STB20NM60D
N-channel 600V - 0.26Ω - 20A - D2PAK
FDmesh™ Power MOSFET
General features
Type
VDSS
RDS(on)
ID
Pw
STB20NM60D
600V
ID(on) x RDS(on)max,
ID = 10A
Ciss
Coss
Crss
Input capacitance
Output capacitance
Reverse transfer capacitance
Coss eq. (2) Equivalent output capacitance
Min
Typ Max Unit
9
S
VDS = 25V, f = 1 MHz, VGS = 0
1300
500
35
pF
pF
pF
VGS = 0V, VDS = 0V to 480V
190
pF
Ω
RG
Gate input resistance
f=1 MHz Gate DC Bias = 0
Test signal level = 20mV
open drain
2.7
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 480V, ID = 20A,
VGS = 10V
(see Figure 13)
37
10
17
52
1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %
2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS
increases from 0 to 80%
4/13
Ω
nC
nC
nC
STB20NM60D
Electrical characteristics
Table 6.
Symbol
Switching times
Parameter
Test condictions
Min.
Typ.
Max. Unit
td(on)
tr
Turn-on delay time
Rise time
VDD = 300V, ID = 10A
RG = 4.7Ω VGS = 10V
(see Figure 12)
25
12
ns
ns
tr(Voff)
tf
tc
Off-voltage rise time
Fall time
Cross-over time
VDD = 480 V, ID = 20A,
RG = 4.7Ω, VGS = 10V
(see Figure 12)
8
22
30
ns
ns
ns
Table 7.
Symbol
ISD
ISDM
(1)
VSD (2)
trr
Qrr
IRRM
trr
Qrr
IRRM
Source drain diode
Parameter
Test condictions
Min
Typ.
Source-drain current
Source-drain current (pulsed)
Max
Unit
20
80
A
A
1.5
V
Forward on voltage
ISD = 20 A, VGS = 0
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD = 20 A, Tj = 25°C
di/dt =100A/µs,VDD=60V
(see Figure 17)
240
1800
16
ns
nC
A
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD = 20 A, Tj = 150°C
di/dt =100A/µs,VDD=60V
(see Figure 17)
396
2960
20
ns
nC
A
1. Pulse width limited by safe operating area
2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.
5/13
Electrical characteristics
STB20NM60D
2.1
Electrical characteristics (curves)
Figure 1.
Safe operating area
Figure 2.
Thermal impedance
Figure 3.
Output characterisics
Figure 4.
Transfer characteristics
Figure 5.
Transconductance
Figure 6.
Static drain-source on resistance
6/13
STB20NM60D
Electrical characteristics
Figure 7.
Gate charge vs gate-source voltage Figure 8.
Figure 9.
Normalized gate threshold voltage
vs temperature
Capacitance variations
Figure 10. Normalized on resistance vs
temperature
Figure 11. Source-drain diode forward
characteristics
7/13
Test circuit
3
STB20NM60D
Test circuit
Figure 12. Switching times test circuit for
resistive load
Figure 13. Gate charge test circuit
Figure 14. Test circuit for inductive load
Figure 15. Unclamped inductive load test
switching and diode recovery times
circuit
Figure 16. Unclamped inductive waveform
8/13
Figure 17. Switching time waveform
STB20NM60D
4
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
9/13
Package mechanical data
STB20NM60D
D2PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
inch
DIM.
MAX.
MIN.
A
MIN.
4.4
TYP
4.6
0.173
TYP.
0.181
MAX.
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.6
0.017
0.023
C2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
D1
E
8
10
10.4
0.393
4.88
5.28
0.192
0.208
E1
G
0.368
0.315
8.5
0.334
L
15
15.85
0.590
0.625
L2
1.27
1.4
0.050
0.055
L3
1.4
1.75
0.055
0.068
M
2.4
3.2
0.094
0.126
R
0.4
0º
0.015
4º
3
V2
1
10/13
STB20NM60D
5
Packaging mechanical data
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
24.4
N
100
T
TAPE MECHANICAL DATA
DIM.
mm
inch
MIN.
MAX.
MIN.
A0
10.5
10.7
0.413 0.421
B0
15.7
15.9
0.618 0.626
D
1.5
1.6
0.059 0.063
D1
1.59
1.61
0.062 0.063
E
1.65
1.85
0.065 0.073
F
11.4
11.6
0.449 0.456
K0
4.8
5.0
0.189 0.197
P0
3.9
4.1
0.153 0.161
P1
11.9
12.1
0.468 0.476
P2
1.9
2.1
0.075 0.082
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
26.4
0.960 1.039
0.059
0795
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
1000
MAX.
R
50
1.574
T
0.25
0.35 0.0098 0.0137
W
23.7
24.3
0.933 0.956
* on sales type
11/13
Revision history
6
STB20NM60D
Revision history
Table 8.
12/13
Revision history
Date
Revision
08-Jun-2006
1
Changes
First release
STB20NM60D
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
13/13
很抱歉,暂时无法提供与“STB20NM60D”相匹配的价格&库存,您可以联系我们找货
免费人工找货