NLSV2T244MUTAG

NLSV2T244 2-Bit Dual-Supply Non-Inverting Level Translator The NLSV2T244 is a 2−bit configurable dual−supply voltage level translator. The input An and output Bn ports are designed to track two different power supply rails, VCCA and VCCB respectively. Both supply rails are configurable from 0.9 V to 4.5 V allowing universal low−voltage translation from the input An to the output Bn port. www.onsemi.com MARKING DIAGRAMS • • • • • • • • • UDFN8 MU SUFFIX CASE 517AJ 8 Features Wide VCCA and VCCB Operating Range: 0.9 V to 4.5 V High−Speed w/ Balanced Propagation Delay Inputs and Outputs have OVT Protection to 4.5 V Non−preferential VCCA and VCCB Sequencing Outputs at 3−State until Active VCC is Reached Power−Off Protection Outputs Switch to 3−State with VCCB at GND Small Packaging: UDFN8, SO−8, Micro8 These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant 1 UPM G UP = Specific Device Code M = Date Code G = Pb−Free Package 8 2T244 ALYW G G SO−8 D SUFFIX CASE 751 8 1 1 A L Y W G Typical Applications • Mobile Phones, PDAs, Other Portable Devices = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package 8 Important Information Micro8 DM SUFFIX CASE 846A • ESD Protection for All Pins: 1 HBM (Human Body Model) > 5000 V 244 AYW G G 1 A Y W G = Assembly Location = Year = Work Week = Pb−Free Package ORDERING INFORMATION Device Package Shipping† NLSV2T244MUTAG UDFN8 (Pb−Free) 3000 / Tape & Reel NLSV2T244DR2G SO−8 (Pb−Free) 2500 / Tape & Reel NLSV2T244DMR2G Micro8 (Pb−Free) 4000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2016 March, 2016 − Rev. 4 1 Publication Order Number: NLSV2T244/D NLSV2T244 VCCA VCCB A1 B1 A2 B2 OE Figure 1. Logic Diagram PIN ASSIGNMENTS VCCA 1 8 VCCB A1 2 7 B1 A2 3 6 B2 OE 5 4 GND VCCA 1 8 VCCB A1 2 7 A2 3 6 OE 4 UDFN8 (Top View) 5 VCCA 1 8 VCCB B1 A1 2 7 B1 B2 A2 3 6 B2 OE 4 5 GND GND Micro8 (Top View) SOIC−8 (Top View) TRUTH TABLE PIN ASSIGNMENT PIN FUNCTION VCCA Input Port DC Power Supply VCCB Output Port DC Power Supply GND Inputs Outputs OE An Bn L L L Ground L H H An Input Port H X 3−State Bn Output Port OE Output Enable www.onsemi.com 2 NLSV2T244 MAXIMUM RATINGS Symbol VCCA, VCCB VI VC VO Rating Value DC Supply Voltage Condition Unit −0.5 to +5.5 V An −0.5 to +5.5 V OE −0.5 to +5.5 V (Power Down) Bn −0.5 to +5.5 (Active Mode) Bn −0.5 to +5.5 V (Tri−State Mode) Bn −0.5 to +5.5 V DC Input Voltage Control Input DC Output Voltage VCCA = VCCB = 0 V IIK DC Input Diode Current −20 VI < GND mA IOK DC Output Diode Current −50 VO < GND mA IO DC Output Source/Sink Current ±50 mA ICCA, ICCB DC Supply Current Per Supply Pin ±100 mA IGND DC Ground Current per Ground Pin ±100 mA TSTG Storage Temperature −65 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. RECOMMENDED OPERATING CONDITIONS Symbol VCCA, VCCB VI Parameter Positive DC Supply Voltage Bus Input Voltage VC Control Input VIO Bus Output Voltage TA Dt / DV Min Max Unit 0.9 4.5 V GND 4.5 V OE GND 4.5 V (Power Down Mode) Bn GND 4.5 V (Active Mode) Bn GND VCCB V (Tri−State Mode) Bn GND 4.5 V −40 +85 °C 0 10 nS Operating Temperature Range Input Transition Rise or Rate VI, from 30% to 70% of VCC; VCC = 3.3 V ±0.3 V Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. www.onsemi.com 3 NLSV2T244 DC ELECTRICAL CHARACTERISTICS −405C to +855C Symbol VIH VIL VOH Parameter Test Conditions Input HIGH Voltage (An, OE) Input LOW Voltage (An, OE) Output HIGH Voltage VCCA (V) VCCB (V) Min Max Unit 3.6 – 4.5 0.9 – 4.5 V 2.2 − 2.7 – 3.6 2.0 − 2.3 – 2.7 1.6 − 1.4 − 2.3 0.65 * VCCA − 0.9 – 1.4 0.9 * VCCA − 3.6 – 4.5 − 0.8 − 0.8 2.3 – 2.7 − 0.7 1.4 − 2.3 − 0.35 * VCCA 0.9 – 1.4 − 0.1 * VCCA IOH = −100 mA; VI = VIH 0.9 – 4.5 0.9 – 4.5 VCCB – 0.2 − IOH = −0.5 mA; VI = VIH 0.9 0.9 0.75 * VCCB − IOH = −2 mA; VI = VIH 1.4 1.4 1.05 − IOH = −6 mA; VI = VIH 1.65 1.65 1.25 − 2.3 2.3 2.0 − 2.3 2.3 1.8 − 2.7 2.7 2.2 − 2.3 2.3 1.7 − IOH = −12 mA; VI = VIH IOH = −18 mA; VI = VIH VOL Output LOW Voltage 0.9 – 4.5 2.7 – 3.6 3.0 3.0 2.4 − IOH = −24 mA; VI = VIH 3.0 3.0 2.2 − IOL = 100 mA; VI = VIL 0.9 – 4.5 0.9 – 4.5 − 0.2 IOL = 0.5 mA; VI = VIL 1.1 1.1 − 0.3 IOL = 2 mA; VI = VIL 1.4 1.4 − 0.35 IOL = 6 mA; VI = VIL 1.65 1.65 − 0.3 IOL = 12 mA; VI = VIL 2.3 2.3 − 0.4 2.7 2.7 − 0.4 2.3 2.3 − 0.6 3.0 3.0 − 0.4 IOL = 18 mA; VI = VIL IOL = 24 mA; VI = VIL V V V 3.0 3.0 − 0.55 Input Leakage Current VI = VCCA or GND 0.9 – 4.5 0.9 – 4.5 −1.0 1.0 mA IOFF Power−Off Leakage Current OE = 0 V 0 0.9 – 4.5 0.9 – 4.5 0 −1.0 −1.0 1.0 1.0 mA ICCA Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 − 4.5 − 1.0 mA ICCB Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 − 4.5 − 1.0 mA ICCA + ICCB Quiescent Supply Current VI = VCCA or GND; IO = 0, VCCA = VCCB 0.9 – 4.5 0.9 – 4.5 − 2.0 mA II DICCA Increase in ICC per Input Voltage, VI = VCCA – 0.6 V; Other Inputs at VCCA or GND VI = VCCA or GND 4.5 3.6 4.5 3.6 − 10 5.0 mA DICCB Increase in ICC per Input Voltage, VI = VCCA – 0.6 V; Other Inputs at VCCA or GND VI = VCCA or GND 4.5 3.6 4.5 3.6 − 10 5.0 mA 0.9 – 4.5 0.9 – 4.5 −1.0 1.0 mA IOZ I/O Tri−State Output Leakage Current TA = 25°C, OE = 0 V Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 4 NLSV2T244 TOTAL STATIC POWER CONSUMPTION (ICCA + ICCB) −405C to +855C VCCB (V) 4.5 VCCA (V) Min 3.3 Max Min 2.8 Max Min 1.8 Max Min 0.9 Max Min Max Unit 4.5 2 2 2 2 < 1.5 μA 3.3 2 2 2 2 < 1.5 μA 2.8