STBR6012WY

STBR6012-Y Automotive high voltage rectifier for bridge applications Datasheet - production data A Description K The high quality design of this diode results in a device with consistently reproducible characteristics and intrinsic ruggedness. These characteristics make it ideal for heavy duty applications that demand long term reliability like automotive applications. Thanks to its ultra-low conduction losses, this diode is especially suitable for use as input bridge diode in battery chargers. A K Table 1: Device summary DO-247 Symbol Features        AEC-Q101 qualified Ultra-low conduction losses Ultra-low reverse losses High junction temperature capability VRRM guaranteed from -40 to +175 °C ECOPACK®2 compliant component PPAP capable November 2016 IF(AV) 60 A VRRM 1200 V VF (typ.) 0.95 V Tj -40 to +175 °C DocID029942 Rev 1 This is information on a product in full production. Value 1/8 www.st.com Characteristics 1 STBR6012-Y Characteristics Table 2: Absolute ratings (limiting values at 25 °C, unless otherwise specified) Symbol Parameter Value Unit VRSM Non-repetitive surge reverse voltage 1500 V VRRM Repetitive peak reverse voltage 1200 V IF(RMS) Forward rms current 90 A IF(AV) Average forward current TC = 135 °C, δ = 0.5 square wave 60 A IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 500 A Tstg Storage temperature range -65 to +175 °C Operating junction temperature range -40 to +175 °C Max. value Unit 0.45 °C/W Tj Tj = -40 °C to +175 °C Table 3: Thermal parameters Symbol Rth(j-c) Parameter Junction to case Table 4: Static electrical characteristics Symbol Parameter Test conditions IR(1) Reverse leakage current VF(2) Forward voltage drop Tj = 25 °C Tj = 150 °C Tj = 25 °C Tj = 150 °C VR = VRRM IF = 60 A Notes: (1)Pulse test: tp = 5 ms, δ < 2% (2)Pulse test: tp = 380 µs, δ < 2% To evaluate the conduction losses, use the following equation: P = 0.96 x IF(AV) + 0.004 x IF2(RMS) 2/8 DocID029942 Rev 1 Min. Typ. - Max. 5 - 25 250 - 1.05 1.3 - 0.95 1.2 Unit µA V STBR6012-Y Characteristics Characteristics (curves) Figure 1: Average forward power dissipation versus average forward current 100 Figure 2: Forward voltage drop versus forward current (typical values) P(W) δ = 0.5 80 1.0E+03 δ= 1 IFM(A) 1.0E+02 δ = 0.2 Tj = 150 °C δ = 0.1 60 1.0E+01 δ = 0.05 40 Tj = 25 °C 1.0E+00 T 1.0E-01 20 δ = tp/T IF(AV)(A) tp VFM(V) 1.0E-02 0.0 0 0 10 20 30 40 50 60 70 80 Figure 3: Forward voltage drop versus forward current (maximum values) 1.0E+03 IFM(A) 1.0 1.5 Figure 4: Relative variation of thermal impedance junction to case versus pulse duration 1.0 0.9 1.0E+02 0.5 Zth(j-c) /Rth(j-c) Single pulse 0.8 Tj = 150 °C 0.7 1.0E+01 Tj = 25 °C 0.6 0.5 1.0E+00 0.4 0.3 1.0E-01 0.2 VFM(V 1.0E-02 0.0 0.1 0.5 1.0 1.5 2.0 t P(s) 0.0 1.E-03 1.E-02 1.E-01 1.E+00 Figure 5: Junction capacitance versus reverse voltage applied (typical values) 1000 C(pF) F = 1 MHz Vosc = 30 mVRMS Tj = 25 °C 100 VR(V) 10 1 10 100 DocID029942 Rev 1 1000 10000 3/8 Package information 2 STBR6012-Y Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.     4/8 Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.55 N·m Maximum torque value: 1.0 N·m DocID029942 Rev 1 Package information STBR6012-Y 2.1 DO-247 package information Figure 6: DO-247 package outline DocID029942 Rev 1 5/8 Package information STBR6012-Y Table 5: DO-247 package mechanical data Dimensions Ref. Millimeters Min. Max. Min. Max. A 4.85 5.15 0.191 0.203 D 2.20 2.60 0.086 0.102 E 0.40 0.80 0.015 0.031 F 1.00 1.40 0.039 0.055 F2 F3 2.00 typ. 2.00 G 0.078 typ. 2.40 0.078 10.90 typ. 0.094 0.429 typ. H 15.45 15.75 0.608 0.620 L 19.85 20.15 0.781 0.793 L1 3.70 4.30 0.145 0.169 L2 L3 18.50 typ. 14.20 0.728 typ. 14.80 0.559 0.582 L4 34.60 typ. 1.362 typ. L5 5.50 typ. 0.216 typ. M 2.00 V 3.00 0.078 5° V2 Dia. 6/8 Inches 5° 60° 3.55 0.118 60° 3.65 DocID029942 Rev 1 0.139 0.143 Ordering information STBR6012-Y 3 Ordering information Table 6: Ordering information 4 Order code Marking Package Weight Base qty. Delivery mode STBR6012WY STBR6012WY DO-247 4.4 g 30 Tube Revision history Table 7: Document revision history Date Revision 07-Nov-2016 1 Changes First issue. DocID029942 Rev 1 7/8 STBR6012-Y IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 8/8 DocID029942 Rev 1