2SB1260T100R

2SB1260 / 2SB1181 Datasheet PNP -1.0A -80V Middle Power Transistor lOutline Value VCEO IC -80V -1.0A MPT3 Collector CPT3 Base Collector Emitter 2SB1260 (SC-62) Emitter 2SB1181 (SC-63) e N co ew m m D es en ig de ns d f lFeatures 1) Suitable for Middle Power Driver 2) Complementary NPN Types : 2SD1898 / 2SD1733 3) Low VCE(sat) VCE(sat)= -0.4V Max. (IC/IB= -500mA/ -50mA) Base or Parameter 4) Lead Free/RoHS Compliant. lInner circuit Collector lApplications Motor driver , LED driver Power supply Base Emitter R lPackaging specifications Package Package size (mm) Taping code 2SB1260 MPT3 4540 T100 180 12 1,000 BE 2SB1181 CPT3 6595 TL 330 16 2,500 B1181 N ot Part No. www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 1/7 Basic Reel size Tape width ordering (mm) (mm) unit (pcs) Marking 2013.07 - Rev.H Data Sheet 2SB1260 / 2SB1181 lAbsolute maximum ratings (Ta = 25°C) Symbol VCBO VCEO VEBO IC ICP *1 DC Pulsed Collector current Values -80 -80 -5 -1.0 -2.0 0.5 *2 2.0 *3 1 *4 10 *5 150 -55 to +150 2SB1260 PD Power dissipation Unit V V V A A or Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage e N co ew m m D es en ig de ns d f 2SB1181 W Junction temperature Range of storage temperature *1 Pw=20ms , duty=1/2 *2 Each terminal mounted on a reference land *3 Mounted on a ceramic board (40×40×0.7 mm) *4 Mounted on a substrate *5 TC=25°C lElectrical characteristics (Ta = 25°C) Parameter Symbol Collector-emitter BVCEO breakdown voltage Collector-base BVCBO breakdown voltage Emitter-base BVEBO breakdown voltage Tj Tstg Conditions W °C °C Min. Typ. Max. Unit IC = -1mA -80 - - V IC = -50mA -80 - - V IE = -50mA -5 - - V ICBO VCB = -60V - - -1 mA Emitter cut-off current IEBO VEB = -4V - - -1 mA VCE(sat) IC = -1A, IB = -50mA - - -0.4 V hFE VCE = -3V, IC = -0.1A 120 - 390 - fT VCE = -10V, IE = 50mA f=100MHZ - 100 - MHz - 20 *6 - pF - 25 *7 - pF R Collector cut-off current N ot Collector-emitter saturation voltage DC current gain Transition frequency Cob Output capacitance VCB = -10V, IE = 0A f = 1MHz *6 2SB1260 *7 2SB1181 lhFE rank categories Rank hFE Q 120 to 270 www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. R 180 to 390 2/7 2013.07 - Rev.H Data Sheet 2SB1260 / 2SB1181 lElectrical characteristic curves(Ta = 25°C) Fig.2 Typical Output Characteristics Fig.1 Ground Emitter Propagation Characteristics -100 Ta=85ºC 25ºC -40ºC -10 -1 -0.1 -0 or COLLECTOR CURRENT : IC [A] VCE= -5V Pulsed e N co ew m m D es en ig de ns d f COLLECTOR CURRENT : IC [mA] -1000 -0.5 -1 -1.5 COLECTOR TO EMITTE VOLTAGE : VCE [V] BASE TO EMITTER VOLTAGE : VBE [V] Fig.3 DC Current Gain vs. Collector Current(I) Fig.4 DC Current Gain vs. Collector Current(II) 1000 1000 Ta=25ºC DC CURRENT GAIN : hFE R 100 N ot DC CURRENT GAIN : hFE VCE= -3V 10 -1 Ta=85ºC 25ºC -40ºC -10 -100 -1000 VCE= -3V -1V 10 -10000 COLLECTOR CURRENT : IC [mA] www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 100 -1 -10 -100 -1000 -10000 COLLECTOR CURRENT : IC [mA] 3/7 2013.07 - Rev.H Data Sheet 2SB1260 / 2SB1181 lElectrical characteristic curves(Ta = 25°C) Fig.6 Collector-Emitter Saturation Voltage vs. Collector Current (II) Fig.5 Collector-Emitter Saturation Voltage vs. Collector Current (I) -0.1 -0.01 Ta=85ºC 25ºC -40ºC -1 -1 -10 -100 -1000 -10000 COLLECTOR CURRENT : IC [mA] -1 -10 -1 -10 -100 -1000 -10000 TRANSITION FREQUENCY : fT [MHz] R BASE-EMITTER SATURATION VOLTAGE : VBE(sat) [V] Ta= -40ºC 25ºC 85ºC N ot -0.1 -0.01 Fig.8 Gain Bandwidth Product vs. Emitter Current IC / IB = 10 -1 IC / IB =20/1 10/1 -0.1 COLLECTOR CURRENT : IC [mA] Fig.7 Base-Emitter Saturation Voltage vs. Collector Current -10 Ta=25ºC or COLLECTOR-EMITTER SATURATION VOLTAGE : VCE(sat) [V] IC / IB = 10 e N co ew m m D es en ig de ns d f COLLECTOR-EMITTER SATURATION VOLTAGE : VCE(sat) [V] -1 -100 -1000 -10000 EMITTER CURRENT :IE [mA] COLLECTOR CURRENT : IC [mA] www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 4/7 2013.07 - Rev.H Data Sheet 2SB1260 / 2SB1181 lElectrical characteristic curves(Ta = 25°C) COLLECTOR OUTPUT CAPACITANCE : Cob [pF] Fig.9 Collector output capacitance vs. Collector-Base Voltage Fig.10 Safe Operating Area 2SB1260 or 1ms -1 10ms e N co ew m m D es en ig de ns d f COLLECTOR CURRENT : IC [A] -10 -0.1 100ms -0.01 -0.001 COLLECTOR - BASE VOLTAGE : VCB [V] DC (Mounted on a reference land) Ta=25ºC Single non repetitive pulse -0.1 -1 -10 -100 COLLECTOR TO EMITTER VOLTAGE : VCE [V] Fig.11 Safe Operating Area 2SB1181 100ms 10ms R -1 -0.1 DC N ot COLLECTOR CURRENT : IC [A] -10 -0.01 -0.001 Ta=25ºC Single non repetitive pulse -0.1 -1 -10 -100 COLLECTOR TO EMITTER VOLTAGE : VCE [V] www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 5/7 2013.07 - Rev.H Data Sheet 2SB1260 / 2SB1181 lDimensions (Unit : mm) D b1 A Lp or E LE HE MPT3 b2 b c b4 e N co ew m m D es en ig de ns d f x S A e1 A l1 β l3 e b5 y S l2 b3 e1 S e Pattern of terminal position areas [Not a recommended pattern of soldering pads] DIM N ot R A b b1 b2 c D E e e1 HE LE Lp x y DIM b3 b4 b5 l1 l2 l3 β MILIMETERS MIN MAX 1.40 1.50 0.30 0.50 1.50 1.70 0.40 0.60 0.35 0.50 4.40 4.70 2.40 2.70 3.00 1.50 3.70 4.30 0.80 1.20 1.01 1.41 0.15 0.10 INCHES MIN 0.055 0.012 0.059 0.016 0.014 0.173 0.094 0.118 0.059 0.146 0.031 0.040 - MILIMETERS MIN MAX 0.65 1.70 0.75 1.71 0.58 3.72 45° MAX 0.059 0.020 0.067 0.024 0.020 0.185 0.106 0.169 0.047 0.056 0.006 0.004 INCHES MIN 45° MAX 0.026 0.067 0.030 0.067 0.023 0.146 Dimension in mm / inches www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 6/7 2013.07 - Rev.H Data Sheet 2SB1260 / 2SB1181 lDimensions (Unit : mm) A2 D B A b1 c1 H E L3 L2 CPT3 L4 or A1 b2 Lp L1 e N co ew m m D es en ig de ns d f L b3 c e b x B A A3 l3 l1 e b6 b5 l2 Pattern of terminal position areas [Not a recommended pattern of soldering pads] MILIMETERS MIN MAX 0.00 0.15 2.20 2.50 0.25 0.55 0.75 5.00 5.30 5.00 0.75 0.40 0.60 0.40 0.60 6.30 6.70 5.40 5.80 2.30 9.00 10.00 2.20 2.80 0.80 1.40 1.20 1.80 5.30 0.90 1.00 1.60 0.25 DIM b5 b6 ｌ1 ｌ2 ｌ3 MILIMETERS MIN MAX 1.00 5.20 2.50 5.50 10.00 N ot R DIM A1 A2 A3 b b1 b2 b3 c c1 D E e HE L L1 L2 L3 L4 Lp x INCHES MIN 0.000 0.087 0.010 0.022 0.197 MAX 0.006 0.098 0.030 0.209 0.197 0.030 0.016 0.016 0.248 0.213 0.354 0.087 0.031 0.047 0.039 MIN - 0.024 0.024 0.264 0.228 0.091 0.209 0.035 INCHES 0.394 0.110 0.055 0.071 0.063 0.010 MAX 0.04 0.205 0.098 0.217 0.394 Dimension in mm / inches www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. 7/7 2013.07 - Rev.H Notice Notes 1) The information contained herein is subject to change without notice. or 2) Before you use our Products, please contact our sales representative and verify the latest specifications : e N co ew m m D es en ig de ns d f 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. R 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. N ot 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. R1102A