FDD9411_F085

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. FDD9411-F085 N-Channel PowerTrench® MOSFET FDD9411-F085 N-Channel PowerTrench® MOSFET 40 V, 25 A, 7.8 mΩ Features D „ Typical RDS(on) = 6.2 mΩ at VGS = 10V, ID = 15 A „ Typical Qg(tot) = 15 nC at VGS = 10V, ID = 15 A „ UIS Capability „ RoHS Compliant D G „ Qualified to AEC Q101 G S Applications D-PAK TO-252 (TO-252) „ Automotive Engine Control S „ PowerTrain Management „ Solenoid and Motor Drivers „ Electronic Steering „ Integrated Starter/Alternator „ Primary Switch for 12V Systems MOSFET Maximum Ratings TJ = 25°C unless otherwise noted. Symbol VDSS Drain-to-Source Voltage VGS ID EAS PD Parameter Ratings 40 Units V ±20 V Gate-to-Source Voltage Drain Current - Continuous (VGS=10) (Note 1) TC = 25°C 25 Pulsed Drain Current TC = 25°C See Figure 4 Single Pulse Avalanche Energy (Note 2) 43.2 A mJ Power Dissipation 48.4 W Derate Above 25oC 0.32 W/oC TJ, TSTG Operating and Storage Temperature RθJC Thermal Resistance, Junction to Case RθJA Maximum Thermal Resistance, Junction to Ambient -55 to + 175 oC 3.1 oC/W 52 oC/W (Note 3) Notes: 1: Current is limited by bondwire configuration. 2: Starting TJ = 25°C, L = 0.6mH, IAS = 12A, VDD = 40V during inductor charging and VDD = 0V during time in avalanche. 3: RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance, where the case thermal reference is defined as the solder mounting surface of the drain pins. RθJC is guaranteed by design, while RθJAis determined by the board design. The maximum rating presented here is based on mounting on a 1 in2 pad of 2oz copper. Package Marking and Ordering Information Device Marking FDD9411 Device FDD9411-F085 ©2015 Semiconductor Components Industries, LLC. August-2017, Rev. 2 Package D-PAK(TO-252) 1 Reel Size 13” Tape Width 16mm Quantity 2500units Publication Order Number: FDD9411-F085/D Symbol Parameter Test Conditions Min. Typ. Max. Units Off Characteristics BVDSS Drain-to-Source Breakdown Voltage IDSS Drain-to-Source Leakage Current IGSS Gate-to-Source Leakage Current ID = 250μA, VGS = 0V VDS = 40V, VGS = 0V 40 - - V - - 1 μA - - 1 mA - - ±100 nA TJ = 25oC TJ = 175oC (Note 4) VGS = ±20V On Characteristics VGS(th) RDS(on) Gate to Source Threshold Voltage Drain to Source On Resistance VGS = VDS, ID = 250μA ID = 15A, VGS= 10V 2.0 3.4 4.0 V - 6.2 7.8 mΩ - 11.2 14 mΩ TJ = 25oC TJ = 175oC (Note 4) Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate Resistance f = 1MHz Qg(ToT) Total Gate Charge VGS = 0 to 10V Qg(th) Threshold Gate Charge VGS = 0 to 2V - 2 - nC Qgs Gate-to-Source Gate Charge - 5.3 - nC Qgd Gate-to-Drain “Miller“ Charge - 2.8 - nC ns VDS = 25V, VGS = 0V, f = 1MHz VDD = 32V ID = 15A - 1080 - pF - 340 - pF - 22 - pF - 2.6 - Ω - 15 22.5 nC Switching Characteristics ton Turn-On Time - - 24 td(on) Turn-On Delay - 8.7 - ns tr Rise Time - 7.2 - ns td(off) Turn-Off Delay - 15.8 - ns tf Fall Time - 4.4 - ns toff Turn-Off Time - - 30 ns VDD = 20V, ID = 15A, VGS = 10V, RGEN = 6Ω Drain-Source Diode Characteristics VSD Source-to-Drain Diode Voltage trr Reverse-Recovery Time Qrr Reverse-Recovery Charge ISD = 15A, VGS = 0V - - 1.25 V ISD = 7.5A, VGS = 0V - - 1.2 V VDD = 32V, IF = 15A, dISD/dt = 100A/μs - 35 53 ns - 20 30 nC Note: 4: The maximum value is specified by design at TJ = 175°C. Product is not tested to this condition in production. www.onsemi.com 2 FDD9411-F085 N-Channel PowerTrench® MOSFET Electrical Characteristics TJ = 25°C unless otherwise noted. 1.0 ID, DRAIN CURRENT (A) POWER DISSIPATION MULTIPLIER 80 1.2 0.8 0.6 0.4 0.2 0.0 VGS = 10V CURRENT LIMITED BY SILICON 60 CURRENT LIMITED BY PACKAGE 40 20 0 0 25 50 75 100 125 150 TC, CASE TEMPERATURE(oC) 25 175 Figure 1. Normalized Power Dissipation vs. Case Temperature 50 75 100 125 150 175 TC, CASE TEMPERATURE(oC) 200 Figure 2. Maximum Continuous Drain Current vs. Case Temperature NORMALIZED THERMAL IMPEDANCE, ZθJC 2 1 0.1 DUTY CYCLE - DESCENDING ORDER D = 0.50 0.20 0.10 0.05 0.02 0.01 PDM t1 t2 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZθJA x RθJA + TC SINGLE PULSE 0.01 -5 10 -4 10 -3 -2 -1 0 10 10 10 t, RECTANGULAR PULSE DURATION(s) 1 10 10 Figure 3. Normalized Maximum Transient Thermal Impedance 1000 TC = 25oC VGS = 10V IDM, PEAK CURRENT (A) FOR TEMPERATURES ABOVE 25oC DERATE PEAK CURRENT AS FOLLOWS: 100 I = I2 175 - TC 150 10 SINGLE PULSE 1 -5 10 -4 10 -3 -2 -1 10 10 10 t, RECTANGULAR PULSE DURATION(s) Figure 4. Peak Current Capability www.onsemi.com 3 0 10 1 10 FDD9411-F085 N-Channel PowerTrench® MOSFET Typical Characteristics 100 100 10 100us 1 OPERATION IN THIS AREA MAY BE LIMITED BY rDS(on) SINGLE PULSE TJ = MAX RATED TC = 25oC 0.1 0.01 0.1 1ms 10ms 100ms 1 10 VDS, DRAIN TO SOURCE VOLTAGE (V) TJ = 25oC 20 0 TJ = 175oC 2 TJ = -55oC 3 4 5 6 7 VGS, GATE TO SOURCE VOLTAGE (V) 80μs PULSE WIDTH Tj=25oC 60 100 10 TJ = 25 oC TJ = 175 oC 1 100 15V Top 10V 8V 7V 6V 5.5V 5V Bottom 20 0 Figure 9. Saturation Characteristics 10 0.2 0.4 0.6 0.8 1.0 1.2 Figure 8. Forward Diode Characteristics VGS 1 2 3 4 VDS, DRAIN TO SOURCE VOLTAGE (V) 1 VSD, BODY DIODE FORWARD VOLTAGE (V) 40 0 0.1 VGS = 0 V 0.1 0.0 8 ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 100 0.01 Figure 6. Unclamped Inductive Switching Capability Figure 7. Transfer Characteristics 80 STARTING TJ = 150oC tAV, TIME IN AVALANCHE (ms) NOTE: Refer to ON Semiconductor Application Notes AN7514 and AN7515 IS, REVERSE DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 60 40 STARTING TJ = 25oC 10 100 PULSE DURATION = 80μs DUTY CYCLE = 0.5% MAX VDD = 5V 80 If R = 0 tAV = (L)(IAS)/(1.3*RATED BVDSS - VDD) If R ≠ 0 tAV = (L/R)ln[(IAS*R)/(1.3*RATED BVDSS - VDD) +1] 1 1E-3 100 Figure 5. Forward Bias Safe Operating Area 100 -IAS, AVALANCHE CURRENT (A) ID, DRAIN CURRENT (A) 1000 5 VGS 15V Top 10V 8V 7V 6V 5.5V 5V Bottom 80 60 40 20 0 80μs PULSE WIDTH Tj=175oC 0 1 2 3 4 VDS, DRAIN TO SOURCE VOLTAGE (V) Figure 10. Saturation Characteristics www.onsemi.com 4 5 FDD9411-F085 N-Channel PowerTrench® MOSFET Typical Characteristics NORMALIZED DRAIN TO SOURCE ON-RESISTANCE rDS(on), DRAIN TO SOURCE ON-RESISTANCE (mΩ) 120 PULSE DURATION = 80μs DUTY CYCLE = 0.5% MAX ID = 15A 90 TJ = 25oC 60 30 TJ = 175oC 0 4 5 6 7 8 9 VGS, GATE TO SOURCE VOLTAGE (V) 10 Figure 11. RDSON vs. Gate Voltage 1.2 0.8 0.4 -80 ID = 15A VGS = 10V -40 0 40 80 120 160 TJ, JUNCTION TEMPERATURE(oC) 200 ID = 1mA 1.05 1.00 0.95 0.6 -40 0 40 80 120 160 TJ, JUNCTION TEMPERATURE(oC) Ciss 1000 Coss 100 Crss 1 10 VDS, DRAIN TO SOURCE VOLTAGE (V) 40 Figure 15. Capacitance vs. Drain to Source Voltage -40 0 40 80 120 160 TJ, JUNCTION TEMPERATURE (oC) 200 Figure 14. Normalized Drain to Source Breakdown Voltage vs. Junction Temperature VGS, GATE TO SOURCE VOLTAGE(V) 5000 f = 1MHz VGS = 0V 0.90 -80 200 Figure 13. Normalized Gate Threshold Voltage vs. Temperature CAPACITANCE (pF) 1.6 1.10 VGS = VDS ID = 250μA 0.9 10 0.1 2.0 Figure 12. Normalized RDSON vs. Junction Temperature 1.2 0.3 -80 PULSE DURATION = 80μs DUTY CYCLE = 0.5% MAX NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE NORMALIZED GATE THRESHOLD VOLTAGE 1.5 2.4 10 ID = 15A VDD = 16V 8 VDD = 24V 6 VDD = 20V 4 2 0 0 4 8 12 Qg, GATE CHARGE(nC) 16 Figure 16. Gate Charge vs. Gate to Source Voltage www.onsemi.com 5 FDD9411-F085 N-Channel PowerTrench® MOSFET Typical Characteristics ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ❖ © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com