STB20NM60-1

STB20NM60-1 - STP20NM60FP STB20NM60 - STP20NM60 - STW20NM60 N-channel 600V - 0.25Ω - 20A - TO-247 - TO-220/FP - D2/I2PAK MDmesh™ Power MOSFET Features Type VDSS RDS(on) ID 600V 600V 600V 600V 600V < 0.29Ω < 0.29Ω < 0.29Ω < 0.29Ω < 0.29Ω 20A 20A 20A 20A 20A 3 STP20NM60 STP20NM60FP STB20NM60 STB20NM60-1 STW20NM60 ■ High dv/dt and avalanche capabilities ■ 100% avalanche tested ■ Low input capacitance and gate charge ■ Low gate input resistance 1 D²PAK TO-247 3 1 TO-220FP 3 1 2 TO-220 Applications ■ 2 Figure 1. 3 12 I²PAK Internal schematic diagram Switching applications Description The MDmesh™ is a new revolutionary Power MOSFET technology that associates the multiple drain process with the company’s PowerMESH™ horizontal layout. The resulting product has an outstanding low on-resistance, impressively high dv/dt and excellent avalanche characteristics. The adoption of the company’s proprietary strip technique yields overall dynamic performance that is significantly better than that of similar competition’s products. Table 1. Device summary Part number Marking Package Packaging STP20NM60 P20NM60 TO-220 Tube STP20NM60FP P20NM60FP TO-220FP Tube STB20NM60T4 B20NM60 D²PAK Tape & reel STB20NM60-1 B20NM60-1 I²PAK Tube STW20NM60 W20NM60 TO-247 Tube August 2007 Rev 12 1/18 www.st.com 18 Contents STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/18 ................................................ 9 STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter TO-220/D²PAK I²PAK/TO-247 VDS Drain-source voltage (VGS = 0) 600 VGS Gate- source voltage ±30 ID Drain current (continuous) at TC = 25°C 20 ID Drain current (continuous) at TC = 100°C 12.6 IDM (2) PTOT dv/dt (3) V V 20 (1) 12.6 (1) 80 (1) A A Drain current (pulsed) 80 Total dissipation at TC = 25°C 192 45 W Derating factor 1.5 0.36 W/°C Peak diode recovery voltage slope VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25°C) Tstg Storage temperature Tj Unit TO-220FP 15 V/ns -- 2500 Max. operating junction temperature A V -65 to 150 °C 150 °C 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD < 20A, di/dt < 400A/µs, VDD < V(BR)/DSS, Tj < TJMAX Table 3. Symbol Thermal resistance Parameter TO-220/D²PAK I²PAK/TO-247 TO-220FP Unit 0.65 2.8 °C/W Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-ambient max 62.5 °C/W Tl Maximum lead temperature for soldering purpose 300 °C Max. value Unit Table 4. Symbol Avalanche data Parameter IAS Avalanche current, repetitive or notrepetitive (pulse width limited by Tj max) 10 A EAS Single pulse avalanche energy (starting Tj = 25 °C, ID = IAS, VDD = 50 V) 650 mJ 3/18 Electrical characteristics 2 STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 5. Symbol On/off states Test conditions Min. Drain-source breakdown voltage ID = 250 µA, VGS = 0 600 IDSS Zero gate voltage drain current (VGS = 0) VDS = Max rating VDS= Max rating,@125°C IGSS Gate-body leakage current (VDS = 0) VGS = ± 30V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source on resistance VGS = 10V, ID = 10 A V(BR)DSS Table 6. Parameter 3 Typ. 1 10 µA µA ±100 nA 4 5 V 0.25 0.29 Ω Typ. Max. Unit Dynamic Parameter Test conditions gfs (1) Forward transconductance VDS > ID(on) x RDS(on)max, ID = 10 A Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS = 25V, f = 1 MHz, VGS = 0 1500 350 35 Equivalent output capacitance VGS = 0V, VDS = 0V to 480 V 215 Total gate charge Gate-source charge Gate-drain charge VDD = 480 V, ID = 20 A, VGS = 10V (see Figure 16) 39 10 20 Gate input resistance f = 1 MHz Gate DC bias=0 Test signal level = 20 mV open drain 1.6 Qg Qgs Qgd Rg Unit V Symbol Coss eq. (2) Max. Min. 11 S pF pF pF pF 54 nC nC nC 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. 4/18 Ω STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Table 7. Symbol td(on) tr td(off) tf Table 8. Symbol ISD ISDM (1) VSD (2) trr Qrr IRRM trr Qrr IRRM Electrical characteristics Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions Min. Typ. Max. 25 20 42 11 VDD = 300 V, ID = 10 A RG = 4.7Ω VGS = 10 V (see Figure 15) Unit ns ns ns ns Source drain diode Parameter Test conditions Min Typ. Source-drain current Source-drain current (pulsed) Max Unit 20 80 A A 1.5 V Forward on voltage ISD = 20 A, VGS = 0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD =20A, di/dt=100A/µs, VDD = 60 V (see Figure 20) 390 5 25 ns µC A Reverse recovery time Reverse recovery charge Reverse recovery current ISD =20A, di/dt=100A/µs, Tj = 150°C, VDD = 60 V (see Figure 20) 510 6.5 26 ns µC A 1. Pulse width limited by safe operating area 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % 5/18 Electrical characteristics STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220 / D²PAK / I²PAK Figure 3. Thermal impedance for TO-220 / D²PAK / I²PAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Output characterisics Figure 7. Transfer characteristics 6/18 STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Figure 8. Transconductance Figure 9. Electrical characteristics Static drain-source on resistance Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations Figure 12. Normalized gate threshold voltage vs temperature Figure 13. Normalized on resistance vs temperature 7/18 Electrical characteristics STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Figure 14. Source-drain diode forward characteristics 8/18 STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 3 Test circuit Test circuit Figure 15. Switching times test circuit for resistive load Figure 16. Gate charge test circuit Figure 17. Test circuit for inductive load Figure 18. Unclamped inductive load test switching and diode recovery times circuit Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform 9/18 Package mechanical data 4 STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/18 STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Package mechanical data TO-247 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.85 5.15 0.19 0.20 A1 2.20 2.60 0.086 0.102 b 1.0 1.40 0.039 0.055 b1 2.0 2.40 0.079 0.094 0.134 b2 3.0 3.40 0.118 c 0.40 0.80 0.015 0.03 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 e 5.45 L 14.20 14.80 0.560 L1 3.70 4.30 0.14 L2 0.620 0.214 18.50 0.582 0.17 0.728 øP 3.55 3.65 0.140 0.143 øR 4.50 5.50 0.177 0.216 S 5.50 0.216 11/18 Package mechanical data STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 12/18 TYP 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Package mechanical data TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 13/18 Package mechanical data STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 TO-220FP MECHANICAL DATA mm. DIM. MIN. inch TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 B D A E L7 L3 L6 F2 H G G1 F F1 L7 L2 14/18 L5 1 2 3 L4 STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 E 8 10 E1 0.315 10.4 0.393 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0.4 0º 0.015 4º 3 V2 1 15/18 Packaging mechanical data 5 STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A DIM. mm MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 MAX. 0.153 0.161 P0 3.9 4.1 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 * on sales type 16/18 inch 0.933 0.956 MIN. 330 B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA inch MAX. MAX. 12.992 0.059 13.2 0.504 0.520 26.4 0.960 1.039 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 6 Revision history Revision history Table 9. Document revision history Date Revision Changes 26-Jul-2004 8 First Release 17-Feb-2005 9 Insert the TO-247 package 25-Oct-2006 10 The document has been reformatted 18-Dec-2006 11 Text updates on Table 5. 27-Aug-2007 12 Updated Figure 2 and Figure 4 17/18 STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18