STP100N10F7

STB100N10F7, STD100N10F7, STF100N10F7 STI100N10F7, STP100N10F7 Datasheet N-channel 100 V, 6.8 mΩ typ., 80 A STripFET F7 Power MOSFETs in D2PAK, DPAK, TO-220FP, I2PAK and TO-220 packages TAB Features TAB 2 3 1 3 1 D2PAK TAB TAB ID Package STB100N10F7 80 A D2PAK STD100N10F7 80 A DPAK 45 A TO-220FP STI100N10F7 80 A I2PAK STP100N10F7 80 A TO-220 Order codes DPAK STF100N10F7 1 2 TO-220FP 3 12 3 I2PAK 1 2 3 TO-220 D(2, TAB) G(1) VDS 100 V RDS(on) max. 8.0 mΩ • Among the lowest RDS(on) on the market • • Excellent FoM (figure of merit) Low Crss/Ciss ratio for EMI immunity • High avalanche ruggedness Applications • Switching applications S(3) AM01475v1_noZen Description These N-channel Power MOSFETs utilize STripFET F7 technology with an enhanced trench gate structure that results in very low on-state resistance, while also reducing internal capacitance and gate charge for faster and more efficient switching. Product status links STB100N10F7 STD100N10F7 STF100N10F7 STI100N10F7 STP100N10F7 DS9291 - Rev 6 - March 2022 For further information contact your local STMicroelectronics sales office. www.st.com STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Value Symbol D2PAK Parameter DPAK TO-220FP I2PAK Unit TO-220 VDS Drain-source voltage 100 V VGS Gate-source voltage ±20 V Drain current (continuous) at TC = 25 °C ID IDM(2) PTOT(1) 80 45(1) 80 A Drain current (continuous) at TC = 100 °C 62 32(1) 70 A Drain current (pulsed) 320 180 320 A Total power dissipation at TC = 25 °C 120 30 150 W Insulation withstand voltage (RMS) from all three leads VISO to external heatsink 2.5 kV (t = 1 s, TC = 25 °C) TJ Operating junction temperature Tstg °C -55 to 175 Storage temperature range °C 1. This value is limited by package. 2. Pulse width is limited by safe operating area. Table 2. Thermal resistance Value Symbol Parameter RthJC Thermal resistance, junction-to-case RthJA Thermal resistance, junction-to-ambient (1) RthJB Thermal resistance, junction-to-board D2PAK DPAK TO-220FP 1 1.25 5 30 I2PAK Unit TO-220 1 °C/W 62.5 °C/W 50 °C/W 1. When mounted on an 1-inch2 FR-4 board, 2oz CU, t < 10 s. Table 3. Avalanche characteristics Symbol EAS DS9291 - Rev 6 Parameter Single pulse avalanche energy (TJ = 25 °C, L = 3.5 mH, IAS = 15 A, VDD = 50 V, VGS = 10 V) Value Unit 400 mJ page 2/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 Electrical characteristics 2 Electrical characteristics TCASE = 25 °C unless otherwise specified. Table 4. On-/off-states Test conditions Symbol D2PAK, DPAK Parameter I2PAK, TO-220 V(BR)DSS Drain-source breakdown voltage TO-220FP ID = 250 μA, VGS = 0 V Min. Typ. 100 IDSS 1 µA 100 µA 100 nA 4.5 V 6.8 8.0 mΩ Min. Typ. Max. Unit - 4369 - pF - 823 - pF - 36 - pF VDS = 100 V, VGS = 0 V, TC = 125 °C(1) IGSS Gate-body leakage current VGS = 20 V, VDS = 0 V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 μA RDS(on) Static drain-source onresistance VGS = 10 V, VGS = 10 V, ID = 40 A ID = 22.5 A Unit V VDS = 100 V, VGS = 0 V Zero gate voltage drain current Max. 2.5 1. Defined by design, not subject to production test. Table 5. Dynamic Symbol Parameter Test conditions Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Qg Total gate charge VDD = 50 V, ID = 80 A, - 61 - nC Gate-source charge VGS = 0 to 10 V - 26 - nC Gate-drain charge (see Figure 17. Test circuit for gate charge behavior) - 13 - nC Min. Typ. Max. Unit Qgs Qgd VDS = 50 V, f = 1 MHz, VGS = 0 V Table 6. Switching times Symbol td(on) tr td(off) tf DS9291 - Rev 6 Parameter Test conditions Turn-on delay time VDD = 50 V, ID = 40 A, - 27 - ns Rise time RG = 4.7 Ω, VGS = 10 V - 40 - ns Turn-off delay time (see Figure 16. Test circuit for resistive load switching times and Figure 21. Switching time waveform) - 46 - ns - 15 - ns Fall time page 3/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 Electrical characteristics Table 7. Source-drain diode Symbol ISD ISDM (1) VSD(2) Parameter Test conditions Min. Typ. Max. Unit Source-drain current - 80 A Source-drain current (pulsed) - 320 A 1.2 V Forward on voltage ISD = 80 A, VGS = 0 V - trr Reverse recovery time ISD = 80 A, di/dt = 100 A/µs - 77 ns Qrr Reverse recovery charge VDD = 80 V, TJ = 150 °C - 146 nC IRRM Reverse recovery current (see Figure 18. Test circuit for inductive load switching and diode recovery times) - 4 A 1. Pulse width is limited by safe operating area. 2. Pulsed: pulse duration = 300 µs, duty cycle 1.5% DS9291 - Rev 6 page 4/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 Electrical characteristics (curves) 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for DPAK Figure 2. Thermal impedance for DPAK AM15754v1 ) on D S( O Li p e r m at ite io d ni by n m th is ax a R re a is ID (A) 100 100µs 10 Zth= k*R thJC δ = tp /Ƭ 1ms 1 Tj=175°C Tc=25°C S ingle puls e 0.1 0.1 10 1 10ms 100 tp Ƭ VDS (V) Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP AM15755v1 ) on D S( O pe m ratio ite n d by in th m is ax ar R ea is ID (A) Li 100 10 100µs Zth= k*R thJC δ = tp /Ƭ 1ms 1 Tj=175°C Tc=25°C Single pulse 0.1 0.1 10 1 10ms 100 Ƭ VDS(V) Figure 5. Safe operating area for D2PAK, I2PAK and TO-220 AM15756v1 Figure 6. Thermal impedance for D2PAK, I2PAK and TO-220 K δ=0.5 AM15761v1 ) on D S( O Li p e r m at ite io d ni by n m th is ax a R re a is ID (A) tp 100 0.2 0.05 0.02 0.01 0.1 10 100µs 10 -1 Zth= k*R thJC δ = tp /Ƭ 1ms 1 S ingle puls e Tj=175°C Tc=25°C S ingle puls e 0.1 0.1 DS9291 - Rev 6 1 10 10ms 100 VDS (V) tp 10 Ƭ -2 10 -5 10 -4 10 -3 10 -2 10 -1 t (s ) p page 5/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 Electrical characteristics (curves) Figure 8. Transfer characteristics Figure 7. Output characteristics AM15757v1 ID (A) VGS=10V 300 250 8V 200 200 7V 150 150 100 100 6V 50 50 5V 0 VDS=5V 300 9V 250 AM15745v1 ID (A) 0 2 1 3 4 VDS(V) Figure 9. Normalized V(BR)DSS vs temperature AM15747v1 V(BR)DSS (norm) ID=250 µA 1.04 0 2 3 4 5 6 7 8 9 10 VGS(V) Figure 10. Static drain-source on-resistance AM15748v1 RDS(on) (mΩ) 14.0 VGS=10V 12.0 1.02 10.0 8.0 1 6.0 0.98 4.0 0.96 2.0 0.94 -55 -30 0.0 -5 20 70 45 95 120 TJ(°C) Figure 11. Gate charge vs gate-source voltage AM15758v1 VGS (V) VDD=50V 12 0 20 40 60 80 100 ID(A) Figure 12. Capacitance variations AM15759v1 C (pF) 5000 ID=80A 10 Ciss 4000 8 3000 6 2000 4 1000 2 0 DS9291 - Rev 6 0 20 40 60 Qg (nC) 0 0 10 20 30 40 50 60 70 80 Coss Crss VDS(V) page 6/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 Electrical characteristics (curves) Figure 13. Normalized gate threshold voltage vs temperature Figure 14. Normalized on-resistance vs temperature AM15760v2 RDS(on) AM15746v1 VGS(th) (norm) (norm) 2 1.04 ID = 40 A VGS = 10 V 1.8 ID= 250 µA 1.02 1.6 1 1.4 1.2 0.98 1 0.96 0.8 0.6 0.94 0.92 -55 -30 -5 20 45 70 95 120 0.4 -55 -30 -5 TJ(°C) 20 45 70 95 120 TJ(°C) Figure 15. Source-drain diode forward characteristics AM15749v1 VSD (V) TJ=-55°C 1.1 1 0.9 TJ=25°C 0.8 0.7 TJ=150°C 0.6 0.5 0 DS9291 - Rev 6 20 40 60 80 100 ISD(A) page 7/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 Test circuits 3 Test circuits Figure 16. Test circuit for resistive load switching times Figure 17. Test circuit for gate charge behavior VDD 12 V 2200 + μF 3.3 μF VDD VD VGS 1 kΩ 100 nF RL IG= CONST VGS RG 47 kΩ + pulse width D.U.T. 2.7 kΩ 2200 μF pulse width D.U.T. 100 Ω VG 47 kΩ 1 kΩ AM01469v1 AM01468v1 Figure 18. Test circuit for inductive load switching and diode recovery times D G A D.U.T. S 25 Ω A A L 100 µH fast diode B B B G RG VD 3.3 µF D + Figure 19. Unclamped inductive load test circuit 1000 + µF 2200 + µF VDD 3.3 µF VDD ID D.U.T. S _ D.U.T. Vi pulse width AM01470v1 AM01471v1 Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform ton V(BR)DSS td(on) toff td(off) tr tf VD 90% 90% IDM VDD VDD VGS 0 AM01472v1 DS9291 - Rev 6 10% 0 ID VDS 10% 90% 10% AM01473v1 page 8/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 4.1 D²PAK (TO-263) type A package information Figure 22. D²PAK (TO-263) type A package outline 0079457_26 DS9291 - Rev 6 page 9/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 D²PAK (TO-263) type A package information Table 8. D²PAK (TO-263) type A package mechanical data Dim. mm Min. Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 7.75 8.00 D2 1.10 1.30 1.50 E 10.00 E1 8.30 8.50 8.70 E2 6.85 7.05 7.25 e 10.40 2.54 e1 4.88 5.28 H 15.00 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 DS9291 - Rev 6 Typ. 0.40 0° 8° page 10/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 D²PAK (TO-263) type A package information Figure 23. D²PAK (TO-263) recommended footprint (dimensions are in mm) 0079457_Rev26_footprint DS9291 - Rev 6 page 11/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 DPAK (TO-252) type A2 package information 4.2 DPAK (TO-252) type A2 package information Figure 24. DPAK (TO-252) type A2 package outline 0068772_type-A2_rev30 DS9291 - Rev 6 page 12/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 DPAK (TO-252) type A2 package information Table 9. DPAK (TO-252) type A2 mechanical data Dim. mm Min. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 5.10 5.20 5.30 e 2.159 2.286 2.413 e1 4.445 4.572 4.699 H 9.35 10.10 L 1.00 1.50 L1 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 DS9291 - Rev 6 Typ. 5.10 5.25 6.60 1.00 0.20 0° 8° page 13/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 DPAK (TO-252) type A2 package information Figure 25. DPAK (TO-252) recommended footprint (dimensions are in mm) FP_0068772_30 DS9291 - Rev 6 page 14/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 DPAK (TO-252) type C package information 4.3 DPAK (TO-252) type C package information Figure 26. DPAK (TO-252) type C package outline 0068772_C_30 DS9291 - Rev 6 page 15/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 DPAK (TO-252) type C package information Table 10. DPAK (TO-252) type C mechanical data Dim. mm Min. Typ. Max. A 2.20 2.30 2.38 A1 0.90 1.01 1.10 A2 0.00 0.10 b 0.72 0.85 b4 5.13 c 0.47 0.60 c2 0.47 0.60 D 6.00 D1 5.25 E 6.50 E1 4.70 e 5.46 6.10 6.20 6.60 6.70 2.186 2.286 2.386 H 9.80 10.10 10.40 L 1.40 1.50 1.70 L1 L2 2.90 REF 0.90 L3 L4 1.25 0.51 BSC 0.60 L6 DS9291 - Rev 6 5.33 0.80 1.00 1.80 BSC θ1 5° 7° 9° θ2 5° 7° 9° V2 0° 8° page 16/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 DPAK (TO-252) type C package information Figure 27. DPAK (TO-252) recommended footprint (dimensions are in mm) FP_0068772_30 DS9291 - Rev 6 page 17/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 D²PAK and DPAK packing information 4.4 D²PAK and DPAK packing information Figure 28. Tape outline DS9291 - Rev 6 page 18/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 D²PAK and DPAK packing information Figure 29. Reel outline T 40mm min. access hole at slot location B D C N A G measured at hub Tape slot in core for tape start 2.5mm min.width Full radius AM06038v1 Table 11. D²PAK tape and reel mechanical data Tape Dim. DS9291 - Rev 6 Reel mm mm Dim. Min. Max. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base quantity 1000 P2 1.9 2.1 Bulk quantity 1000 R 50 T 0.25 0.35 W 23.7 24.3 330 13.2 26.4 30.4 page 19/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 D²PAK and DPAK packing information Table 12. DPAK tape and reel mechanical data Tape Dim. mm mm Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 B1 D DS9291 - Rev 6 Reel 1.5 Min. Max. 330 13.2 D1 1.5 G 16.4 E 1.65 1.85 N 50 18.4 F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 22.4 page 20/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 TO-220FP package information 4.5 TO-220FP package information Figure 30. TO-220FP package outline 7012510_Rev_13_B DS9291 - Rev 6 page 21/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 TO-220FP package information Table 13. TO-220FP package mechanical data Dim. mm Min. Max. A 4.40 4.60 B 2.50 2.70 D 2.50 2.75 E 0.45 0.70 F 0.75 1.00 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.20 G1 2.40 2.70 H 10.00 10.40 L2 DS9291 - Rev 6 Typ. 16.00 L3 28.60 30.60 L4 9.80 10.60 L5 2.90 3.60 L6 15.90 16.40 L7 9.00 9.30 Dia 3.00 3.20 page 22/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 I²PAK package information 4.6 I²PAK package information Figure 31. I²PAK package outline 0004982_Rev_9 DS9291 - Rev 6 page 23/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 I²PAK package information Table 14. I²PAK package mechanical data Dim. DS9291 - Rev 6 mm Min. Typ. Max. A 4.40 - 4.60 A1 2.40 - 2.72 b 0.61 - 0.88 b1 1.14 - 1.70 c 0.49 - 0.70 c2 1.23 - 1.32 D 8.95 - 9.35 e 2.40 - 2.70 e1 4.95 - 5.15 E 10.00 - 10.40 L 13.00 - 14.00 L1 3.50 - 3.93 L2 1.27 - 1.40 page 24/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 TO-220 type A package information 4.7 TO-220 type A package information Figure 32. TO-220 type A package outline 0015988_typeA_Rev_23 DS9291 - Rev 6 page 25/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 TO-220 type A package information Table 15. TO-220 type A package mechanical data Dim. mm Min. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.95 Slug flatness DS9291 - Rev 6 Typ. 0.03 0.10 page 26/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 Ordering information 5 Ordering information Table 16. Order codes Order code Package Packing STB100N10F7 D2PAK Tape and reel STD100N10F7 DPAK Tape and reel TO-220FP Tube STI100N10F7 I2PAK Tube STP100N10F7 TO-220 Tube STF100N10F7 DS9291 - Rev 6 Marking 100N10F7 page 27/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 Revision history Table 17. Document revision history Date Version 05-Oct-2012 1 Changes Initial release. Inserted device in TO-220FP. 07-Feb-2013 2 Updated title and features on the cover page, Table 1: Device summary, Table 2: Absolute maximum ratings, Table 3: Thermal resistance and Table 5: On/off states accordingly. Updated Table 6: Dynamic, Table 7: Switching times, Table 8: Source drain diode and Section 4: Package mechanical data. Added Section 5: Packaging mechanical data. Modified: the entire typical values in Table 6, tf typical value in Table 7, VSD and typical values for trr, qrr, IRRM 29-Apr-2013 3 Inserted: Table 4: Avalanche characteristics and Section 2.1: Electrical characteristics (curves) Minor text changes Inserted device in D2PAK. 25-Nov-2013 4 Updated title and features on the cover page, Table 1: Device summary, Table 2: Absolute maximum ratings, Table 3: Thermal resistance and Table 5: On/off states accordingly. Updated Table 6: Dynamic, Section 4: Package mechanical data and Section 5: Packaging mechanical data. Added STI100N10F7 device and updated the document accordingly. Removed maturity status indication, updated title, features and description on 18-Jun-2018 5 cover page. Updated Table 1. Absolute maximum ratings. Updated Section 4 Package information. Minor text changes. 02-Mar-2022 DS9291 - Rev 6 6 Updated Section 4 Package information. Minor text changes. page 28/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5 4.1 D²PAK (TO-263) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 DPAK (TO-252) type A2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4.3 DPAK (TO-252) type C package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.4 D²PAK and DPAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 4.5 TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4.6 I²PAK package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.7 TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 DS9291 - Rev 6 page 29/30 STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2022 STMicroelectronics – All rights reserved DS9291 - Rev 6 page 30/30