISTICS Collector−Emitter Breakdown Voltage (IC = −2.0 mAdc, IB = 0) Collector−Emitter Breakdown Voltage (IC = −100 mAdc, VEB = 0) Emitter−Base Breakdown Voltage (IE = −10 mAdc, IC = 0) Collector Cutoff Current (VCB = −20 Vdc, IE = 0) (VCB = −20 Vdc, IE = 0, TA = 100°C) ON CHARACTERISTICS DC Current Gain (IC = −2.0 mAdc, VCE = −5.0 Vdc) Collector−Emitter Saturation Voltage (IC = −10 mAdc, IB = −0.5 mAdc) Base−Emitter On Voltage (IC = −2.0 mAdc, VCE = −5.0 Vdc) SMALL−SIGNAL CHARACTERISTICS Output Capacitance (IE = 0, VCB = −10 Vdc, f = 1.0 MHz) Noise Figure (IC = −0.2 mAdc, VCE = −5.0 Vdc, RS = 2.0 kW, f = 1.0 kHz, BW = 200 Hz) Cobo NF − − 7.0 10 pF dB hFE VCE(sat) VBE(on) 215 − −0.6 500 −0.3 −0.75 − Vdc Vdc V(BR)CEO V(BR)CES V(BR)EBO ICBO −45 −50 −5.0 − − − − − −100 −10 Vdc Vdc Vdc nAdc mAdc Symbol Min Max Unit http://onsemi.com 2 BCW70LT1G TYPICAL NOISE CHARACTERISTICS (VCE = − 5.0 Vdc, TA = 25°C) 10 7.0 en, NOISE VOLTAGE (nV) 5.0 IC = 10 mA 30 mA 3.0 2.0 1.0 mA 100 mA 300 mA BANDWIDTH = 1.0 Hz RS ≈ 0 In, NOISE CURRENT (pA) 1.0 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 1.0 10 20 50 100 200 500 1.0 k f, FREQUENCY (Hz) 2.0 k 5.0 k 10 k 0.1 10 20 50 100 200 500 1.0 k 2.0 k f, FREQUENCY (Hz) 5.0 k 10 k 300 mA 100 mA 30 mA 10 mA IC = 1.0 mA BANDWIDTH = 1.0 Hz RS ≈ ∞ Figure 1. Noise Voltage Figure 2. Noise Current NOISE FIGURE CONTOURS (VCE = − 5.0 Vdc, TA = 25°C) 1.0 M 500 k 200 k 100 k 50 k 20 k 10 k 5.0 k 2.0 k 1.0 k 500 200 100 10 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) 0.5 dB 1.0 dB 2.0 dB 3.0 dB 5.0 dB 500 700 1.0 k BANDWIDTH = 1.0 Hz RS , SOURCE RESISTANCE (OHMS) 1.0 M 500 k 200 k 100 k 50 k 20 k 10 k 5.0 k 2.0 k 1.0 k 500 200 100 10 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) BANDWIDTH = 1.0 Hz RS , SOURCE RESISTANCE (OHMS) 0.5 dB 1.0 dB 2.0 dB 3.0 dB 5.0 dB 500 700 1.0 k Figure 3. Narrow Band, 100 Hz Figure 4. Narrow Band, 1.0 kHz RS , SOURCE RESISTANCE (OHMS) 1.0 M 500 k 200 k 100 k 50 k 20 k 10 k 5.0 k 2.0 k 1.0 k 500 200 100 10 20 30 50 70 100 10 Hz to 15.7 kHz Noise Figure is Defined as: NF + 20 log10 0.5 dB 1.0 dB 2.0 dB 3.0 dB 5.0 dB 200 300 500 700 1.0 k IC, COLLECTOR CURRENT (mA) en2 ) 4KTRS ) In 2RS2 1 2 4KTRS en = Noise Voltage of the Transistor referred to the input. (Figure 3) I = Noise Current of the Transistor referred to the input. n (Figure 4) K = Boltzman’s Constant (1.38 x 10−23 j/°K) T = Temperature of the Source Resistance (°K) R = Source Resistance (Ohms) S Figure 5. Wideband http://onsemi.com 3 BCW70LT1G TYPICAL STATIC CHARACTERISTICS VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) 1.0 100 IC, COLLECTOR CURRENT (mA) TA = 25°C 0.8 IC = 1.0 mA 10 mA 50 mA 100 mA TA = 25°C PULSE WIDTH = 300 ms 80 DUTY CYCLE ≤ 2.0% 300 mA 60 IB = 400 mA 350 mA 250 mA 200 mA 150 mA 0.6 0.4 40 100 mA 50 mA 0.2 20 0 0.002 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 IB, BASE CURRENT (mA) 0 5.0 10 20 0 5.0 10 15 20 25 30 35 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 40 Figure 6. Collector Saturation Region Figure 7. Collector Characteristics TJ = 25°C θV, TEMPERATURE COEFFICIENTS (mV/°C) 1.4 1.2 V, VOLTAGE (VOLTS) 1.0 0.8 1.6 *APPLIES for IC/IB ≤ hFE/2 0.8 *qVC for VCE(sat) 0 - 55°C to 25°C 0.8 25°C to 125°C 1.6 qVB for VBE 0.2 - 55°C to 25°C 50 100 25°C to 125°C VBE(sat) @ IC/IB = 10 0.6 VBE(on) @ VCE = 1.0 V 0.4 0.2 VCE(sat) @ IC/IB = 10 0 0.1 0.2 0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) 50 100 2.4 0.1 0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) Figure 8. “On” Voltages Figure 9. Temperature Coefficients 500 300 200 100 70 50 30 20 td @ VBE(off) = 0.5 V 10 7.0 5.0 1.0 tr VCC = 3.0 V IC/IB = 10 TJ = 25°C 1000 700 500 300 200 t, TIME (ns) 100 70 50 30 20 10 -1.0 ts VCC = - 3.0 V IC/IB = 10 IB1 = IB2 TJ = 25°C t, TIME (ns) tf 2.0 3.0 20 30 5.0 7.0 10 IC, COLLECTOR CURRENT (mA) 50 70 100 - 2.0 - 3.0 - 5.0 - 7.0 -10 - 20 - 30 IC, COLLECTOR CURRENT (mA) - 50 - 70 -100 Figure 10. Turn−On Time Figure 11. Turn−Off Time http://onsemi.com 4 BCW70LT1G TYPICAL DYNAMIC CHARACTERISTICS f T, CURRENT-GAIN — BANDWIDTH PRODUCT (MHz) 500 TJ = 25°C 300 200 VCE = 20 V 5.0 V C, CAPACITANCE (pF) 10 TJ = 25°C 7.0 Cib 5.0 3.0 2.0 Cob 100 70 50 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 50 1.0 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 IC, COLLECTOR CURRENT (mA) VR, REVERSE VOLTAGE (VOLTS) Figure 12. Current−Gain — Bandwidth Product Figure 13. Capacitance r(t) TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 D = 0.5 0.2 0.1 0.05 P(pk) 0.02 0.01 t1 SINGLE PULSE t2 2.0 5.0 10 20 50 t, TIME (ms) 100 200 FIGURE 16 DUTY CYCLE, D = t1/t2 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 (SEE AN-569) ZqJA(t) = r(t) w RqJA TJ(pk) - TA = P(pk) ZqJA(t) 5.0 k 10 k 20 k 50 k 100 0.01 0.01 0.02 0.05 0.1 0.2 0.5 1.0 500 1.0 k 2.0 k Figure 14. Thermal Response 104 VCC = 30 V IC, COLLECTOR CURRENT (nA) 103 102 101 100 10-1 10-2 ICEO DESIGN NOTE: USE OF THERMAL RESPONSE DATA A train of periodical power pulses can be represented by the model as shown in Figure 16. Using the model and the device thermal response the normalized effective transient thermal resistance of Figure 14 was calculated for various duty cycles. To find ZqJA(t), multiply the value obtained from Figure 14 by the steady state value RqJA. Example: Dissipating 2.0 watts peak under the following conditions: t1 = 1.0 ms, t2 = 5.0 ms (D = 0.2) Using Figure 14 at a pulse width of 1.0 ms and D = 0.2, the reading of r(t) is 0.22. The peak rise in junction temperature is therefore DT = r(t) x P(pk) x RqJA = 0.22 x 2.0 x 200 = 88°C. For more information, see AN−569. ICBO AND ICEX @ VBE(off) = 3.0 V -4 0 -2 0 0 + 20 + 40 + 60 + 80 + 100 + 120 + 140 + 160 TJ, JUNCTION TEMPERATURE (°C) Figure 15. Typical Collector Leakage Current http://onsemi.com 5 BCW70LT1G PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AN D SEE VIEW C 3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 318−01 THRU −07 AND −09 OBSOLETE, NEW STANDARD 318−08. MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.13 0.18 2.90 3.04 1.30 1.40 1.90 2.04 0.20 0.30 0.54 0.69 2.40 2.64 INCHES NOM 0.040 0.002 0.018 0.005 0.114 0.051 0.075 0.008 0.021 0.094 E 1 2 HE c e b q 0.25 A A1 L L1 VIEW C DIM A A1 b c D E e L L1 HE MIN 0.89 0.01 0.37 0.09 2.80 1.20 1.78 0.10 0.35 2.10 MIN 0.035 0.001 0.015 0.003 0.110 0.047 0.070 0.004 0.014 0.083 MAX 0.044 0.004 0.020 0.007 0.120 0.055 0.081 0.012 0.029 0.104 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 SCALE 10:1 0.8 0.031 mm inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 6 BCW70LT1/D
BCW70LT1G 价格&库存

很抱歉,暂时无法提供与“BCW70LT1G”相匹配的价格&库存,您可以联系我们找货

免费人工找货