6GK7342-5DA03-0XE0

Data sheet product type designation 6GK7342-5DA03-0XE0 CP 342-5 Communications processor CP 342-5 for connection of SIMATIC S7-300 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication. transfer rate transfer rate ● at the 1st interface / according to PROFIBUS 9.6 kbit/s ... 12 Mbit/s interfaces number of interfaces / according to Industrial Ethernet 0 number of electrical connections ● at the 1st interface / according to PROFIBUS 1 ● for power supply 1 type of electrical connection ● at the 1st interface / according to PROFIBUS 9-pin Sub-D socket (RS485) ● for power supply 4-pole terminal block supply voltage, current consumption, power loss type of voltage / of the supply voltage DC supply voltage / 1 / from backplane bus 5V supply voltage / external 24 V supply voltage / external / at DC / rated value 24 V relative positive tolerance / at DC / at 24 V 20 % relative negative tolerance / at DC / at 24 V 15 % consumed current ● from backplane bus / at DC / at 5 V / typical 0.15 A ● from external supply voltage / at DC / at 24 V / typical 0.25 A power loss [W] 6.75 W ambient conditions ambient temperature ● during operation 0 ... 60 °C ● during storage -40 ... +70 °C ● during transport -40 ... +70 °C relative humidity ● at 25 °C / without condensation / during operation / maximum protection class IP 95 % IP20 design, dimensions and weights module format Compact module S7-300 single width width 40 mm height 125 mm depth 120 mm net weight 0.3 kg product features, product functions, product components / general number of units 6GK73425DA030XE0 Page 1/3 5/8/2024 Subject to change without notice © Copyright Siemens ● per CPU / maximum 4 performance data / open communication number of possible connections / for open communication / by means of SEND/RECEIVE blocks / maximum 16 data volume ● as user data per connection / for open communication / by means of SEND/RECEIVE blocks / maximum 240 byte performance data / PROFIBUS DP service / as DP master ● DPV0 Yes number of DP slaves ● on DP master / operable 124 data volume ● of the address range of the inputs / as DP master / total 2160 byte ● of the address range of the outputs / as DP master / total 2160 byte ● of the address range of the inputs / per DP slave 244 byte ● of the address range of the outputs / per DP slave 244 byte ● of the address range of the diagnostic data / per DP slave 240 byte service / as DP slave ● DPV0 Yes data volume ● of the address range of the inputs / as DP slave / total 240 byte ● of the address range of the outputs / as DP slave / total 240 byte performance data / S7 communication number of possible connections / for S7 communication ● maximum 16 performance data / multi-protocol mode number of active connections / with multi-protocol mode ● without DP / maximum 32 ● with DP / maximum 28 performance data / telecontrol protocol / is supported ● TCP/IP No product functions / management, configuration, engineering configuration software ● required STEP 7 V5.1 SP2 or higher / STEP 7 Professional V12 (TIA Portal) or higher standards, specifications, approvals / hazardous environments certificate of suitability / CCC / for hazardous zone according to GB standard Yes; GB3836.1, GB3836.8 certificate of suitability / CCC / for hazardous zone according to GB standard / as marking Ex nA IIC T4 Gc standards, specifications, approvals / Environmental Product Declaration Environmental Product Declaration Yes Global Warming Potential [CO2 eq] ● total 229.03 kg ● during manufacturing 17.48 kg ● during operation 211.2 kg ● after end of life 0.35 kg further information / internet links internet link ● to website: Image database https://www.automation.siemens.com/bilddb ● to website: Industry Online Support https://support.industry.siemens.com security information security information 6GK73425DA030XE0 Page 2/3 Siemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial cybersecurity concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial cybersecurity measures that may be implemented, please visit 5/8/2024 Subject to change without notice © Copyright Siemens www.siemens.com/cybersecurity-industry. Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity RSS Feed under https://www.siemens.com/cert. (V4.7) Approvals / Certificates General Product Approval Manufacturer Declaration Declaration of Conformity For use in hazardous locations Marine / Shipping FM CCC-Ex Environment Confirmation last modified: 6GK73425DA030XE0 Page 3/3 3/22/2024 5/8/2024 Subject to change without notice © Copyright Siemens