LRGB9553-S17-TR1

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL Pb Lead-Free Parts LRGB9553/S17/TR1 DATA SHEET DOC. NO REV. DATE : : QW0905-LRGB9553/S17/TR1 A : 12 - Oct. - 2009 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S17/TR1 Page 1/9 Package Dimensions 3.5 3.2 0.7±0.05 0.7±0.05 1.95 2.6 3 4 B G R 2 1 0.7±0.05 2.8 0.7±0.05 0.6 1.95 2.2 1.05 1.5 0.9 0.9 Common Anode 4 + RGB Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. 1 2 3 1.Cathode Orange 2.Cathode Green 3.Cathode Blue 4.Common Anode Carrier Type Dimensions 4.0±0.2 2.0 1.55 0.23 1.75 5.5±0.2 12.0±0.3 9.3 4.06 4.0±0.5 3.12 2.24 Note : The tolerances unless mentioned is ±0.2mm, Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S17/TR1 Page 2/9 Reel Dimensions 16.0±1.0 ψ178±2.0 14.2±1.0 74.0±1.5 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S17/TR1 Page 3/9 Absolute Maximum Ratings at Ta=25 ℃ Ratings Parameter Symbol E Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge Operating Temperature Storage Temperature IF IFP PD Ir ESD Topr Tstg 30 120 100 10 ---G 30 120 100 10 ----20 ~ +80 -30 ~ +100 SBI 30 70 120 50 500 mA mA mW UNIT μA V ℃ ℃ Static Electricity or power surge will the Use of anti-electrosatic * glove is recommended when handingdamageLED.LED.devices, a conductive wrist band or must be properly these All equipment and machinery grounded. Typical Electrical & Optical Characteristics (Ta=25 ℃) Peak Dominant wave wave length length λPnm λDnm Spectral halfwidth △λnm PART NO MATERIAL COLOR Emitted Lens Forward voltage @20mA(V) Luminous Viewing intensity angle @20mA(mcd) 2θ 1/2 (deg) Min. Typ. Max. Min. 635 ------465 45 30 65 1.7 ---- 2.6 8.0 Typ. 12.5 20 12.5 120 120 120 GaAsP/GaP Orange LRGB9553/S17/TR1 GaP Green Water Clear 565 430 1.7 ---- 2.6 12.5 ---- 3.8 4.7 8.0 InGaN/SiC Blue Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ± 15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S17/TR1 Page 4/9 Typical Electro-Optical Characteristics Curve E CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 1000 Forward Current(mA) 100 Relative Intensity Normalize @20mA 1.0 2.0 3.0 4.0 5.0 2.5 2.0 1.5 1.0 0.5 0.0 1.0 10 100 1000 10 1.0 0.1 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Relative Intensity@20mA Normalize @25 ℃ Forward Voltage@20mA Normalize @25 ℃ 1.2 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Fig.6 Directive Radiation Relative Intensity@20mA 1.0 0° -30 ° 30 ° 0.5 -60° 60° 0.0 550 600 650 700 750 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S17/TR1 Page 5/9 Typical Electro-Optical Characteristics Curve G CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.5 1000 Forward Current(mA) 100 Relative Intensity Normalize @20mA 2.0 3.0 4.0 5.0 3.0 2.5 2.0 1.5 1.0 0.5 0.0 10 1.0 0.1 1.0 1.0 10 100 1000 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Relative Intensity@20mA Normalize @25 ℃ Forward Voltage@20mA Normalize @25℃ 1.2 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Fig.6 Directive Radiation 0° Relative Intensity@20mA 1.0 -30 ° 30 ° 0.5 -60° 60° 0.0 500 550 600 650 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S17/TR1 Page 6/9 Typical Electro-Optical Characteristics Curve SBI CHIP Fig.1 Forward current vs. Forward Voltage Forward Current(mA DC) 30 25 20 15 10 5 0 1 2 3 4 5 Fig.2 Relative Intensity vs. Wavelength 1.0 Relative Intensity(%) 0.5 0 380 430 480 530 580 630 680 Forward Voltage(V) Wavelength (nm) Fig.3 Relative Intensity vs. Forward Current 125 Relative Intensity(%) Relative Intensity 0 5 10 15 20 25 30 35 40 45 Forward Current (mA DC) 100 75 50 25 0 Fig.4 Relative Intensity vs. Lead Temperature 10 1 0 0 25 50 75 100 Lead Temperature ( ℃) Fig.5 Forward Current vs. Ambient Temperature Forward Current (mA DC) 40 30 20 10 0 Fig.6 Directive Radiation 0° -30° 30° -60° 60 ° 0 25 50 75 100 100% 75% 50% 25% 0 25% 50% 75% 100% Ambient Temperature ( ℃) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S17/TR1 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. Page 7/9 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150℃ 120 ~ 180 sec 3. LEAD Reflow Solder Temp. (℃) 240 Rising +5 ℃/sec Cooling -5℃/sec 150 120 Preheat 60 ~ 120 sec 5sec Time 4. PB-Free Reflow Solder 1~5° C/sec 260° C MaX. 10sec.Max Preheat 180~200° C 1~5° C/sec Above 220° C 60 sec.Max. 120 sec.Max. Note: 1.Wave solder and reflow soldering should not be made more than one time. 2.You can just only select one of the soldering conditions as above. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LRGB9553/S17/TR1 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH