MW5IC970GNBR1

Freescale Semiconductor Technical Data Document Number: MW5IC970N Rev. 3, 1/2010 RF LDMOS Wideband 2-Stage Power Amplifiers Designed for broadband commercial and industrial applications with frequencies from 132 MHz to 960 MHz. The high gain and broadband performance of these devices make them ideal for large- signal, common- source amplifier applications in 28 volt base station equipment. These devices have a 2-stage design with off-chip matching for the input, interstage and output networks to cover the desired frequency band. • Typical Performance: 800 MHz, 28 Volts, IDQ1 = 80 mA, IDQ2 = 650 mA, Pout = 70 Watts PEP Power Gain — 30 dB Drain Efficiency — 48% • Capable of Handling 10:1 VSWR, @ 28 Vdc, 850 MHz, 70 Watts CW Output Power Features • Characterized with Series Equivalent Large-Signal Impedance Parameters • Integrated Quiescent Current Temperature Compensation with Enable/Disable Function • On-Chip Current Mirror gm Reference FET for Self Biasing Application (1) • Integrated ESD Protection • 200°C Capable Plastic Package • RoHS Compliant • In Tape and Reel. R1 Suffix = 500 Units per 44 mm, 13 inch Reel. MW5IC970NBR1 MW5IC970GNBR1 800-900 MHz, 70 W, 28 V RF LDMOS WIDEBAND 2-ST AGE POWER AMPLIFIERS CASE 1329-09 TO-272 WB-16 PLASTIC MW5IC970NBR1 CASE 1329A-04 TO-272 WB-16 GULL PLASTIC MW5IC970GNBR1 VRD2 VRG2/VGS2 Quiescent Current Temperature Compensation (1) VRG1/VGS1 GND VRD2 VRG2/VGS2 VRG1/VGS1 RFin1 GND VD2/RFout2 VRD1 VD1/RFout1 VD1/RFout1 RFin2 GND 1 2 3 4 5 6 7 8 9 10 11 16 15 GND NC 14 VD2/ RFout2 RFin1 VRD1 VD1/RFout1 VD1/RFout1 RFin2 13 12 NC GND (Top View) Note: Exposed backside flag is source terminal for transistors. Figure 1. Functional Block Diagram Figure 2. Pin Connections 1. Refer to AN1977, Quiescent Current Thermal Tracking Circuit in the RF Integrated Circuit Family and to AN1987, Quiescent Current Control for the RF Integrated Circuit Device Family. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - AN1977 or AN1987. © Freescale Semiconductor, Inc., 2006, 2008, 2010. All rights reserved. MW5IC970NBR1 MW5IC970GNBR1 1 RF Device Data Freescale Semiconductor Table 1. Maximum Ratings Rating Drain-Source Voltage Gate-Source Voltage Storage Temperature Range Case Operating Temperature Operating Junction Temperature Symbol VDSS VGS Tstg TC TJ Value -0.5, +65 -0.5, +15 -65 to +150 150 200 Unit Vdc Vdc °C °C °C Table 2. Thermal Characteristics Characteristic Thermal Resistance, Junction to Case Final Application (Pout = 70 W CW) EDGE Application (Pout = 35 W CW) Stage 1, 28 Vdc, IDQ = 80 mA Stage 2, 28 Vdc, IDQ = 650 mA Stage 1, 28 Vdc, IDQ = 80 mA Stage 2, 28 Vdc, IDQ = 650 mA Symbol RθJC 5.2 0.8 5.3 0.8 Value (1) Unit °C/W Table 3. ESD Protection Characteristics Test Methodology Human Body Model (per JESD22-A114) Machine Model (per EIA/JESD22-A115) Charge Device Model (per JESD22-C101) Class 1A (Minimum) A (Minimum) IV (Minimum) Table 4. Moisture Sensitivity Level Test Methodology Per JESD22-A113, IPC/JEDEC J-STD-020 Rating 3 Package Peak Temperature 260 Unit °C Table 5. Electrical Characteristics (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Functional Tests (In Freescale Test Fixture, 50 ohm system) VDD = 28.5 Vdc, IDQ1 = 80 mA, IDQ2 = 650 mA, Pout = 70 W PEP, f1 = 870.0 MHz, f2 = 870.1 MHz Power Gain Drain Efficiency Input Return Loss Intermodulation Distortion Gps ηD IRL IMD 26.5 40 — — 30 48 -12 -33 34.5 — -10 -28 dB % dB dBc Typical 800/900 MHz Performances (In Freescale 800/900 MHz Reference Fixture, 50 ohm system) VDD = 28 Vdc, IDQ1 = 80 mA, IDQ2 = 650 mA, 740-870 MHz, 870-960 MHz Gain Flatness in 30 MHz Bandwidth @ Pout = 70 W CW Gain Flatness in 30 MHz Instantaneous Bandwidth @ Pout = 70 W CW Delay @ Pout = 70 W CW Including Output Matching Part-to-Part Phase Variation @ Pout = 70 W CW GF GF Delay ΔΦ — — — — 2 0.2 4.5 ±15 — — — — dB dB ns ° 1. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - AN1955. MW5IC970NBR1 MW5IC970GNBR1 2 RF Device Data Freescale Semiconductor VBIAS VD2 R6 F1 R4 R5 R3 R7 R2 C18 C16 R1 RF INPUT C15 Z1 C1 Z2 C2 C17 VG2R2 VG1R1 Z3 1 2 3 4 5 Z5 6 7 8 C5 Z4 11 C3 12 9 10 NC 13 C14 Z11 14 C6 C11 C13 Z10 Quiescent Current Temperature Compensation 16 NC 15 C8 C9 R8 Z6 C7 Z7 C10 Z8 C12 Z9 RF OUTPUT C4 F2 VD1 Z1 Z2 Z3 Z4 Z5 Z6 0.485″ x 0.066″ Microstrip 0.270″ x 0.040″ Microstrip 0.068″ x 0.020″ Microstrip 0.950″ x 0.040″ Microstrip 0.131″ x 0.233″ Microstrip 0.797″ x 0.050″ Microstrip Z7 Z8 Z9 Z10 Z11 PCB 0.040″ x 0.233″ Microstrip 0.450″ x 0.120″ Microstrip 0.100″ x 0.066″ Microstrip 1.000″ x 0.040″ Microstrip 0.148″ x 0.040″ Microstrip Rogers 4350B, 0.030″, εr = 3.5 Figure 3. MW5IC970NBR1(GNBR1) Test Circuit Schematic Table 6. MW5IC970NBR1(GNBR1) Test Circuit Component Designations and Values Part C1, C10, C11 C2 C3, C8, C14, C15, C17 C4, C9 C5 C6, C7 C12 C13 C16, C18, C19, C20 F1 F2 R1, R7 R2, R5 R3, R4, R8 R6 Description 3.9 pF Chip Capacitors 56 pF Chip Capacitor 39 pF Chip Capacitors 10 μF Chip Capacitors 24 pF Chip Capacitor 15 pF Chip Capacitors 4.7 pF Chip Capacitor 0.4 pF Chip Capacitor 0.015 μF Chip Capacitors 5A Surface Mount Fuse 1A Surface Mount Fuse 681 Ω, 1/8 W Chip Resistors 4.75 kΩ, 1/8 W Chip Resistors 1.21 kΩ, 1/8 W Chip Resistors 267 Ω, 1/8 W Chip Resistor Part Number ATC600S3R9BT250T ATC600S560JT250T GRM40001C0G390J050BD ECJ4YF1H106Z ATC600F240JT250T ATC600F150JT250T ATC600F4R7BT250T ATC600F0R4BT250T GRM400X7R153J050BD 1FT5A 1FT1A CRCW08056810FKEA CRCW08054751FKEA CRCW08051211FKEA CRCW08052670FKEA ATC ATC Murata Panasonic ATC ATC ATC ATC Murata Little Fuse Little Fuse Vishay Vishay Vishay Vishay Manufacturer MW5IC970NBR1 MW5IC970GNBR1 RF Device Data Freescale Semiconductor 3 VD2 F1 VG2 C9 R6 VG1 C8 R8 R4 R5 R3 R2 R1 C16 C15 C7 C2 C R7 C18 C17 C11 C13 C10 C6 C12 C1 C5 C14 C3 MW5IC970 VD1 C4 Rev. 1 F2 Figure 4. MW5IC970NBR1(GNBR1) Test Circuit Component Layout MW5IC970NBR1 MW5IC970GNBR1 4 RF Device Data Freescale Semiconductor TYPICAL CHARACTERISTICS 60 PAE, POWER ADDED EFFICIENCY (%) Gps, POWER GAIN (dB) PAE 40 Gps 20 VDD = 28.5 Vdc, Pout = 35 W (Avg.) IDQ1 = 80 mA, IDQ2 = 650 mA 100 kHz Tone Spacing IRL -2 0 IMD -40 800 820 840 860 880 900 920 940 -40 960 -20 40 60 IMD, INTERMODULATION DISTORTION (dBc) IRL, INPUT RETURN LOSS (dB) 20 0 0 f, FREQUENCY (MHz) Figure 5. Two-T one Wideband Performance @ Pout = 35 Watts (Avg.) 32 IDQ2 = 975 mA 31 Gps, POWER GAIN (dB) 812 mA 650 mA 30 488 mA 29 VDD = 28.5 Vdc, IDQ1 = 80 mA f1 = 870 MHz, f2 = 870.1 MHz Two-Tone Measurements 100 kHz Tone Spacing 10 Pout, OUTPUT POWER (WATTS) PEP 100 200 -1 0 IMD, INTERMODULATION DISTORTION (dBc) -2 0 -3 0 -4 0 -5 0 5th Order -6 0 -70 1 10 Pout, OUTPUT POWER (WATTS) PEP 100 300 7th Order VDD = 28.5 Vdc IDQ1 = 80 mA, IDQ2 = 650 mA f1 = 870 MHz, f2 = 870.1 MHz Two-Tone Measurements 100 kHz Tone Spacing 3rd Order 28 325 mA 27 1 Figure 6. Two-T one Power Gain versus Output Power -2 0 -2 5 -3 0 3rd Order -3 5 -4 0 -4 5 -5 0 -55 0.1 1 10 100 200 TWO-T ONE SPACING (MHz) 5th Order 7th Order VDD = 28.5 Vdc, Pout = 35 W (PEP) IDQ1 = 80 mA, IDQ2 = 650 mA Two-Tone Measurements (f1 + f2)/2 = Center Frequency of 870 MHz 34 32 Gps, POWER GAIN (dB) 30 28 26 24 22 20 0.1 Figure 7. Intermodulation Distortion Products versus Output Power 70 25_C 60 85_C 50 40 85_C 30 20 PAE 10 0 1000 PAE, POWER ADDED EFFICIENCY (%) VDD = 28.5 Vdc, IDQ1 = 80 mA IDQ2 = 650 mA, f = 870 MHz Gps TC = 25_C -30 _C -30 _C IMD, INTERMODULATION DISTORTION (dBc) 1 10 100 Pout, OUTPUT POWER (WATTS) CW Figure 8. Intermodulation Distortion Products versus Tone Spacing Figure 9. Power Gain and Power Added Efficiency versus CW Output Power MW5IC970NBR1 MW5IC970GNBR1 RF Device Data Freescale Semiconductor 5 TYPICAL CHARACTERISTICS 32 31 Gps, POWER GAIN (dB) IDQ1 = 80 mA IDQ2 = 650 mA f = 870 MHz 30 29 16 V 28 24 V 27 0 VDD = 12 V 20 40 20 V 60 80 28.5 V 100 120 140 32 V Pout, OUTPUT POWER (WATTS) CW Figure 10. Power Gain versus Output Power MW5IC970NBR1 MW5IC970GNBR1 6 RF Device Data Freescale Semiconductor PACKAGE DIMENSIONS MW5IC970NBR1 MW5IC970GNBR1 RF Device Data Freescale Semiconductor 7 MW5IC970NBR1 MW5IC970GNBR1 8 RF Device Data Freescale Semiconductor MW5IC970NBR1 MW5IC970GNBR1 RF Device Data Freescale Semiconductor 9 MW5IC970NBR1 MW5IC970GNBR1 10 RF Device Data Freescale Semiconductor MW5IC970NBR1 MW5IC970GNBR1 RF Device Data Freescale Semiconductor 11 MW5IC970NBR1 MW5IC970GNBR1 12 RF Device Data Freescale Semiconductor PRODUCT DOCUMENTATION Refer to the following documents to aid your design process. Application Notes • AN1907: Solder Reflow Attach Method for High Power RF Devices in Plastic Packages • AN1955: Thermal Measurement Methodology of RF Power Amplifiers • AN1977: Quiescent Current Thermal Tracking Circuit in the RF Integrated Circuit Family • AN1987: Quiescent Current Control for the RF Integrated Circuit Device Family • AN3263: Bolt Down Mounting Method for High Power RF Transistors and RFICs in Over-Molded Plastic Packages • AN3789: Clamping of High Power RF Transistors and RFICs in Over-Molded Plastic Packages Engineering Bulletins • EB212: Using Data Sheet Impedances for RF LDMOS Devices REVISION HISTORY The following table summarizes revisions to this document. Revision 2 Date Apr. 2008 Description • Document Number changed from MW5IC970NBR1 to MW5IC970N with the addition of the MW5IC970GNBR1 part number. Revision history sequencing maintained from first release of data sheet, p. 1 • Added Case Operating Temperature limit to the Maximum Ratings table and set limit to 150°C, p. 2 • Updated Part Numbers in Table 6, Component Designations and Values, to RoHS compliant part numbers, p. 3 • Replaced Case Outline 1329-09, Issue L, with 1329-09, Issue M, p. 1, 7-9. Added pin numbers 1 through 17. • Added Case Outline 1329A-04, Issue F, p. 1, 10-12 • Added Product Documentation and Revision History, p. 13 3 Jan. 2010 • Changed Storage Temperature Range in Max Ratings table from -65 to +200 to -65 to +150 for standardization across products, p. 2 MW5IC970NBR1 MW5IC970GNBR1 RF Device Data Freescale Semiconductor 13 How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516 2100 East Elliot Road Tempe, Arizona 85284 1-800-521-6274 or +1-480-768-2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center 1-800-441-2447 or +1-303-675-2140 Fax: +1-303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer's technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006, 2008, 2010. All rights reserved. MW5IC970NBR1 MW5IC970GNBR1 Document Number: MW5IC970N 1Rev. 3, 1/2010 4 RF Device Data Freescale Semiconductor