UTGX6JC124SSCR

UTGX6JC-----PSCR 8 7 Operating temperature: -40 C up to 105C Insulation resistance: 5000 min M Corrosion salt spray: 500 hours Durability: 500 matings and unmatings 6 Sealing conditions: SEE TABLE NOTA: 1- Contact to be ordered separately for version UTGX0----- : refer to corresponding catalogue. 2- Insert arrangement refer to: 5 C008-UTS1-A(female insulator) C007-UTS1-A (male insulator) 3- This part shall be used at the place of the standard seal to accomodate with different cable 4- Plug, backshell and the reducing seal are delivered as a kit. The backshell already includes the standard seal. A-A COUPE Sealing in MATED conditions with COUNTERPART: -IP68 1 bar during 1 week: immersion under 10 m of water. (IEC 60529) -IP69K : exposure to high pressure water of cleaning equipement (DIN 40050) BACKSHELL BODY THREAD BACKSHELL SEAL BACKSHELL NUT INSERT CountryJurisdiction & Control List FR NOT LISTED A MAX SHELL PLUG MATING SEAL 3 O'RING P/N : CROSS REF TABLE BASIC SERIES SHELL TYPE B min 2 MAX A min STANDARD B REDUCING SEAL (NOTA.3) C HEXAGON backshell nut MAX 10% (g.) D Tightening torque (N.m) E1 E2 MASS 12 29.7 66.7 5 / 12 3 / 9 24 2 15.1 22.8 40 14 34.6 71.5 7 / 14 5 / 12 26 2.5 18.95 26.7 55 Torquing screw advised : 20 N.cm F E D 6 12 14 INSERT ARRANGEMENT See NOTA 2 10/05/19 ISS DATE TITLE Scale 3/2 for example 3 SHELL SIZE A * P/N Plug JC SCREW TERMINATION TYPE OF CONTACTS P: MALE S: FEMALE New drawing 25253D Latest modification - by: LANDAIS.PE Date: 10/05/19 CUSTOMER DRAWING MOD N FORMAT C A2 2 PLUG T6 WITH BACKSHELL JC AND SCREW CONTACT - SIZE 12 & 14 UTGX CONNECTOR Dimensions in mm General linear Tolerances: 0.2 NPRDS / PROJECT GBB This document is the property of SOURIAU www.esterline-connection-technologies.com It must not be reproduced or communicated without permission 1 G UTGX 6 JC 14 7 P SCR RACCORD Designed by: Wire strip length = 5,8 mm H 4 SOURIAU shall not be liable for any non-conformity or damage due to a use of the Products which does not comply with the Specifications issued by either of the Parties or by a third party (professional recommendation, technical notice.) Cable section acceptance: 0,5 mm2 to 2,5 mm2 4 COMMON QUOTES FOR ALL VERSION COUPLING RING CAPACITY C CONDITIONS SHELL : PA UL94 V0, UL746C F1 Black color COUPLING RING: PA + Nickel plated brass BACKSHELLS : PA UL94 V0 F1 Black color BACKSHELL Seal : CR INSERT : PA UL94 V0, UL746C F1 O'RING : NITRIL MATING SEAL : SILICON CONTACT SPRING: copper alloy CONTACT BODY : brass, gold and nickel plated SCREW : stainless steel PERFORMANCE CHARACTERISTICS : WIRING AREA (between insert and backshell seal) E2 5 SEALING A-A HEXAGON D (See tightening torque in table) 6 UTGX6JC-----SSCR 7 - DETAIL CONTACT SHELL SIZE A MATERIAL : WIRING AREA (between insert and backshell seal) E1 COUPE B C D E F G H 8 A.3; Validé SIDE VIEW FOR EACH VERSION SOURIAU DRG N° UTGX-0006A-C B SHEET 1 / 2 A 1 A B C D E F G H 5% -- g 8 8 7 7 6 6 5 5 4 4 3 A.3; Validé MASS 3 P/N : 2 A ISS DATE Designed by: TITLE Scale 3/2 Latest modification - by: Date: 1 H G F E SOURIAU shall not be liable for any non-conformity or damage due to a use of the Products which does not comply with the Specifications issued by either of the Parties or by a third party (professional recommendation, technical notice.) D C FORMAT A2 2 PLUG T6 WITH BACKSHELL JC AND SCREW CONTACT - SIZE 12 & 14 Dimensions in mm General linear Tolerances: -- www.souriau.com CountryJurisdiction& Control List FR NOT LISTED CUSTOMER DRAWING MOD N SOURIAU DRG N° UTGX-0006A-C B NPRDS / PROJECT GBB This document is the property of SOURIAU It must not be reproduced or communicated without permission SHEET 2 / 2 A 1