STGD3HF60HDT4

STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD 4.5 A, 600 V very fast IGBT with Ultrafast diode Datasheet - production data Features    Minimal tail current Low conduction and switching losses Ultrafast soft recovery antiparallel diode Applications  Motor drive Description Figure 1: Internal schematic diagram These devices are based on a new advanced planar technology concept to yield an IGBT with more stable switching performance (Eoff) versus temperature, as well as lower conduction losses. Table 1: Device summary Order code Marking Package Packing STGB3HF60HD GB3HF60HD D²PAK Tape and reel STGD3HF60HDT4 GD3HF60HD DPAK Tape and reel STGF3HF60HD GF3HF60HD TO-220FP Tube STGP3HF60HD GP3HF60HD TO-220 Tube September 2016 DocID17690 Rev 5 This is information on a product in full production. 1/26 www.st.com Contents STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Contents 1 Electrical ratings ............................................................................. 3 2 Electrical characteristics ................................................................ 4 2.1 Electrical characteristics (curves) ...................................................... 7 3 Test circuits ................................................................................... 10 4 Package information ..................................................................... 11 5 2/26 4.1 D²PAK (TO-263) package information ............................................ 11 4.2 D²PAK (TO-263) packing information .............................................. 14 4.3 DPAK (TO-252) type A package information................................... 16 4.4 DPAK (TO-252) packing information ............................................... 19 4.5 TO-220FP package information ...................................................... 21 4.6 TO-220 type A package information................................................ 23 Revision history ............................................................................ 25 DocID17690 Rev 5 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD 1 Electrical ratings Electrical ratings Table 2: Absolute maximum ratings Value Symbol Parameter Unit D2PAK DPAK TO-220FP TO-220 VCES Collector-emitter voltage (VGE = 0) 600 V IC(1) Continuous collector current at TC = 25 °C 7.5 A IC(1) Continuous collector current at TC = 100 °C 4.5 A (2) Turn-off latching current 18 A ICP(3) Pulsed collector current 18 A VGE Gate-emitter voltage ICL ± 20 V Diode RMS forward current at TC = 25 °C 10 A IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 25 A PTOT Total dissipation at TC = 25 °C TSTG Storage temperature range IF Tj 38 18 - 55 to 150 Operating junction temperature range W °C Notes: (1)Calculated 𝐼𝐶 (𝑇𝐶 ) = (2)V clamp (3)Pulse according to the iterative formula: 𝑇𝑗(𝑚𝑎𝑥)−𝑇𝐶 𝑅𝑡ℎ𝑗−𝑐 ×𝑉𝐶𝐸(𝑠𝑎𝑡)(𝑚𝑎𝑥)(𝑇𝑗(𝑚𝑎𝑥), 𝐼𝐶 (𝑇𝐶 )) = 80 %, (VCES), Tj = 150 °C, RG = 10 Ω, VGE = 15 V. width limited by maximum junction temperature range. Table 3: Thermal data Value Symbol Parameter D2PAK DPAK Rthj-case Rthj-amb TO-220 Unit TO-220FP Thermal resistance junction-case IGBT 3.3 6.9 °C/W Thermal resistance junction-case diode 5 8 °C/W Thermal resistance junction-ambient DocID17690 Rev 5 100 62.5 °C/W 3/26 Electrical characteristics 2 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Electrical characteristics (Tj=25 °C unless otherwise specified). Table 4: Static electrical characteristics Symbol V(BR)CES VCE(sat) VGE(th) Parameter Test conditions Collector-emitter breakdown voltage (VGE = 0) Collector-emitter saturation voltage Gate threshold voltage IC = 1 mA Typ. Unit V 1.4 VGE = 15 V, IC = 1.5 A 2.45 VGE = 15 V, IC = 1.5 A, Tj = 125 °C 1.85 VCE = VGE, IC = 250 µA Max. 600 VGE = 15 V, IC = 0.5 A, Tj = 125 °C V 5.75 V 250 µA VCE = 600 V, Tj = 125 °C 1 mA ± 100 nA Collector cut-off current (VGE = 0) IGES Gate-emitter leakage current (VCE = 0) VGE = ± 20 V Forward transconductance VCE = 15 V, IC = 1.5 A 3.75 2.95 VCE = 600 V ICES gfs Min. 1.5 S Table 5: Dynamic electrical characteristics Symbol Cies 4/26 Parameter Test conditions Input capacitance VCE = 25 V, f = 1 MHz, VGE = 0 Coes Output capacitance Cres Reverse transfer capacitance Qg Total gate charge Qge Gate-emitter charge Qgc Gate-collector charge VCE = 480 V, IC = 1.5 A, VGE = 15 V (see Figure 18: " Gate charge test circuit") DocID17690 Rev 5 Min. Typ. Max. Unit - 152 - pF - 14 - pF - 3 - pF - 12 - nC - 2 - nC - 6 - nC STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Electrical characteristics Table 6: Switching on/off (inductive load) Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope tr(Voff) Off voltage rise time td(off) Turn-off delay time tf Current fall time tr(Voff) Off voltage rise time td(off) Turn-off delay time tf Current fall time Test conditions Min. Typ. Max. Unit VCC = 400 V, IC = 1.5 A RG= 100 Ω, VGE = 15 V (see Figure 17: " Test circuit for inductive load switching"Figure 19: " Switching waveform") - 11 - ns - 4 - ns - 285 - A/µs VCC = 400 V, IC = 1.5 A RG = 100 Ω, VGE = 15 V, Tj = 125 °C (see Figure 17: " Test circuit for inductive load switching"Figure 19: " Switching waveform") - 10 - ns - 5 - ns - 265 - A/µs VCC = 400 V, IC = 1.5 A, RGE = 100 Ω, VGE = 15 V (see Figure 17: " Test circuit for inductive load switching"Figure 19: " Switching waveform") - 26 - ns - 60 - ns - 50 - ns VCC = 400 V, IC = 1.5 A, RGE = 100 Ω, VGE = 15 V, Tj = 125 °C (see Figure 17: " Test circuit for inductive load switching"Figure 19: " Switching waveform") - 64 - ns - 69 - ns - 71 - ns Test conditions Min. Typ. Max. Unit VCC = 400 V, IC = 1.5 A RG = 100 Ω, VGE = 15 V (see Figure 17: " Test circuit for inductive load switching"Figure 19: " Switching waveform") - 19 - µJ - 12 - µJ - 31 - µJ - 38 - µJ - 35 - µJ - 73 - µJ Table 7: Switching energy (inductive load) Symbol Parameter Eon(1) Turn-on switching energy Eoff(2) Ets Turn-off switching energy Ets Total switching energy Eon(1) Turn-on switching energy Eoff(2) Turn-off switching energy Ets Total switching energy VCC = 400 V, IC = 1.5 A RG = 100 Ω, VGE = 15 V, Tj = 125 °C (see Figure 17: " Test circuit for inductive load switching"Figure 19: " Switching waveform") Notes: (1)Eon is the turn-on energy when a typical diode is used in the test circuit in Figure 17: " Test circuit for inductive load switching". If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs and diode are at the same temperature (25 °C and 125 °C). (2)Turn-off energy include also the tail of the collector current. DocID17690 Rev 5 5/26 Electrical characteristics STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Table 8: Collector-emitter diode Symbol 6/26 Parameter Test conditions VF Forward on-voltage trr Reverse recovery time Qrr Reverse recovery charge Irrm Reverse recovery current trr Reverse recovery time Qrr Reverse recovery charge Irrm Reverse recovery current Min. Typ. Max. IF = 1.5 A - 1.4 1.8 IF = 1.5 A, Tj = 125 °C - 1.15 - 85 ns - 124 nC - 3 A - 114 ns - 194 nC - 3.5 A IF = 1.5 A, VR = 40 V, di/dt = 100 A/µs (see Figure 20: " Diode reverse recovery waveform") IF = 1.5 A,VR = 40 V, Tj = 125 °C, di/dt = 100 A/µs (see Figure 20: " Diode reverse recovery waveform") DocID17690 Rev 5 Unit V STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD 2.1 Electrical characteristics Electrical characteristics (curves) Figure 2: Output characteristics Figure 3: Output characteristic details Figure 4: Transfer characteristics Figure 5: Collector-emitter on voltage vs collector current Figure 6: Collector-emitter on voltage vs temperature Figure 7: Breakdown voltage vs temperature DocID17690 Rev 5 7/26 Electrical characteristics STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Figure 8: Gate threshold voltage vs temperature Figure 9: Gate charge vs gate-emitter voltage Figure 10: Capacitance variations Figure 11: Switching energy vs collector current Figure 12: Switching energy vs gate resistence Figure 13: Switching energy vs temperature 8/26 DocID17690 Rev 5 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Electrical characteristics Figure 14: Turn-off SOA Figure 15: Diode forward on voltage Figure 16: Thermal impedance 10 10 -5 10 -4 10 -3 10 -2 10 -1 tp (s) -2 10 -1 c 10 0 K CG34360 DocID17690 Rev 5 9/26 Test circuits 3 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Test circuits Figure 17: Test circuit for inductive load switching C A Figure 18: Gate charge test circuit A L=100 µH G E B B 3.3 µF C G + RG VCC 1000 µF D.U.T E - AM01504v 1 Figure 19: Switching waveform 10/26 DocID17690 Rev 5 Figure 20: Diode reverse recovery waveform STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD 4 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 4.1 D²PAK (TO-263) package information Figure 21: D²PAK (TO-263) type A package outline 0079457_A_rev22 DocID17690 Rev 5 11/26 Package information STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Table 9: D²PAK (TO-263) type A package mechanical data mm Dim. Min. Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 7.75 8.00 D2 1.10 1.30 1.50 E 10 E1 8.50 8.70 8.90 E2 6.85 7.05 7.25 e 10.40 2.54 e1 4.88 5.28 H 15 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 12/26 Typ. 0.4 0° DocID17690 Rev 5 8° STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Package information Figure 22: D²PAK (TO-263) recommended footprint (dimensions are in mm) DocID17690 Rev 5 13/26 Package information 4.2 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD D²PAK (TO-263) packing information Figure 23: Tape outline 14/26 DocID17690 Rev 5 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Package information Figure 24: Reel outline Table 10: D²PAK tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. Min. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 Max. 330 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base quantity 1000 P2 1.9 2.1 Bulk quantity 1000 R 50 T 0.25 0.35 W 23.7 24.3 DocID17690 Rev 5 13.2 26.4 30.4 15/26 Package information 4.3 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD DPAK (TO-252) type A package information Figure 25: DPAK (TO-252) type A package outline 0068772_A_21 16/26 DocID17690 Rev 5 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Package information Table 11: DPAK (TO-252) type A mechanical data mm Dim. Min. Typ. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 4.60 4.70 4.80 e 2.16 2.28 2.40 e1 4.40 4.60 H 9.35 10.10 L 1.00 1.50 (L1) 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 5.10 5.25 6.60 1.00 0.20 0° DocID17690 Rev 5 8° 17/26 Package information STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Figure 26: DPAK (TO-252) recommended footprint (dimensions are in mm) 18/26 DocID17690 Rev 5 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD 4.4 Package information DPAK (TO-252) packing information Figure 27: DPAK (TO-252) tape outline DocID17690 Rev 5 19/26 Package information STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Figure 28: DPAK (TO-252) reel outline Table 12: DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 20/26 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 DocID17690 Rev 5 18.4 22.4 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD 4.5 Package information TO-220FP package information Figure 29: TO-220FP package outline DocID17690 Rev 5 21/26 Package information STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Table 13: TO-220FP package mechanical data mm Dim. Min. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 22/26 Typ. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 DocID17690 Rev 5 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD 4.6 Package information TO-220 type A package information Figure 30: TO-220 type A package outline DocID17690 Rev 5 23/26 Package information STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD Table 14: TO-220 type A mechanical data mm Dim. Min. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 D1 24/26 Typ. 15.75 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.95 DocID17690 Rev 5 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD 5 Revision history Revision history Table 15: Document revision history Date Revision 29-Jun-2010 1 First release. 09-Sep-2010 2 Some values changed in Table 2. 22-Dec-2010 3 Document status promoted from preliminary data to datasheet. 24-Sep-2013 4 Added device in TO-220. Updated Table 1: Device summary, Table 3: Thermal data and Section 4: Package mechanical data accordingly. 5 Added the order codes STGB3HF60HD and STGF3HF60HD. Added TO-220FP and D²PAK packages. Updated Table 1: "Device summary", Section 1: "Electrical ratings", Section 4: "Package information". Minor text changes. 19-Sep-2016 Changes DocID17690 Rev 5 25/26 STGB3HF60HD, STGD3HF60HDT4, STGF3HF60HD, STGP3HF60HD IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 26/26 DocID17690 Rev 5