Data sheet
6EP4133-0GB00-0AY0
SITOP UPS1100/Battery module/24V/3.2AH
SITOP UPS1100 battery module with maintenance- free sealed lead-acid batteries
for SITOP DC UPS modules 24 V DC 3.2 Ah
electrical data
end-of-charge voltage at DC
● at -10 °C recommended
28 V
● at 0 °C recommended
28 V
● at 10 °C recommended
27.8 V
● at 20 °C recommended
27.3 V
● at 30 °C recommended
26.8 V
● at 40 °C recommended
26.6 V
● at 50 °C recommended
26.3 V
output
battery capacity
3.2 A·h
output current rated value
20 A
output current in buffering mode maximum
20 A
peak current
60 A; for 30 ms
charging current maximum
0.8 A
output voltage at DC rated value
24 V
interfaces
communication function
Yes
protection and monitoring
design of short-circuit protection
Battery fuse 25 A/32 V (solid-state circuitry blade-type fuse + support)
design of the overload protection
Valve control
display version for normal operation
LED green: Battery OK; LED flashing green: Error or warning; OFF: No
communication
safety
operating resource protection class
Class III
protection class IP
IP20
standards, specifications, approvals
certificate of suitability
● CE marking
Yes
● UL approval
Yes; cURus-Recognized (UL 1778, CSA C22.2 No. 107.1), File E219627
● CSA approval
No
● EAC approval
Yes
standards, specifications, approvals hazardous environments
certificate of suitability
● ATEX
No
● cCSAus, Class 1, Division 2
No
standards, specifications, approvals marine classification
shipbuilding approval
Yes
Marine classification association
● American Bureau of Shipping Europe Ltd. (ABS)
6EP41330GB000AY0
Page 1/3
Yes
5/9/2024
Subject to change without notice
© Copyright Siemens
● Det Norske Veritas (DNV)
Yes
standards, specifications, approvals Environmental Product Declaration
Environmental Product Declaration
Yes
Global Warming Potential [CO2 eq]
● total
16 kg
● during manufacturing
9.4 kg
● during operation
4.9 kg
● after end of life
0.59 kg
ambient conditions
ambient condition
For storage, mounting and operation of lead-acid batteries, the relevant
DIN/VDE regulations or country-specific regulations (e.g. VDE 0510 Part 2/EN
50272-2) must be observed. You must ensure that the battery site is sufficiently
ventilated. Possible sources of ignition must be at least 50 cm away.
ambient temperature
● during operation
-15 ... +50 °C
● during transport
-20 ... +50 °C
● during storage
-20 ... +40 °C
relative temporary capacity loss at 20 °C in a month typical
3%
service life of energy storage
● typical
capacity falls to 80 % of original capacity (according to EUROBAT)
● at 20 °C typical
4a
● at 30 °C typical
2a
● at 40 °C typical
1a
● at 50 °C typical
0.5 a
note
Along with the storage and operating temperature, other factors such as the
duration of the storage period and the charge status during storage have a
decisive influence on the possible useful life. Batteries should therefore be
stored as briefly as possible, always fully charged, and within the temperature
range 0 to +20 °C.
connection method
type of electrical connection
screw terminal
● for power supply unit
1 screw terminal each for 0.2 ... 6 mm² for + BAT and - BAT
● for control circuit and status message
1 screw terminal each for 0.14 ... 4 mm²
mechanical data
width × height × depth of the enclosure
190 × 170 × 78.7 mm
installation width × mounting height
190 × 184 mm
required spacing
● top
15 mm
● bottom
0 mm
● left
0 mm
● right
0 mm
fastening method
snaps onto DIN rail EN 60715 35x15 or keyhole mounting for hooking in to M4
screws
● standard rail mounting
Yes
● S7 rail mounting
No
● wall mounting
Yes
net weight
3.8 kg
number of cells
12
accessories
product component included
Accessories pack with solid-state circuitry fuse 25 A
further information internet links
internet link
● to website: CAx-Download-Manager
http://www.siemens.com/cax
additional information
other information
Specifications at rated input voltage and ambient temperature +25 °C (unless
otherwise specified)
security information
security information
6EP41330GB000AY0
Page 2/3
Siemens provides products and solutions with industrial cybersecurity functions
that support the secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber
threats, it is necessary to implement – and continuously maintain – a holistic,
state-of-the-art industrial cybersecurity concept. Siemens’ products and
solutions constitute one element of such a concept. Customers are responsible
for preventing unauthorized access to their plants, systems, machines and
networks. Such systems, machines and components should only be connected
5/9/2024
Subject to change without notice
© Copyright Siemens
to an enterprise network or the internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or
network segmentation) are in place. For additional information on industrial
cybersecurity measures that may be implemented, please visit
www.siemens.com/cybersecurity-industry. Siemens’ products and solutions
undergo continuous development to make them more secure. Siemens strongly
recommends that product updates are applied as soon as they are available
and that the latest product versions are used. Use of product versions that are
no longer supported, and failure to apply the latest updates may increase
customer’s exposure to cyber threats. To stay informed about product updates,
subscribe to the Siemens Industrial Cybersecurity RSS Feed under
https://www.siemens.com/cert. (V4.7)
Classifications
Version
Classification
14
27-05-04-03
eClass
12
27-05-04-03
eClass
9.1
27-05-04-03
eClass
9
27-05-04-03
eClass
8
27-05-04-03
eClass
7.1
27-05-04-03
eClass
6
27-05-04-90
ETIM
9
EC000356
ETIM
8
EC000356
ETIM
7
EC000356
UNSPSC
15
26-11-17-01
eClass
Approvals Certificates
General Product Approval
Manufacturer Declaration
For use in hazardous locations
Declaration of Conformity
For use in hazardous locations
Marine / Shipping
CCC-Ex
Dangerous Good
Environment
Transport Information
Environmental Confirmations
last modified:
6EP41330GB000AY0
Page 3/3
Dangerous Good
Dangerous Goods Information
4/30/2024
5/9/2024
Subject to change without notice
© Copyright Siemens
很抱歉,暂时无法提供与“6EP4133-0GB00-0AY0”相匹配的价格&库存,您可以联系我们找货
免费人工找货