Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
TPS92663-Q1
SLUSD34 – JULY 2018
TPS92663-Q1 High-Brightness LED Matrix Manager for Automotive Headlight Systems
1 Features
•
1
•
•
•
•
•
•
•
•
The device includes two sub-strings of three seriesconnected integrated switches for bypassing
individual LEDs. The individual sub-strings allow the
device to accept either single or multiple current
sources. It also allows a parallel connection of two
switches to bypass high-current LEDs.
AEC-Q100 Qualified for Automotive Applications
– Device Temperature Grade 1: –40°C to 125°C,
TA
– Device HBM Classification Level: H1C
– Device CDM Classification Level: C5
Input Voltage Range: 4.5 V to 60 V
Six Integrated Bypass Switches
– Two Sub-Strings of Three Series Switches
– 20 V (Maximum) Across Switch
– 62 V (Maximum) Switch to GND
Multi-Drop UART Communication Interface
– Up to 16 Addressable Devices
– Integrates on same bus with the TPS92662
Compatible with CAN Physical Layer
– Minimum Number of Wires in Cable Harness
8-bit ADC with Two MUX Inputs
Crystal Oscillator Driver
Programmable 10-bit PWM Dimming
– Individual Phase Shift and Pulse Width
– Device-to-device Synchronization
LED Open and Short Detection and Protection
A master microcontroller may be used to control and
manage the TPS92663-Q1 devices via a multi-drop
universal asynchronous receiver transmitter (UART)
serial interface. The serial interface supports the use
of CAN transceivers for a more robust physical layer.
An application can use the TPS92663-Q1 device and
the TPS92662-Q1 device on the same bus.
An on-device, 8 bit ADC with two multiplexed inputs
can be used for system temperature compensation
and used to measure a binning value which allows for
LED binning and coding.
The internal charge pump rail supplies the gate drive
voltage for the LED bypass switches. The low onresistance (RDS(on)) of the bypass switch minimizes
conduction loss and power dissipation.
The phase shift and pulse width for each individual
LED in the string are programmable. The device uses
an internal register to adjust the PWM frequency.
Multiple devices can be synchronized. The switch
transitions during PWM dimming operation have a
programmable slew rate to mitigate EMI concerns.
2 Applications
•
•
•
The device features open LED protection with
programmable threshold. The serial interface reports
open LED and short LED faults.
Automotive headlight systems
High-Brightness LED Matrix Systems
ADB or Glare-Free High Beam
Device Information(1)
PART NUMBER
3 Description
TPS92663-Q1
The TPS92663-Q1 LED matrix manager device
enables fully dynamic adaptive lighting solutions by
providing individual pixel-level LED control.
PACKAGE
PWP (24)
BODY SIZE (NOM)
7.70 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Application
VBAT
Boost
Buck
VIN
XTALI
CPPx
TPS92663
XTALO
MCU
BIN
ADCx
UART
ECU
CAN
CAN
RX
TX
LEDx
VDD
GND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
TPS92663-Q1
SLUSD34 – JULY 2018
www.ti.com
Table of Contents
1
2
3
4
5
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Device and Documentation Support....................
5.2
5.3
5.4
5.5
1
1
1
2
3
6
5.1 Receiving Notification of Documentation Updates.... 3
Community Resources..............................................
Trademarks ...............................................................
Electrostatic Discharge Caution ................................
Glossary ....................................................................
3
3
3
3
Mechanical, Packaging, and Orderable
Information ............................................................. 4
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
2
DATE
REVISION
NOTES
July 2018
*
Initial release.
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TPS92663-Q1
TPS92663-Q1
www.ti.com
SLUSD34 – JULY 2018
5 Device and Documentation Support
5.1 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper
right corner, click on Alert me to register and receive a weekly digest of any product information that has
changed. For change details, review the revision history included in any revised document.
5.2 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
5.3 Trademarks
E2E is a trademark of Texas Instruments.
5.4 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
5.5 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TPS92663-Q1
3
TPS92663-Q1
SLUSD34 – JULY 2018
www.ti.com
6 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
4
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Product Folder Links: TPS92663-Q1
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
TPS92663QPWPRQ1
ACTIVE
HTSSOP
PWP
24
2000
RoHS & Green
NIPDAU
Level-3-260C-168 HR
-40 to 125
TPS92663Q
TPS92663QPWPTQ1
ACTIVE
HTSSOP
PWP
24
250
RoHS & Green
NIPDAU
Level-3-260C-168 HR
-40 to 125
TPS92663Q
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“TPS92663QPWPRQ1”相匹配的价格&库存,您可以联系我们找货
免费人工找货