APT50GT60BR

TYPICAL PERFORMANCE CURVES APT50GT60BR_SR(G) 600V APT50GT60BR APT50GT60SR APT50GT60BRG* APT50GT60SRG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. Thunderbolt IGBT® The Thunderblot IGBT® is a new generation of high voltage power IGBTs. Using Non- Punch Through Technology, the Thunderblot IGBT® offers superior ruggedness and ultrafast switching speed. • Low Forward Voltage Drop • Low Tail Current • RBSOA and SCSOA Rated • High Freq. Switching to 100KHz • Ultra Low Leakage Current G C (B) TO -2 47 D3PAK C G E (S) E C G E MAXIMUM RATINGS Symbol VCES VGE I C1 I C2 I CM SSOA PD TJ,TSTG TL Parameter Collector-Emitter Voltage Gate-Emitter Voltage Continuous Collector Current 7 All Ratings: TC = 25°C unless otherwise specified. APT50GT60BR_SR(G) UNIT Volts 600 ±30 @ TC = 25°C 110 52 150 150A @ 600V 446 -55 to 150 300 Watts °C Amps Continuous Collector Current @ TC = 110°C Pulsed Collector Current 1 Switching Safe Operating Area @ TJ = 150°C Total Power Dissipation Operating and Storage Junction Temperature Range Max. Lead Temp. for Soldering: 0.063" from Case for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Symbol V(BR)CES VGE(TH) VCE(ON) Characteristic / Test Conditions Collector-Emitter Breakdown Voltage (VGE = 0V, I C = 2mA) Gate Threshold Voltage (VCE = VGE, I C = 1mA, Tj = 25°C) MIN TYP MAX Units 600 3 1.7 4 2.0 2.2 25 2 5 2.5 Collector-Emitter On Voltage (VGE = 15V, I C = 50A, Tj = 25°C) Collector-Emitter On Voltage (VGE = 15V, I C = 50A, Tj = 125°C) Collector Cut-off Current (VCE = 600V, VGE = 0V, Tj = 25°C) 2 Volts I CES I GES µA nA 6-2008 052-6273 Rev C Collector Cut-off Current (VCE = 600V, VGE = 0V, Tj = 125°C) Gate-Emitter Leakage Current (VGE = ±20V) TBD 120 CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. MicrosemiWebsite-http://www.microsemi.com DYNAMIC CHARACTERISTICS Symbol Cies Coes Cres VGEP Qg Qge Qgc SSOA td(on) tr td(off) tf Eon1 Eon2 Eoff td(on) tr td(off) tf Eon1 Eon2 Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate-to-Emitter Plateau Voltage Total Gate Charge 3 APT50GT60BR_SR(G) Test Conditions Capacitance VGE = 0V, VCE = 25V f = 1 MHz Gate Charge VGE = 15V VCE = 300V I C = 50A TJ = 150°C, R G = 4.3Ω, VGE = 15V, L = 100µH,VCE = 600V Inductive Switching (25°C) VCC = 400V VGE = 15V 4 5 MIN TYP MAX UNIT pF V nC 2660 250 153 7.5 240 20 110 150 14 32 240 36 995 1110 1070 14 32 270 95 1035 1655 1505 µJ ns ns A Gate-Emitter Charge Gate-Collector ("Miller ") Charge Switching Safe Operating Area Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy Turn-off Switching Energy 44 55 RG = 4.3Ω TJ = +25°C I C = 50A Turn-on Switching Energy (Diode) 6 µJ Inductive Switching (125°C) VCC = 400V VGE = 15V RG = 4.3Ω TJ = +125°C I C = 50A Turn-on Switching Energy (Diode) 6 THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC RθJC WT Characteristic Junction to Case (IGBT) Junction to Case (DIODE) Package Weight MIN TYP MAX UNIT °C/W gm .28 N/A 5.9 1 Repetitive Rating: Pulse width limited by maximum junction temperature. 2 For Combi devices, Ices includes both IGBT and FRED leakages 3 See MIL-STD-750 Method 3471. 4 Eon1 is the clamped inductive turn-on energy of the IGBT only, without the effect of a commutating diode reverse recovery current adding to the IGBT turn-on loss. Tested in inductive switching test circuit shown in figure 21, but with a Silicon Carbide diode. 5 Eon2 is the clamped inductive turn-on energy that includes a commutating diode reverse recovery current in the IGBT turn-on switching loss. (See Figures 21, 22.) 6 Eoff is the clamped inductive turn-off energy measured in accordance with JEDEC standard JESD24-1. (See Figures 21, 23.) 7 Continuous current limited by package lead temperature. Microsemi reserves the right to change, without notice, the specifications and information contained herein. 052-6273 Rev C 6-2008 TYPICAL PERFORMANCE CURVES 160 140 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) 120 100 80 60 40 10 0 0 1 2 3 4 5 VCE, COLLECTER-TO-EMITTER VOLTAGE (V) 250µs PULSE TEST