6GK7542-5FX00-0XE0.

Data sheet product type designation 6GK7542-5FX00-0XE0 CP 1542-5 Communications processor CP 1542-5 for connection of SIMATIC S7-1500 to PROFIBUS DP, DPV1 master or DP slave, S7 and PG/OP communication, timeof-day synchronization, diagnostics, reduced quantity structure. transfer rate transfer rate ● at the 1st interface / according to PROFIBUS 9.6 kbit/s ... 12 Mbit/s interfaces number of interfaces / according to Industrial Ethernet 0 number of electrical connections ● at the 1st interface / according to PROFIBUS 1 type of electrical connection ● at the 1st interface / according to PROFIBUS 9-pin Sub-D socket (RS485) supply voltage, current consumption, power loss type of voltage / of the supply voltage DC supply voltage / 1 / from backplane bus 15 V relative symmetrical tolerance / at DC ● at 15 V 3% consumed current ● from backplane bus / at DC / at 15 V / typical power loss [W] 0.1 A 1.5 W ambient conditions ambient temperature ● for vertical installation / during operation 0 ... 40 °C ● for horizontally arranged busbars / during operation 0 ... 60 °C ● during storage -40 ... +70 °C ● during transport -40 ... +70 °C relative humidity ● at 25 °C / without condensation / during operation / maximum protection class IP 95 % IP20 design, dimensions and weights module format Compact module S7-1500 single width width 35 mm height 142 mm depth 129 mm net weight 0.27 kg fastening method ● S7-1500 rail mounting Yes product features, product functions, product components / general number of units ● per CPU / maximum 8 ● note depending on CPU type 6GK75425FX000XE0 Page 1/3 5/9/2024 Subject to change without notice © Copyright Siemens performance data / PROFIBUS DP service / as DP master ● DPV1 Yes number of DP slaves ● on DP master / operable 32 data volume ● of the address range of the inputs / as DP master / total 2048 byte ● of the address range of the outputs / as DP master / total 2048 byte ● of the address range of the inputs / per DP slave 244 byte ● of the address range of the outputs / per DP slave 244 byte service / as DP slave ● DPV0 Yes ● DPV1 Yes data volume ● of the address range of the inputs / as DP slave / total 240 byte ● of the address range of the outputs / as DP slave / total 240 byte performance data / S7 communication number of possible connections / for S7 communication ● maximum 16; depending on the system upper limit performance data / multi-protocol mode number of active connections / with multi-protocol mode 16 performance data / telecontrol protocol / is supported ● TCP/IP No product functions / management, configuration, engineering configuration software ● required STEP 7 Professional V12 SP1 (TIA Portal) or higher identification & maintenance function ● I&M0 - device-specific information Yes ● I&M1 - higher level designation/location designation Yes product functions / diagnostics product function / web-based diagnostics Yes; via S7-1500 CPU product functions / time product function / pass on time synchronization Yes standards, specifications, approvals / hazardous environments certificate of suitability / CCC / for hazardous zone according to GB standard Yes; GB3836.1, GB3836.8 certificate of suitability / CCC / for hazardous zone according to GB standard / as marking Ex nA IIC T4 Gc standards, specifications, approvals / Environmental Product Declaration Environmental Product Declaration Yes Global Warming Potential [CO2 eq] ● total 115.52 kg ● during manufacturing 21.24 kg ● during operation 93.93 kg ● after end of life 0.35 kg further information / internet links internet link ● to website: Image database https://www.automation.siemens.com/bilddb ● to website: Industry Online Support https://support.industry.siemens.com security information security information 6GK75425FX000XE0 Page 2/3 Siemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial cybersecurity concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial cybersecurity measures that may be implemented, please visit www.siemens.com/cybersecurity-industry. Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly 5/9/2024 Subject to change without notice © Copyright Siemens recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity RSS Feed under https://www.siemens.com/cert. (V4.7) Approvals / Certificates General Product Approval Manufacturer Declaration Declaration of Conformity For use in hazardous locations Marine / Shipping FM Marine / Shipping CCC-Ex Environment Confirmation last modified: 6GK75425FX000XE0 Page 3/3 3/22/2024 5/9/2024 Subject to change without notice © Copyright Siemens