STD90N4F3

STD90N4F3, STI90N4F3 STP90N4F3, STU90N4F3 N-channel 40 V, 5.0 mΩ, 80 A, DPAK, TO-220, IPAK, I2PAK STripFET™ III Power MOSFET Features Type ■ ■ VDSS RDS(on) max ID Pw STD90N4F3 40 V < 5.8mΩ 80 A 110 W STI90N4F3 40 V < 6.2 mΩ 80 A 110 W STP90N4F3 40 V < 6.2 mΩ 80 A 110 W STU90N4F3 40 V < 6.2 mΩ 80 A 110 W 3 3 1 2 1 DPAK IPAK Standard threshold drive 3 12 3 1 100% avalanche tested TO-220 2 I²PAK Application ■ Switching applications Figure 1. Internal schematic diagram Description This STripFET™ III Power MOSFET technology is among the latest improvements, which have been especially tailored to minimize on-state resistance providing superior switching performances. Table 1. Device summary Order codes Marking Package Packaging STD90N4F3 90N4F3 DPAK Tape & reel STI90N4F3 90N4F3 I²PAK Tube STP90N4F3 90N4F3 TO-220 Tube STU90N4F3 90N4F3 IPAK Tube July 2009 Doc ID 14212 Rev 3 1/16 www.st.com 16 Contents STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 .............................................. 8 Doc ID 14212 Rev 3 STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit 40 V ± 20 V Drain current (continuous) at TC = 25 °C 80 A Drain current (continuous) at TC = 100 °C 65 A Drain current (pulsed) 320 A Total dissipation at TC = 25 °C 110 W Derating factor 0.73 W/°C 8 V/ns Single pulse avalanche energy 400 mJ Operating junction temperature Storage temperature -55 to 175 °C VDS Drain-source voltage (VGS=0) VGS Gate-source voltage ID (1) ID IDM (2) PTOT dv/dt (3) EAS (4) Tj Tstg Peak diode recovery voltage slope 1. Current limited by package 2. Pulse width limited by safe operating area 3. ISD ≤ 80 A, di/dt ≤ 400A/µs, VDS ≤ V(BR)DSS, Tj ≤ Tjmax 4. Starting Tj = 25°C, ID = 40A, VDD = 30V Table 3. Thermal resistance Value Symbol Parameter TO-220 I²PAK Rthj-case Rthj-a Thermal resistance junction-case max Thermal resistance junction-ambient max 62.5 Unit IPAK 1.36 °C/W 100 °C/W Rthj-pcb (1) Thermal resistance junction-ambient max Tl Maximum lead temperature for soldering purpose DPAK 50 300 275 °C/W °C 1. When mounted on 1inch² FR-4 2Oz Cu board Doc ID 14212 Rev 3 3/16 Electrical characteristics 2 STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 4. Symbol Static Parameter Test conditions Drain-source breakdown voltage ID = 250 µA, VGS= 0 IDSS Zero gate voltage drain current (VGS = 0) VDS = Max rating, VDS = Max rating,Tc = 125°C 10 100 µA µA IGSS Gate body leakage current (VDS = 0) VGS = ±20 V ±200 nA VGS(th) Gate threshold voltage VDS= VGS, ID = 250 µA 4 V RDS(on) Static drain-source on resistance V(BR)DSS Table 5. Symbol gfs (1) 40 V 2 VGS= 10 V, ID= 40 A for DPAK 5.0 5.8 mΩ VGS= 10 V, ID= 40 A for IPAK, I²PAK, TO-220 5.4 6.2 mΩ Dynamic Parameter Test conditions Min Typ. Max. Unit Forward transconductance VDS =25 V, ID=40 A - 100 S Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS =25 V, f=1 MHz, VGS=0 - 2200 580 40 pF pF pF Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD=20 V, ID = 80 A VGS =10 V (see Figure 14) - 40 11 8 1. Pulsed: pulse duration = 300µs, duty cycle 1.5% 4/16 Min. Typ. Max. Unit Doc ID 14212 Rev 3 54 nC nC nC STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 Table 6. Symbol Electrical characteristics Switching on/off (inductive load) Parameter Test conditions Min. Typ. Max. Unit td(on) tr Turn-on delay time Rise time VDD=20 V, ID= 40 A, RG=4.7 Ω, VGS=10 V (see Figure 16) - 15 50 - ns ns td(off) tf Turn-off delay time Fall time VDD=20 V, ID= 40 A, RG=4.7 Ω, VGS=10 V (see Figure 16) - 40 15 - ns ns Min. Typ. Max. Unit - 80 320 A A 1.5 V Table 7. Symbol ISD ISDM (1) VSD (2) trr Qrr IRRM Source drain diode Parameter Test conditions Source-drain current Source-drain current (pulsed) Forward on voltage ISD=80 A, VGS=0 - Reverse recovery time Reverse recovery charge Reverse recovery current ISD=80 A, di/dt = 100 A/µs, VDD=30 V, Tj=150°C (see Figure 15) - 45 60 2.8 ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300 µs, duty cycle 1.5% Doc ID 14212 Rev 3 5/16 Electrical characteristics STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Static drain-source on resistance Figure 7. Normalized BVDSS vs temperature HV29000 RDS(on) (mΩ) 6.5 ID=40A VGS=10V 6.0 5.5 TO-220 DPAK 5.0 4.5 0 6/16 20 40 60 80 ID(A) Doc ID 14212 Rev 3 STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 Figure 8. Gate charge vs gate-source voltage Figure 9. Figure 10. Normalized gate threshold voltage vs temperature Electrical characteristics Capacitance variations Figure 11. Normalized on resistance vs temperature Figure 12. Source-drain diode forward characteristics Doc ID 14212 Rev 3 7/16 Test circuits 3 STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 Test circuits Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit VDD 12V 47kΩ 1kΩ 100nF 3.3 µF 2200 RL µF VGS IG=CONST VDD 100Ω Vi=20V=VGMAX VD RG 2200 µF D.U.T. D.U.T. VG 2.7kΩ PW 47kΩ 1kΩ PW AM01468v1 AM01469v1 Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit A A D.U.T. FAST DIODE B B L A D G VD L=100µH S 3.3 µF B 25 Ω 1000 µF D VDD 2200 µF 3.3 µF VDD ID G RG S Vi D.U.T. Pw AM01470v1 Figure 17. Unclamped inductive waveform AM01471v1 Figure 18. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 8/16 0 Doc ID 14212 Rev 3 10% AM01473v1 STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. Doc ID 14212 Rev 3 9/16 Package mechanical data STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 10/16 Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Doc ID 14212 Rev 3 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 Package mechanical data TO-251 (IPAK) mechanical data mm. DIM. min. typ max. A 2.20 2.40 A1 0.90 1.10 b 0.64 0.90 b2 0.95 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 E 6.40 6.60 e e1 2.28 4.40 4.60 H 16.10 L 9.00 (L1) 0.80 9.40 1.20 L2 0.80 V1 10 o 0068771_H Doc ID 14212 Rev 3 11/16 Package mechanical data STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 TO-252 (DPAK) mechanical data DIM. mm. min. typ max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 L1 2.80 L2 L4 0.80 0.60 1 R V2 0.20 8o 0o 0068772_G 12/16 Doc ID 14212 Rev 3 STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 Package mechanical data I²PAK (TO-262) mechanical data mm inch Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 Typ 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Doc ID 14212 Rev 3 Max Min 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 13/16 Packaging mechanical data 5 STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 12.1 0.476 1.6 0.059 0.063 B1 14/16 inch D 1.5 D1 1.5 E 1.65 1.85 0.065 0.073 F 7.4 7.6 0.291 0.299 0.059 K0 2.55 2.75 0.100 0.108 P0 3.9 4.1 0.153 0.161 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 R 40 W 15.7 0.075 0.082 1.574 16.3 0.618 0.641 Doc ID 14212 Rev 3 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 0.059 0.795 18.4 0.645 0.724 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 6 Revision history Revision history Table 8. Document revision history Date Revision Changes 29-Nov-2007 1 First release 15-Jul-2008 2 Added new package, mechanical data: I²PAK 23-Jul-2009 3 RDS(on) values have been revised Doc ID 14212 Rev 3 15/16 STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 Doc ID 14212 Rev 3