Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FGA50N100BNTD
1000 V NPT Trench IGBT
General Description
Features
Using Fairchild's proprietary trench design and advanced
NPT technology, the 1000V NPT IGBT offers superior
conduction and switching performances, high avalanche
ruggedness and easy parallel operation. This device offers
the optimum performance for hard switching application
such as UPS, welder applications.
•
•
•
•
High Speed Switching
Low Saturation Voltage : VCE(sat) = 2.5 V @ IC = 60 A
High Input Impedance
Built-in Fast Recovery Diode
Application
UPS, Welder, Induction Heating, Microwave Oven
C
G
TO-3P
G C E
Absolute Maximum Ratings
Symbol
VCES
VGES
IC
ICM (1)
IF
PD
TJ
Tstg
TL
E
TC = 25C unless otherwise noted
Description
Collector-Emitter Voltage
Gate-Emitter Voltage
Collector Current
Collector Current
Pulsed Collector Current
Diode Continuous Forward Current
Diode Continuous Forward Current
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction Temperature
Storage Temperature Range
Maximum Lead Temp. for soldering
Purposes, 1/8” from case for 5 seconds
@ TC = 25C
@ TC = 100C
@ TC = 25C
@ TC = 100C
@ TC = 25C
@ TC = 100C
Ratings
1000
25
50
35
100
30
15
156
63
-55 to +150
-55 to +150
Unit
V
V
A
A
A
A
A
W
W
C
C
300
C
Notes :
(1) Repetitive rating : Pulse width limited by max. junction temperature
Thermal Characteristics
Symbol
RJC(IGBT)
RJC(DIODE)
RJA
Parameter
Thermal Resistance, Junction-to-Case
Thermal Resistance, Junction-to-Case
Thermal Resistance, Junction-to-Ambient
©2006 Fairchild Semiconductor Corporation
FGA50N100BNTD Rev. C1
1
Typ.
----
Max.
0.8
2.4
25
Unit
C/W
C/W
C/W
www.fairchildsemi.com
FGA50N100BNTD — 1000 V NPT Trench IGBT
November 2013
Part Number
Top Mark
Package
FGA50N100BNTDTU
FGA50N100BNTD
TO-3P
Electrical Characteristics of IGBT
Symbol
Packing
Method Reel Size Tape Width
Rail / Tube
N/A
Quantity
N/A
30
TC = 25C unless otherwise noted
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
1000
--
--
V
VGE = ± 25 V, VCE = 0 V
---
---
1.0
± 500
mA
nA
IC = 60 mA, VCE = VGE
IC = 10 A, VGE = 15 V
IC = 60 A, VGE = 15 V
4.0
---
5.0
1.5
2.5
7.0
1.8
2.9
V
V
V
----
6000
260
200
----
pF
pF
pF
--------
140
320
630
130
275
45
95
---250
350
---
ns
ns
ns
ns
nC
nC
nC
Typ.
1.2
1.8
1.2
0.05
Max.
1.7
2.1
1.5
2
Unit
V
V
us
uA
Off Characteristics
BVCES
ICES
IGES
Collector Emitter Breakdown Voltage
VGE = 0 V, IC = 1 mA
Collector Cut-Off Current
G-E Leakage Current
VCE = 1000 V, VGE = 0 V
On Characteristics
VGE(th)
VCE(sat)
G-E Threshold Voltage
Collector to Emitter
Saturation Voltage
Dynamic Characteristics
Cies
Coes
Cres
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
VCE=10 V, VGE = 0 V,
f = 1 MHz
Switching Characteristics
td(on)
tr
td(off)
tf
Qg
Qge
Qgc
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Gate Charge
Gate-Emitter Charge
Gate-Collector Charge
VCC = 600 V, IC = 60 A,
RG = 51 , VGE=15 V,
Resistive Load, TC = 25C
VCE = 600 V, IC = 60 A,
VGE = 15 V , , TC = 25C
Electrical Characteristics of DIODE T
C
Symbol
Parameter
VFM
Diode Forward Voltage
trr
IR
Diode Reverse Recovery Time
Instantaneous Reverse Current
©2006 Fairchild Semiconductor Corporation
FGA50N100BNTD Rev. C2
= 25C unless otherwise noted
Test Conditions
IF = 15 A
IF = 60 A
IF = 60 A diF/dt = 20 A/us
VRRM = 1000 V
2
Min.
----
www.fairchildsemi.com
FGA50N100BNTD — 1000 V NPT Trench IGBT
Package Marking and Ordering Information
80
8V
Common Emitter
VGE = 15V
80
o
Collector Current, I C [A]
Collector Current, I C [A]
90
20V
15V
10V
9V
Common Emitter
o
TC = 25 C
60
40
7V
20
Tc = 25 C
o
Tc = 125 C
70
60
50
40
30
20
10
VGE = 6V
0
0
0
1
2
3
4
5
0
Collector-Emitter Voltage, VCE [V]
1
2
3
4
Collector-Emitter Voltage, VCE [V]
Fig 1. Typical Output Characteristics
Fig 2. Typical Saturation Voltage Characteristics
Common Emitter
O
TC= - 40 C
3
Collector-Emitter Voltage, VCE[V]
Collector-Emitter Voltage, VCE [V]
10
Common Emitter
VGE=15V
80A
60A
2
30A
IC=10A
1
8
6
30A
4
60A
80A
2
IC=10A
0
-50
0
50
100
150
4
o
Case Temperature, TC [ C]
Fig 3. Saturation Voltage vs. Case
Temperature at Varient Current Level
16
10
Common Emitter
o
TC = 25 C
8
6
30A
60A
4
12
20
Fig 4. Saturation Voltage vs. VGE
Collector-Emitter Voltage, VCE [V]
Collector-Emitter Voltage, VCE [V]
10
8
Gate-Emitter Voltage, VGE [V]
80A
2
IC = 10A
0
Common Emitter
o
TC = 125 C
8
30A
6
60A
80A
4
2
IC = 10A
0
4
8
12
16
20
4
Fig 5. Saturation Voltage vs. VGE
©2006 Fairchild Semiconductor Corporation
FGA50N100BNTD Rev. C1
8
12
16
20
Gate-Emitter Voltage, VGE [V]
Gate-Emitter Voltage, VGE [V]
Fig 6. Saturation Voltage vs. VGE
3
www.fairchildsemi.com
FGA50N100BNTD — 1000 V NPT Trench IGBT
100
FGA50N100BNTD — 1000 V NPT Trench IGBT
10000
10000
Cies
V CC =600V, IC =60A
V GE = +/-15V
Switching Time [ns]
Capacitance [pF]
o
T C =25 C
1000
Coes
100
Cres
Common Emitter
VGE = 0V, f = 1MHz
Tdoff
1000
Tr
T don
Tf
100
o
TC = 25 C
0
5
10
15
20
25
10
30
0
50
100
Collector-Emitter Voltage, VCE [V]
150
200
Gate Resistance, R G [ ]
Fig 7. Capacitance Characteristics
Fig 8. Switching Characteristics vs.
Gate Resistance
20
Common Emitter
VCC=600V, RL=10
1000
V CC= 6 0 0 V , R g = 5 1
o
TC=25 C
o
Gate-Emitter Voltage,VGE [V]
Switching Time [ns]
V G E = + /-1 5 V , T C = 2 5 C
T d o ff
Tf
Tr
100
T don
15
10
5
0
10
20
30
40
50
0
60
50
100
150
200
250
300
Gate Charge, Qg [nC]
C o lle cto r C urre nt, IC [A ]
Fig 9. Switching Characteristics vs.
Collector Current
Fig 10. Gate Charge Characteristics
1
100
0.5
Ic MAX (Pulsed)
Ic MAX (Continuous)
0.2
Thermal Response [Zthjc]
Collector Current, Ic [A]
50 s
100 s
10
1ms
DC Operation
1
Single Nonrepetitive
o
Pulse Tc = 25 C
Curves must be derated
linearly with increase
in temperature
0.1
0.01
0.1
1
0.1
0.1
0.05
0.02
singlepulse
0.01
0.01
1E-3
1E-5
10
100
1000
1E-4
1E-3
0.01
0.1
1
10
Rectangular PulseDuration[sec]
Collector - Emitter Voltage, V CE [V]
Fig 11. SOA Characteristics
©2006 Fairchild Semiconductor Corporation
FGA50N100BNTD Rev. C1
Fig 12. Transient Thermal Impedance of IGBT
4
www.fairchildsemi.com
120
IF= 60 A
o
Forward Current, IF[A]
T C = 100 C
10
o
T C = 25 C
1
0.1
0.0
0.5
1.0
1.5
2.0
TC= 25 C
1.0
0.8
80
trr
0.6
60
0.4
40
0.2
0
40
Forward Voltage, V F [V]
10
8
Irr
0.6
6
0.4
4
100
Reverse Current, IR [uA]
Reverse Recovery Time, trr [us]
160
200
0
240
1000
Reverse Recovery Current Irr [A]
12
trr
0.8
120
Fig 14. Reverse Recovery Characteristics
vs. diF/dt
di/dt=-20A/us
o
TC=25 C
1.0
80
di/dt [A/us]
Fig 13. Forward Characteristics
1.2
20
Irr
0.0
2.5
100
Reverse Recovery Current Irr [A]
Reverse Recovery Time, trr [us]
o
o
T C = 150 C
10
1
0.1
o
T C= 25 C
0.01
1E-3
10
20
30
40
50
60
0
Forward Current, IF [A]
300
600
900
Reverse Voltage, V R [V]
Fig 15. Reverse Recovery Characteristics vs.
Forward Current
250
Fig 16. Reverse Current vs. Reverse Voltage
o
TC = 25 C
Capacitance, Cj [pF]
200
150
100
50
0
0.1
1
10
100
Reverse Voltage, VR [V]
Fig 17. Junction capacitance
©2006 Fairchild Semiconductor Corporation
FGA50N100BNTD Rev. C1
5
www.fairchildsemi.com
FGA50N100BNTD — 1000 V NPT Trench IGBT
1.2
100
FGA50N100BNTD — 1000 V NPT Trench IGBT
Mechanical Dimensions
Figure 18. TO-3P 3L - 3LD, T03, PLASTIC, EIAJ SC-65
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/package/packageDetails.html?id=PN_TT3P0-003
©2006 Fairchild Semiconductor Corporation
FGA50N100BNTD Rev. C1
6
www.fairchildsemi.com
*Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY
PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY
THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used here in:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2.
A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to cause
the failure of the life support device or system, or to affect its safety or
effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website,
www.Fairchildsemi.com, under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild
Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of
up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and
warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is
committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative / In Design
Datasheet contains the design specifications for product development. Specifications
may change in any manner without notice.
Preliminary
First Production
Datasheet contains preliminary data; supplementary data will be published at a later
date. Fairchild Semiconductor reserves the right to make changes at any time without
notice to improve design.
No Identification Needed
Full Production
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve the design.
Obsolete
Not In Production
Datasheet contains specifications on a product that is discontinued by Fairchild
Semiconductor. The datasheet is for reference information only.
Rev. I66
©2006 Fairchild Semiconductor Corporation
FGA50N100BNTD Rev. C1
7
www.fairchildsemi.com
FGA50N100BNTD — 1000 V NPT Trench IGBT
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
AccuPower™
Sync-Lock™
F-PFS™
®
AX-CAP®*
FRFET®
®*
®
BitSiC™
Global Power ResourceSM
PowerTrench
Build it Now™
GreenBridge™
PowerXS™
TinyBoost®
CorePLUS™
Green FPS™
Programmable Active Droop™
TinyBuck®
®
CorePOWER™
Green FPS™ e-Series™
QFET
TinyCalc™
Gmax™
CROSSVOLT™
QS™
TinyLogic®
CTL™
GTO™
Quiet Series™
TINYOPTO™
Current Transfer Logic™
IntelliMAX™
RapidConfigure™
TinyPower™
DEUXPEED®
ISOPLANAR™
™
TinyPWM™
Marking Small Speakers Sound Louder
Dual Cool™
TinyWire™
and Better™
Saving our world, 1mW/W/kW at a time™
EcoSPARK®
TranSiC™
MegaBuck™
SignalWise™
EfficentMax™
TriFault Detect™
MICROCOUPLER™
SmartMax™
ESBC™
TRUECURRENT®*
MicroFET™
SMART
START™
®
SerDes™
MicroPak™
Solutions for Your Success™
®
®
MicroPak2™
SPM
Fairchild
MillerDrive™
STEALTH™
Fairchild Semiconductor®
UHC®
MotionMax™
SuperFET®
FACT Quiet Series™
®
Ultra FRFET™
®
mWSaver
SuperSOT™-3
FACT
UniFET™
SuperSOT™-6
OptoHiT™
FAST®
®
VCX™
SuperSOT™-8
OPTOLOGIC
FastvCore™
®
®
VisualMax™
SupreMOS
OPTOPLANAR
FETBench™
VoltagePlus™
SyncFET™
FPS™
XS™
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com
工商网监
湘ICP备2023018690号
