Surface Mount General
Purpose Rectifiers
S1MFL Series, NRVS1MFL
Series
S1AFL, S1BFL, S1DFL, S1GFL, S1JFL, S1MFL,
NRVS1AFL, NRVS1BFL, NRVS1DFL, NRVS1GFL,
NRVS1JFL, NRVS1MFL
www.onsemi.com
1
Cathode
Features
•
•
•
•
•
•
Ultra Thin Profile − Maximum Height of 1.08 mm
UL Flammability 94V−0 Classification
MSL 1
Green Mold Compound
NRV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free and RoHS Compliant
2
Anode
General−Purpose Rectifier
SOD−123F
CASE 425AD
MARKING DIAGRAM
&Y
&Z*&G
Band Indicates Cathode
&Y
&Z
*
&G
= Binary Calendar Year Coding Scheme
= Assembly Plant Code
= Specific Device Code
1A, 1B, 1D, 1G, 1J, 1M
= Single Digit Weekly Data Code
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2017
January, 2021 − Rev. 6
1
Publication Order Number:
S1MFL/D
S1MFL Series, NRVS1MFL Series
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Value
Rating
Symbol
S1AFL
S1BFL
S1DFL
S1GFL
S1JFL
S1MFL
Unit
VRRM
Recurrent Peak Reverse Voltage
50
100
200
400
600
1000
V
VRMS
RMS Voltage
35
70
140
280
420
700
V
VDC
DC Blocking Voltage
50
100
200
400
600
1000
V
IF(AV)
Average Forward Current (Note 1)
1
A
IFSM
Peak One Cycle Forward Current (Non−Repetitive)
at 60Hz
30
A
−55 to +175
°C
TJ, TSTG
Operating and Storage Temperature Range
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Pulse test: 300 ms pulse width, 1 % duty cycle.
THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Note 2)
Symbol
Characteristic
Value
Unit
YJL
Typical Thermal Characteristics, Junction−to−Lead (Note 3)
25
°C/W
RqJA
Typical Thermal Resistance, Junction−to−Ambient
140
°C/W
2. Per JESD51−3 recommended thermal test board. Device mounted on FR−4 PCB, board size = 76.2 mm x 114.3 mm.
3. Thermocouple soldered at cathode lead.
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Symbol
Parameter
Conditions
VF
Forward Voltage
IF = 1 A
IR
Reverse Current
VR = VDC
Min
Typ
Max
Unit
−
−
1.1
V
TA = 25°C
−
−
1
mA
TA = 125°C
−
−
50
Trr
Reverse Recovery Time
IF = 0.5 A, IR = 1 A, Irr = 0.25 A
−
1.304
2
ms
CJ
Junction Capacitance
VR = 4 V, f = 1.0 MHz
−
4
−
pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
ORDERING INFORMATION
Part Number
Top Mark
Package
Shipping†
S1AFL, NRVS1AFL*
1A
SOD−123F
(Pb−Free/Halogen Free)
3000 / Tape & Reel
S1BFL, NRVS1BFL*
1B
SOD−123F
(Pb−Free/Halogen Free)
3000 / Tape & Reel
S1DFL, NRVS1DFL*
1D
SOD−123F
(Pb−Free/Halogen Free)
3000 / Tape & Reel
S1GFL, NRVS1GFL*
1G
SOD−123F
(Pb−Free/Halogen Free)
3000 / Tape & Reel
S1JFL, NRVS1JFL*
1J
SOD−123F
(Pb−Free/Halogen Free)
3000 / Tape & Reel
S1MFL, NRVS1MFL*
1M
SOD−123F
(Pb−Free/Halogen Free)
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP
Capable.
www.onsemi.com
2
S1MFL Series, NRVS1MFL Series
TYPICAL PERFORMANCE CHARACTERISTICS
Instantaneous Forward Current (A)
IF, Average Rectified Forward
Current (A)
1.2
1
0.8
0.6
0.4
0.2
0
25
50
75
100
125
150
175
40
20
10
4.0
2.0
1.0
0.4
0.2
0.1
0.4
0.6
0.8
1.2
1.4
1.6
1.8
Instantaneous Forward Voltage (V)
Figure 1. Forward Current Derating Curve
Figure 2. Typical Instantaneous Forward
Characteristics
100
100
TJ = 25°C
50
10
TJ = 125°C
1
TJ = 75°C
0.1
20
10
5
TJ = 25°C
0.01
2
0.001
0
40
20
60
80
1
100
0.1
1.0
Percent of Peak Reverse Voltage (%)
Figure 3. Typical Reverse Characteristics
10
100
Reverse Voltage (V)
1000
Figure 4. Typical Junction Capacitance
10
40
35
IF, Forward Current (A)
Peak Forward Surge Current (A)
1.0
Lead Temperature (5C)
Capacitance (pF)
Instantaneous Reverse Current (mA)
0
100
30
25
20
15
10
TA = 150°C
1
TA = 125°C
0.1
TA = 75°C
TA = 100°C
0.01
TA = 25°C
5
0
1
2
5
10
20
50
1E−3
0.2
100
0.4
0.6
0.8
1.0
1.2
No. of Cycle at 60 Hz
VF, Forward Voltage (V)
Figure 5. Maximum Non−Repetitive Surge
Current
Figure 6. Typical Forward Characteristics
www.onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOD−123FL
CASE 425AD
ISSUE A
DATE 04 AUG 2017
SCALE 4:1
DOCUMENT NUMBER:
DESCRIPTION:
98AON13725G
SOD−123FL
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative