SK86L-TP

SK82L THRU SK810L Features High Current Capability Low Forward Voltage For Surface Mount Application Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates Compliant. See Ordering Information) • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 • Halogen Free Available Upon Request By Adding Suffix "-HF" • • • • 8.0 Amp Schottky Rectifier 20 to 100 Volts Maximum Ratings • Operating Junction Temperature Range: -55⁰C to +150⁰C • Storage Temperature Range: -55⁰C to +150⁰C • Typical Thermal Resistance(Note 2) : 50oC/W Junction to Ambient SMC (DO-214AB) • Typical Thermal Resistance(Note 2) : 18oC/W Junction to Lead MCC Part Number Device Marking SK82L SK83L SK835L SK84L SK845L SK86L SK88L SK810L SK82 SK83 SK835 SK84 SK845 SK86 SK88 SK810 Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 20V 30V 35V 40V 45V 60V 80V 100V 14V 21V 24.5V 28V 31.5V 42V 56V 70V G H 20V 30V 35V 40V 45V 60V 80V 100V Cathode Mark A IF(AV) Peak Forward Surge Current IFSM 200A 8.3ms,Half Sine VF 0.65V 0.80V IFM=8.0A; TJ=25⁰C Maximum Instantaneous Forward Voltage SK82L-86L SK88L-810L 8.0A A B C D E F G H DIMENSIONS INCHES MM MIN MAX MIN MAX 0.079 0.103 2.00 2.62 0.108 0.128 2.75 3.25 0.002 0.008 0.051 0.203 0.006 0.012 0.152 0.305 0.030 0.060 0.76 1.52 0.305 0.320 7.75 8.13 0.260 0.280 6.60 7.11 0.220 0.245 5.59 6.22 NOTE Suggested Solder Pad Layout Maximum DC Reverse Current at Rated DC Blocking Voltage IR 0.1mA 10mA TJ=25⁰C; TJ=100⁰C Typical Junction Capacitance CJ 400pF Measured at 1.0MHz, VR=4.0V 4.40mm Note: 1. High Temperature Solder Exemptions Applied, See EU Directive Annex 7a. 2.Mounted on P.C.B. With 0.6" x 0.6" (16 mm x 16 mm) Copper Pad Areas Rev.3-2-06252019 B F DIM TL=95⁰C C E Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current D 1/3 3.30mm 2.50mm MCCSEMI.COM SK82L THRU SK810L Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 225 9 200 8 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 10 7 6 5 4 3 2 150 125 100 75 50 Resistive or Inductive Load 1 0 175 0 25 50 25 75 125 100 0 150 8.3 ms Single Half Sine-Wave 1 Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Instantaneous Forward Characteristics 20 20 10 Instantaneous Forward Current (A) Instantaneous Forward Current (A) 10 TJ=125°C 5 2 1 0.5 TJ=75°C 0.2 0.1 0.05 TJ=25°C 0.02 0.01 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0.5 TJ=75°C 0.2 0.1 TJ=25°C 0.05 1.0 SK88L-810L 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Instantaneous Forward Voltage (V) Instantaneous Forward Voltage (V) Fig. 5 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Reverse Leakage Characteristics 1.0 10000 Instantaneous Reverse Leakage Current (μA) Instantaneous Reverse Leakage Current (μA) 2 0.01 0.0 TJ=125°C 1000 TJ=75°C 100 10 TJ=25°C SK82L-86L 40 60 80 100 1000 TJ=125°C 100 TJ=75°C 10 1 0.1 20 TJ=25°C SK88L-810L 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Percent of Rated Peak Reverse Voltage (%) Rev.3-2-06252019 TJ=125°C 5 0.02 SK82L-86L 10000 1 20 100 10 Lead Temperature (°C) 2/3 MCCSEMI.COM SK82L THRU SK810L Ordering Information Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-06252019 3/3 MCCSEMI.COM