ESDAVLC6-2BLY

ESDAVLC6-2BLY Datasheet Automotive transient voltage suppressor (TVS) in SOT23-3L Features • • • • • AEC-Q101 qualified Dual-line ESD and EOS protection Bidirectional device Max. pulse power: 140 W (8/20 µs) Low clamping factor VCL/VBR • Low leakage current • • ECOPACK®2 compliant Complies with the standard ISO 10605 - C = 150 pF, R = 330 Ω – ±13 kV (air discharge) – ±13 kV (contact discharge) Complies with the standard ISO 10605 - C = 330 pF, R = 330 Ω – ±10 kV (air discharge) – ±10 kV (contact discharge) Complies with the standard ISO 10605 - C = 330 pF, R = 2 kΩ – ±30 kV (air discharge) – ±30 kV (contact discharge) Complies with the standard ISO 7637-3 – Fast transient pulse 3a: Vs = -150 V • 1 3 • 2 • – Product status link ESDAVLC6-2BLY Fast transient pulse 3b: Vs = +150 V – Slow transient pulse 2a: Vs = -85 V – Slow transient pulse 2a: Vs = +85 V Product summary Order code ESDAVLC6-2BLY Package SOT23-3L Packing Tape and reel Application • Automotive interfaces Description The ESDAVLC6-2BLY is a dual-line Transil specifically designed for the protection of the automotive buses lines against electrostatic discharge (ESD). Thanks to its low capacitance, this product is compliant with all key interfaces in automotive applications. DS12754 - Rev 2 - October 2018 For further information contact your local STMicroelectronics sales office. www.st.com ESDAVLC6-2BLY Characteristics 1 Characteristics Table 1. Absolute ratings (Tamb = 25 °C) Symbol Parameter Value Unit ISO 10605 - C = 150 pF, R = 330 Ω: Contact discharge 13 Air discharge 13 ISO 10605 - C = 330 pF, R = 330 Ω: VPP Peak pulse voltage Contact discharge 10 Air discharge 10 ISO 10605 - C = 330 pF, R = 2 kΩ: 30 Contact discharge 30 Air discharge PPP kV Peak pulse power dissipation (8/20 μs) Tj initial = Tamb 140 W 5.5 A IPP Peak pulse current (8/20 μs) Tj Operating junction temperature range -55 to +150 °C Storage temperature range -55 to +150 °C Tstg Figure 1. Electrical characteristics (definitions) Table 2. Electrical characteristics (values, Tamb = 25 °C) Symbol Test conditions Min. Typ. Max. Unit 10 V nA VBR IR = 1 mA IR VRM = 5 V 100 At IPP = 1 A - 8/20 μs 12 At IPP = 4 A - 8/20 μs 17 VCL CI/O-GND ΔCI/O-GND fC VI/O = 0 V, f = 1 MHz, VOSC = 30 mV S21 = -3 dB αT(1) 6 0.95 0.01 1.2 V pF 3 GHz 9 10-4/°C 1. VBR at Tj = VBR at 25 °C x (1 + αT x (Tj– 25)) DS12754 - Rev 2 page 2/11 ESDAVLC6-2BLY Characteristics (curves) 1.1 Characteristics (curves) Figure 2. Leakage current versus junction temperature 100 Figure 3. Junction capacitance versus reverse applied voltage IR (nA) 2 C(pF) 1.5 10 1 0.5 1 Tj (°C) 25 50 75 100 125 150 0 VR(V) 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Figure 4. ESD response to ISO10605-C = 150 pF, R = 330 Ω Figure 5. ESD response to ISO10605-C = 150 pF, R = 330 Ω (+8 kV contact discharge) (-8 kV contact discharge) Figure 6. TLP Figure 7. S21 attenuation TLP 40 I(A) 30 20 10 -60 -40 -20 0 V(V) 0 20 40 60 -10 -20 -30 -40 DS12754 - Rev 2 page 3/11 ESDAVLC6-2BLY Characteristics (curves) Figure 8. Fast transient pulse 3a (Us = -150 V) Figure 9. Fast transient pulse 3b (Us = +150 V) Figure 10. Slow transient pulse 2a (Us = - 85 V) Figure 11. Slow transient pulse 2a (Us = + 85 V) DS12754 - Rev 2 page 4/11 ESDAVLC6-2BLY Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 2.1 SOT23-3L package information Figure 12. SOT23-3L package outline B L 3 E H 1 2 e S c e1 D 0.25 Gauge plane A a Seating plane L1 A1 L Table 3. SOT23-3L package mechanical data Dimensions Ref. Inches(1) Millimeters Min. Typ. Max. Min. Typ. Max. A 0.89 1.40 0.0350 0.0551 A1 0.00 0.10 0.0000 0.0039 B 0.30 0.51 0.0118 0.0201 C 0.085 0.18 0.0033 0.0071 D 2.75 3.04 0.1083 0.1197 e 0.85 1.05 0.0335 0.0413 e1 1.70 2.10 0.0669 0.0827 E 1.20 1.75 0.0472 0.0689 H 2.10 3.00 0.0827 0.1181 L 0.60 0.0236 S 0.35 0.65 0.0138 0.256 L1 0.25 0.55 0.0098 0.0217 a 0° 8° 0° 8° 1. Dimension in inches are given for reference only. DS12754 - Rev 2 page 5/11 ESDAVLC6-2BLY SOT23-3L package information Figure 13. SOT23-3L marking Figure 14. SOT23-3L footprint in mm (inches) 2.42 0.97 0.73 XXXX 2.89 0.79 0.395 1.05 XXXX : Marking 0.48 Figure 15. Package orientation in reel Figure 16. Tape and reel orientation Pin 1 located according to EIA-481 Note: Pocket dimensions are not on scale Pocket shape may vary depending on package Figure 17. 7'' reel dimension values Figure 18. Inner box dimension values 30 Ø 180 max 14.4 2±0.5 Ø 13 Ø 60 Ø 20.2 min 205 205 DS12754 - Rev 2 page 6/11 ESDAVLC6-2BLY SOT23-3L package information Figure 19. Tape outline Table 4. Tape dimension values Dimensions Ref. DS12754 - Rev 2 Millimeters Min. Typ. Max. D0 1.45 1.5 1.6 D1 1 F 3.45 3.5 3.55 K0 1.3 1.4 1.5 P0 3.9 4.0 4.1 P1 3.9 4.0 4.1 P2 1.95 2.0 2.05 W 7.9 8 8.3 page 7/11 ESDAVLC6-2BLY Reflow profile 2.3 Reflow profile Figure 20. ST ECOPACK® recommended soldering reflow profile for PCB mounting 250 240-245 °C Temperature (°C) -2 °C/s 2 - 3 °C/s 60 sec (90 max) 200 -3 °C/s 150 -6 °C/s 100 0.9 °C/s 50 Time (s) 0 Note: DS12754 - Rev 2 30 60 90 120 150 180 210 240 270 300 Minimize air convection currents in the reflow oven to avoid component movement. Maximum soldering profile corresponds to the latest IPC/JEDEC J-STD-020. page 8/11 ESDAVLC6-2BLY Ordering information 3 Ordering information Figure 21. Ordering information scheme ESDA VLC 6 - 2 B L Y ESD array Very low capacitance Breakdown voltage 6 = 6 Volts min Number of lines Directional B = Bidirectional Package L = SOT23-3L Automotive Table 5. Ordering information DS12754 - Rev 2 Order code Marking Package Weight Base qty. Delivery mode ESDAVLC6-2BLY C06Y SOT23-3L 10 mg 3000 Tape and reel page 9/11 ESDAVLC6-2BLY Revision history Table 6. Document revision history DS12754 - Rev 2 Date Version Changes 28-Sep-2018 1 Initial release. 18-Oct-2018 2 Updated Table 2. Electrical characteristics (values, Tamb = 25 °C). page 10/11 ESDAVLC6-2BLY IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS12754 - Rev 2 page 11/11