G3VM-21HR(TR)

G3VM-21HR MOS FET Relays Higher power, 2.5-A switching with SOP package. Low 20-mΩ ON Resistance. • Continuous load current of 2.5 A. (Connection C: 5 A) RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections 6 • Communication equipment 5 4 • Test & Measurement equipment OMRON logo • Data loggers Model name 932 Pin 1 mark • Industrial equipment 1 LOT.No. 3 2 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form Terminals Load voltage (peak value) * Model 20 V G3VM-21HR G3VM-21HR (TR) 1a Surface-mounting Terminals (SPST-NO) * The AC peak and DC value are given for the load voltage. SOP6 Minimum package quantity Number per tube Number per tape and reel 75 2,500 ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Connection A Continuous Connection B load current Connection C Connection A ON current reduction Connection B rate Connection C Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF ∆IF/°C VR TJ VOFF Rating 30 −0.3 5 125 20 2.5 2.5 5 −33.3 −33.3 −66.6 125 Unit mA mA/°C V °C V VI-O 1500 Vrms Ta Tstg −40 to +85 −55 to +125 °C °C With no icing or condensation With no icing or condensation - 260 °C 10 s IO ∆IO/°C TJ Measurement conditions Ta ≥ 25°C Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram Connection A A mA/°C Connection A: AC peak/DC Connection B and C: DC Ta ≥ 50°C Connection B °C AC for 1 min Connection C 1 6 Load 2 5 3 4 or AC DC 1 6 2 5 3 4 1 6 2 5 3 4 ■ Electrical Characteristics (Ta = 25°C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.18 1.33 1.48 Reverse current IR 10 Capacity between terminals CT 70 Trigger LED forward current IFT 3 Connection A 0.02 0.05 Maximum resistance Connection B RON 0.01 0.025 with output ON Connection C 0.005 Current leakage when the relay is open ILEAK 10 Capacity between terminals Coff 1000 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 1.5 5.0 Turn-OFF time tOFF 0.1 1.0 1 Unit V µA pF mA Ω Ω Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V Note: 2. Turn-ON and Turn-OFF Times V = 0, f = 1 MHz IF 1 IO = 100 mA 6 RL VDD IF = 5 mA, IO = 2 A, t < 1 s VOUT 2 4 IF = 5 mA, IO = 2 A, t < 1 s IF = 5 mA, IO = 4 A, t < 1 s VOFF = 20 V V = 0, f = 1 MHz IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 10 V (See note 2.) Load DC Load DC G3VM-21HR MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 20 Unit V Operating LED forward current IF 5 10 20 mA Continuous load current (AC peak/DC) IO - - 2 A Ambient operating temperature Ta −20 - 65 °C ■ Engineering Data Continuous load current vs. Ambient temperature Continuous load current IO (A) LED forward current IF (mA) IF - Ta 50 40 30 20 10 6 IF - VF Connection C 5 4 3 LED forward current vs. LED forward voltage IO - Ta LED forward current IF (mA) LED forward current vs. Ambient temperature Connection A and B 2 100 Ta = 25°C 10 1 1 0 -20 0 -20 0 20 40 60 80 100 120 0 20 40 Ambient temperature Ta (°C) 60 80 0.1 100 0.6 0.8 1 Ambient temperature Ta (°C) 1.2 1.4 1.6 1.8 LED forward voltage VF (V) Continuous load current vs. On-state voltage On-state resistance vs. Ambient temperature Trigger LED forward current vs. Ambient temperature Ta = 25°C Connection A IF = 5 mA 2 1 0 -1 IFT - Ta Trigger LED forward current IFT (mA) RON - Ta On-state resistance RON (Ω) Continuous load current IO (A) IO - VON 3 0.20 IO = 2.0 A IF = 5 mA t < 1s Connection A 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 -2 0 0.04 0.08 -40 0 -20 On-state voltage VON (V) 20 40 60 80 100 Ta = 25°C VDD = 10 V, RL = 200 Ω t < 1s tON 1 tOFF 0.1 0.6 0.5 0.4 0.3 0.2 0 -20 tON tOFF 0.1 60 80 100 ILEAK - VOFF VDD = 10 V, RL = 200 Ω IF = 5 mA t < 1s 1 40 Current leakage vs. Load voltage tON, tOFF - Ta 10 20 Ambient temperature Ta (°C) Current leakage ILEAK (nA) Turn ON, Turn OFF time tON, tOFF (ms) Turn ON, Turn OFF time tON, tOFF (ms) 10 0.7 Ambient temperature Ta (°C) Turn ON, Turn OFF time vs. LED forward current Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - IF IO = 100 mA t < 1s 0.8 0 -40 0 -0.04 0.9 0.1 0.02 -3 -0.08 1.0 10 Ta = 25°C 8 6 4 2 0.01 0.01 1 10 100 LED forward current IF (mA) -40 -20 0 20 40 60 80 100 Ambient temperature Ta (°C) 0 5 10 15 20 25 Load voltage (V) Output terminal capacitance vs. load voltage Output terminal capacitance COFF/COFF (0v) COFF - VOFF 1.0 Ta = 25°C 0.8 0.6 0.4 0.2 0 5 10 15 20 25 Load voltage (V) ■ Safety Precautions • Refer to "Common Precautions" for all G3VM models. 2 Appearance/Dimensions SOP6 type ■ Appearance SOP (Small Outline Package) SOP6 OMRON logo Model name 932 Pin 1 mark LOT.No. Note: The actual product is marked differently from the image shown here. ■ Dimensions (Unit: mm) Surface-mounting Terminals Actual Mounting Pad Dimensions Weight: 0.13 g 4.4±0.25 (Recommended Value, TOP VIEW) 2.1 max. 6.3±0.25 6 to 6.3 1.2 0.15 0.8 2.54±0.25 0.1±0.1 0.4±0.1 Note: The actual product is marked differently from the image shown here. 0.6±0.3 7.0±0.4 2.54 2.54 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K172-E1-01 0412(0412)(O)