MBT3906DW1
Dual General Purpose
Transistor
The MBT3906DW1 device is a spin−off of our popular
SOT−23/SOT−323 three−leaded device. It is designed for general
purpose amplifier applications and is housed in the SOT−363
six−leaded surface mount package. By putting two discrete devices in
one package, this device is ideal for low−power surface mount
applications where board space is at a premium.
www.onsemi.com
MARKING
DIAGRAM
Features
•
•
•
•
•
•
•
•
hFE, 100−300
Low VCE(sat), ≤ 0.4 V
Simplifies Circuit Design
Reduces Board Space
Reduces Component Count
Available in 8 mm, 7−inch/3,000 Unit Tape and Reel
S Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant*
Symbol
Value
Unit
Collector −Emitter Voltage
VCEO
−40
Vdc
Collector −Base Voltage
VCBO
−40
Vdc
Emitter −Base Voltage
VEBO
−5.0
Vdc
IC
−200
mAdc
Collector Current − Continuous
Electrostatic Discharge
XX MG
G
1
XX = Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 6 of this data sheet.
MAXIMUM RATINGS
Rating
6
SOT−363/SC−88
CASE 419B
STYLE 1
ESD
HBM Class 2
MM Class B
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
PD
150
mW
Thermal Resistance,
Junction−to−Ambient
RqJA
833
°C/W
Junction and Storage
Temperature Range
TJ, Tstg
−55 to +150
°C
Total Package Dissipation (Note 1)
TA = 25°C
1. Device mounted on FR4 glass epoxy printed circuit board using the minimum
recommended footprint.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2013
August, 2019 − Rev. 7
1
Publication Order Number:
MBT3906DW1T1/D
MBT3906DW1
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Symbol
Min
Max
Unit
Collector −Emitter Breakdown Voltage (Note 2)
V(BR)CEO
−40
−
Vdc
Collector −Base Breakdown Voltage
V(BR)CBO
−40
−
Vdc
Emitter −Base Breakdown Voltage
V(BR)EBO
−5.0
−
Vdc
IBL
−
−50
nAdc
ICEX
−
−50
nAdc
60
80
100
60
30
−
−
300
−
−
−
−
−0.25
−0.4
−0.65
−
−0.85
−0.95
fT
250
−
MHz
Output Capacitance
Cobo
−
4.5
pF
Input Capacitance
Cibo
−
10.0
pF
2.0
12
0.1
10
100
400
3.0
60
−
4.0
Characteristic
OFF CHARACTERISTICS
Base Cutoff Current
Collector Cutoff Current
ON CHARACTERISTICS (Note 2)
DC Current Gain
(IC = −0.1 mAdc, VCE = −1.0 Vdc)
(IC = −1.0 mAdc, VCE = −1.0 Vdc)
(IC = −10 mAdc, VCE = −1.0 Vdc)
(IC = −50 mAdc, VCE = −1.0 Vdc)
(IC = −100 mAdc, VCE = −1.0 Vdc)
hFE
Collector −Emitter Saturation Voltage
(IC = −10 mAdc, IB = −1.0 mAdc)
(IC = −50 mAdc, IB = −5.0 mAdc)
VCE(sat)
Base −Emitter Saturation Voltage
(IC = −10 mAdc, IB = −1.0 mAdc)
(IC = −50 mAdc, IB = −5.0 mAdc)
VBE(sat)
−
Vdc
Vdc
SMALL− SIGNAL CHARACTERISTICS
Current −Gain − Bandwidth Product
Input Impedance
(VCE = −10 Vdc, IC = −1.0 mAdc, f = 1.0 kHz)
hie
Voltage Feedback Ratio
(VCE = −10 Vdc, IC = −1.0 mAdc, f = 1.0 kHz)
hre
Small −Signal Current Gain
(VCE = −10 Vdc, IC = −1.0 mAdc, f = 1.0 kHz)
hfe
Output Admittance
(VCE = −10 Vdc, IC = −1.0 mAdc, f = 1.0 kHz)
hoe
Noise Figure
(VCE = −5.0 Vdc, IC = −100 mAdc, RS = 1.0 k W, f = 1.0 kHz)
NF
kW
X 10− 4
−
mmhos
dB
SWITCHING CHARACTERISTICS
Delay Time
(VCC = −3.0 Vdc, VBE = 0.5 Vdc)
td
−
35
Rise Time
(IC = −10 mAdc, IB1 = −1.0 mAdc)
tr
−
35
Storage Time
(VCC = −3.0 Vdc, IC = −10 mAdc)
ts
−
225
Fall Time
(IB1 = IB2 = −1.0 mAdc)
tf
−
75
2. Pulse Test: Pulse Width ≤ 300 ms; Duty Cycle ≤ 2.0%.
www.onsemi.com
2
ns
ns
MBT3906DW1
3V
3V
< 1 ns
+9.1 V
275
275
< 1 ns
10 k
+0.5 V
10 k
0
Cs < 4 pF*
10.6 V
300 ns
DUTY CYCLE = 2%
Cs < 4 pF*
1N916
10 < t1 < 500 ms
10.9 V
t1
DUTY CYCLE = 2%
* Total shunt capacitance of test jig and connectors
Figure 1. Delay and Rise Time
Equivalent Test Circuit
Figure 2. Storage and Fall Time
Equivalent Test Circuit
TYPICAL TRANSIENT CHARACTERISTICS
10
5000
7.0
3000
2000
Cobo
5.0
Q, CHARGE (pC)
CAPACITANCE (pF)
TJ = 25°C
TJ = 125°C
Cibo
3.0
2.0
VCC = 40 V
IC/IB = 10
1000
700
500
300
200
QT
QA
1.0
0.1
0.2 0.3
0.5 0.7 1.0
2.0 3.0 5.0 7.0 10
REVERSE BIAS (VOLTS)
100
70
50
20 30 40
1.0
2.0 3.0
Figure 3. Capacitance
5.0 7.0 10
20 30 50 70 100
IC, COLLECTOR CURRENT (mA)
200
Figure 4. Charge Data
500
500
IC/IB = 10
300
200
VCC = 40 V
IB1 = IB2
300
200
100
70
50
tr @ VCC = 3.0 V
15 V
30
20
t f , FALL TIME (ns)
TIME (ns)
IC/IB = 20
100
70
50
30
20
IC/IB = 10
40 V
10
7
5
10
2.0 V
7
5
td @ VOB = 0 V
1.0
2.0 3.0
5.0 7.0 10
20
30
50 70 100
200
1.0
2.0 3.0
5.0 7.0 10
20
30
50 70 100
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 5. Turn −On Time
Figure 6. Fall Time
www.onsemi.com
3
200
MBT3906DW1
TYPICAL AUDIO SMALL−SIGNAL CHARACTERISTICS
NOISE FIGURE VARIATIONS
(VCE = − 5.0 Vdc, TA = 25°C, Bandwidth = 1.0 Hz)
12
SOURCE RESISTANCE = 200 W
IC = 1.0 mA
4.0
f = 1.0 kHz
SOURCE RESISTANCE = 200 W
IC = 0.5 mA
3.0
SOURCE RESISTANCE = 2.0 k
IC = 50 mA
2.0
SOURCE RESISTANCE = 2.0 k
IC = 100 mA
1.0
0
0.1
0.2
0.4
IC = 1.0 mA
10
NF, NOISE FIGURE (dB)
NF, NOISE FIGURE (dB)
5.0
1.0 2.0 4.0
10
f, FREQUENCY (kHz)
20
40
IC = 0.5 mA
8
6
4
IC = 50 mA
2
IC = 100 mA
0
100
0.1
0.2
0.4
1.0 2.0
4.0
10
20
Rg, SOURCE RESISTANCE (k OHMS)
Figure 7.
40
100
Figure 8.
h PARAMETERS
(VCE = − 10 Vdc, f = 1.0 kHz, TA = 25°C)
100
hoe, OUTPUT ADMITTANCE (m mhos)
h fe , DC CURRENT GAIN
300
200
100
70
50
70
50
30
20
10
7
30
0.1
0.2
0.3
0.5 0.7 1.0
2.0 3.0
IC, COLLECTOR CURRENT (mA)
5
5.0 7.0 10
0.1
0.2
h ie , INPUT IMPEDANCE (k OHMS)
20
10
7.0
5.0
3.0
2.0
1.0
0.7
0.5
0.3
0.2
0.1
0.2
0.3
0.5 0.7 1.0
2.0 3.0
IC, COLLECTOR CURRENT (mA)
5.0 7.0 10
Figure 10. Output Admittance
hre , VOLTAGE FEEDBACK RATIO (x 10 -4)
Figure 9. Current Gain
0.3
0.5 0.7 1.0
2.0 3.0
IC, COLLECTOR CURRENT (mA)
5.0 7.0 10
10
7.0
5.0
3.0
2.0
1.0
0.7
0.5
0.1
Figure 11. Input Impedance
0.2
0.3
0.5 0.7 1.0
2.0 3.0
IC, COLLECTOR CURRENT (mA)
5.0 7.0 10
Figure 12. Voltage Feedback Ratio
www.onsemi.com
4
MBT3906DW1
h FE, DC CURRENT GAIN (NORMALIZED)
TYPICAL STATIC CHARACTERISTICS
2.0
TJ = +125°C
VCE = 1.0 V
+25°C
1.0
0.7
-55°C
0.5
0.3
0.2
0.1
0.1
0.2
0.3
0.5
0.7
1.0
2.0
3.0
5.0 7.0 10
IC, COLLECTOR CURRENT (mA)
20
30
50
70
100
200
VCE, COLLECTOR EMITTER VOLTAGE (VOLTS)
Figure 13. DC Current Gain
1.0
TJ = 25°C
0.8
IC = 1.0 mA
10 mA
30 mA
100 mA
0.6
0.4
0.2
0
0.01
0.02
0.03
0.05
0.07
0.2
0.3
0.5
IB, BASE CURRENT (mA)
0.1
0.7
1.0
2.0
3.0
5.0
7.0
10
Figure 14. Collector Saturation Region
TJ = 25°C
V, VOLTAGE (VOLTS)
0.8
q V , TEMPERATURE COEFFICIENTS (mV/ °C)
1.0
VBE(sat) @ IC/IB = 10
VBE @ VCE = 1.0 V
0.6
0.4
VCE(sat) @ IC/IB = 10
0.2
0
1.0
2.0
50
5.0
10
20
IC, COLLECTOR CURRENT (mA)
100
1.0
0.5
0
+25°C TO +125°C
-55°C TO +25°C
-0.5
+25°C TO +125°C
-1.0
-55°C TO +25°C
qVB FOR VBE(sat)
-1.5
-2.0
200
qVC FOR VCE(sat)
0
Figure 15. “ON” Voltages
20
40
60
80 100 120 140
IC, COLLECTOR CURRENT (mA)
160
Figure 16. Temperature Coefficients
www.onsemi.com
5
180 200
MBT3906DW1
DEVICE ORDERING INFORMATION
Device
Marking
Pin Out
Package
Shipping†
MBT3906DW1T1G
A2
SOT−363
(Pb−Free)
3000 / Tape & Reel
SMBT3906DW1T1G
A2
SOT−363
(Pb−Free)
3000 / Tape & Reel
SMBT3906DW3T1G
A3
SOT−363
(Pb−Free)
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
6
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SC−88/SC70−6/SOT−363
CASE 419B−02
ISSUE Y
1
SCALE 2:1
DATE 11 DEC 2012
2X
aaa H D
D
H
A
D
6
5
GAGE
PLANE
4
1
2
L
L2
E1
E
DETAIL A
3
aaa C
2X
bbb H D
2X 3 TIPS
e
B
6X
b
ddd
TOP VIEW
C A-B D
M
A2
DETAIL A
A
6X
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER END.
4. DIMENSIONS D AND E1 AT THE OUTERMOST EXTREMES OF
THE PLASTIC BODY AND DATUM H.
5. DATUMS A AND B ARE DETERMINED AT DATUM H.
6. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE
LEAD BETWEEN 0.08 AND 0.15 FROM THE TIP.
7. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION.
ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN
EXCESS OF DIMENSION b AT MAXIMUM MATERIAL CONDITION. THE DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OF THE FOOT.
ccc C
A1
SIDE VIEW
C
SEATING
PLANE
END VIEW
c
RECOMMENDED
SOLDERING FOOTPRINT*
6X
DIM
A
A1
A2
b
C
D
E
E1
e
L
L2
aaa
bbb
ccc
ddd
MILLIMETERS
MIN
NOM MAX
−−−
−−−
1.10
0.00
−−−
0.10
0.70
0.90
1.00
0.15
0.20
0.25
0.08
0.15
0.22
1.80
2.00
2.20
2.00
2.10
2.20
1.15
1.25
1.35
0.65 BSC
0.26
0.36
0.46
0.15 BSC
0.15
0.30
0.10
0.10
GENERIC
MARKING DIAGRAM*
6
XXXMG
G
6X
0.30
INCHES
NOM MAX
−−− 0.043
−−− 0.004
0.035 0.039
0.008 0.010
0.006 0.009
0.078 0.086
0.082 0.086
0.049 0.053
0.026 BSC
0.010 0.014 0.018
0.006 BSC
0.006
0.012
0.004
0.004
MIN
−−−
0.000
0.027
0.006
0.003
0.070
0.078
0.045
0.66
1
2.50
0.65
PITCH
XXX = Specific Device Code
M
= Date Code*
G
= Pb−Free Package
(Note: Microdot may be in either location)
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
*Date Code orientation and/or position may
vary depending upon manufacturing location.
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
STYLES ON PAGE 2
DOCUMENT NUMBER:
DESCRIPTION:
98ASB42985B
SC−88/SC70−6/SOT−363
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 2
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
SC−88/SC70−6/SOT−363
CASE 419B−02
ISSUE Y
DATE 11 DEC 2012
STYLE 1:
PIN 1. EMITTER 2
2. BASE 2
3. COLLECTOR 1
4. EMITTER 1
5. BASE 1
6. COLLECTOR 2
STYLE 2:
CANCELLED
STYLE 3:
CANCELLED
STYLE 4:
PIN 1. CATHODE
2. CATHODE
3. COLLECTOR
4. EMITTER
5. BASE
6. ANODE
STYLE 5:
PIN 1. ANODE
2. ANODE
3. COLLECTOR
4. EMITTER
5. BASE
6. CATHODE
STYLE 6:
PIN 1. ANODE 2
2. N/C
3. CATHODE 1
4. ANODE 1
5. N/C
6. CATHODE 2
STYLE 7:
PIN 1. SOURCE 2
2. DRAIN 2
3. GATE 1
4. SOURCE 1
5. DRAIN 1
6. GATE 2
STYLE 8:
CANCELLED
STYLE 9:
PIN 1. EMITTER 2
2. EMITTER 1
3. COLLECTOR 1
4. BASE 1
5. BASE 2
6. COLLECTOR 2
STYLE 10:
PIN 1. SOURCE 2
2. SOURCE 1
3. GATE 1
4. DRAIN 1
5. DRAIN 2
6. GATE 2
STYLE 11:
PIN 1. CATHODE 2
2. CATHODE 2
3. ANODE 1
4. CATHODE 1
5. CATHODE 1
6. ANODE 2
STYLE 12:
PIN 1. ANODE 2
2. ANODE 2
3. CATHODE 1
4. ANODE 1
5. ANODE 1
6. CATHODE 2
STYLE 13:
PIN 1. ANODE
2. N/C
3. COLLECTOR
4. EMITTER
5. BASE
6. CATHODE
STYLE 14:
PIN 1. VREF
2. GND
3. GND
4. IOUT
5. VEN
6. VCC
STYLE 15:
PIN 1. ANODE 1
2. ANODE 2
3. ANODE 3
4. CATHODE 3
5. CATHODE 2
6. CATHODE 1
STYLE 16:
PIN 1. BASE 1
2. EMITTER 2
3. COLLECTOR 2
4. BASE 2
5. EMITTER 1
6. COLLECTOR 1
STYLE 17:
PIN 1. BASE 1
2. EMITTER 1
3. COLLECTOR 2
4. BASE 2
5. EMITTER 2
6. COLLECTOR 1
STYLE 18:
PIN 1. VIN1
2. VCC
3. VOUT2
4. VIN2
5. GND
6. VOUT1
STYLE 19:
PIN 1. I OUT
2. GND
3. GND
4. V CC
5. V EN
6. V REF
STYLE 20:
PIN 1. COLLECTOR
2. COLLECTOR
3. BASE
4. EMITTER
5. COLLECTOR
6. COLLECTOR
STYLE 21:
PIN 1. ANODE 1
2. N/C
3. ANODE 2
4. CATHODE 2
5. N/C
6. CATHODE 1
STYLE 22:
PIN 1. D1 (i)
2. GND
3. D2 (i)
4. D2 (c)
5. VBUS
6. D1 (c)
STYLE 23:
PIN 1. Vn
2. CH1
3. Vp
4. N/C
5. CH2
6. N/C
STYLE 24:
PIN 1. CATHODE
2. ANODE
3. CATHODE
4. CATHODE
5. CATHODE
6. CATHODE
STYLE 25:
PIN 1. BASE 1
2. CATHODE
3. COLLECTOR 2
4. BASE 2
5. EMITTER
6. COLLECTOR 1
STYLE 26:
PIN 1. SOURCE 1
2. GATE 1
3. DRAIN 2
4. SOURCE 2
5. GATE 2
6. DRAIN 1
STYLE 27:
PIN 1. BASE 2
2. BASE 1
3. COLLECTOR 1
4. EMITTER 1
5. EMITTER 2
6. COLLECTOR 2
STYLE 28:
PIN 1. DRAIN
2. DRAIN
3. GATE
4. SOURCE
5. DRAIN
6. DRAIN
STYLE 29:
PIN 1. ANODE
2. ANODE
3. COLLECTOR
4. EMITTER
5. BASE/ANODE
6. CATHODE
STYLE 30:
PIN 1. SOURCE 1
2. DRAIN 2
3. DRAIN 2
4. SOURCE 2
5. GATE 1
6. DRAIN 1
Note: Please refer to datasheet for
style callout. If style type is not called
out in the datasheet refer to the device
datasheet pinout or pin assignment.
DOCUMENT NUMBER:
DESCRIPTION:
98ASB42985B
SC−88/SC70−6/SOT−363
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 2 OF 2
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
工商网监
湘ICP备2023018690号
