LXES1TBAA2-013

LXES1TBAA2-013 1. Application  ESD Protection 2. Features IEC61000-4-2(ESD) ±15kV(air), ±12kV(contact) Low capacitance : 0.55pF typical  Fast turn on and low clamping voltage  For 2lines  RoHS regulation conformity parts   3. Mechanical details （dimensions : mm） TOP VIEW BOTTOM VIEW 1.6±0.1 (6) 112 108 1.6±0.1 0.2±0.1 (4) (4) (5) ← device code XXX 8aJ (6) 1.0 ref. Typ1.0 ② 0.5 ref. ←trace code Typ0.5 ③ ← 1 pin mark ① 0.3±0.1 (1) (3) 0~0.1 (3) SIDE VIEW 0.55 max. 0.05±0.04 Pin configuration No. Terminal name (1) I/O 1 (2) VDD (3) I/O 2 (4) NC (5) GND (6) NC 0.5±0.1 1 (2) (1) LXES1TBAA2-013 4. Schematic 5. Maximum Ratings Rating Operating voltage(VDD-GND) ESD per IEC 61000-4-2 (air) Symbol Value Units VDC 5.5 V ±15 VESD ESD per IEC 61000-4-2 (contact) Lead Soldering Temperature kV ±12 TSOL 260(10sec.) o C C C Operating Temperature TOP -40 to +85 o Storage Temperature TSTO -40 to +125 o 6. Electrical characteristics (T=25 oC) Parameter Leakage Current (I/O-GND) Breakdown Voltage Capacitance (I/O-GND) Symbol Conditions ILeak Vpin5=0V, Vpin2=5V, VCH=0-5V VBV IBV = 1mA CIN Vpin5 = 0V, Vpin2 = 5V, VIN = 2.5V, f = 1MHz 2 Min Typ 6 0.55 Max Units 1 μA 9 V pF LXES1TBAA2-013 7. Typical Characteristic 100 1.0 0.8 Cline (pF) Voltage(V) 80 60 40 0.6 0.4 20 0.2 0 0.0 -10 0 10 20 30 Time(ns) 40 0 50 1 2 VDC (V) 8. Soldering Footprint （dimensions : mm） 0.30 0.40 (5) (4) 0.30 1.10 Land Pattern 0.50 Product area (1) (2) 4 Voltage – Capacitance Characteristic ESD Waveform（IEC61000-4-2：8kV Contact） (6) 3 (3) 0.50 Notes : this land layout is for reference purpose only. 3 5 LXES1TBAA2-013 9. Taping Specification （in mm） 1) Dimensions of Tape (Plastic tape) +0.1 Φ1.50 0 0.20±0.02 1.75±0.1 3.50±0.05 8.00+0.2 -0.1 1.78±0.05 1.78±0.04 0.50±0.05 4.00+0.1 2.00±0.05 0.62±0.02 4.00+0.1 Feeding　direction 2) Dimensions of Reel (in mm) Φ178 2.3±0.1 ±1.0 Φ54.4 Φ13±0.2 ±0.4 9.5±1.0 12.3±1.0 3) Packaging unit: 3,000 pcs / reel Note: 1. This datasheet's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 4