STTH8L06G-TR

STTH8L06 Turbo 2 ultrafast high voltage rectifier Features K ■ Ultrafast switching ■ Low reverse recovery current ■ Low thermal resistance ■ Reduces switching and conduction losses ■ Package insulation voltage: – TO-220AC Ins: 2500 V rms – TO-220FPAC: 2000 V DC K TO-220AC STTH8L06D K TO-220FPAC STTH8L06FP K A Description NC The STTH8L06, which is using ST Turbo2 600 V technology, is specially suited as boost diode in discontinuous or critical mode power factor corrections. The device is also intended for use as a free wheeling diode in power supplies and other power switching applications. February 2012 A A D2PAK STTH8L06G Table 1. Doc ID 8373 Rev 6 K A TO-220AC Insulated STTH8L06DIRG Device summary Symbol Value IF(AV) 8A VRRM 600 V IR (max) 200 µA Tj 175 °C VF (typ) 0.85 V trr (typ) 75 ns 1/11 www.st.com 11 Characteristics STTH8L06 1 Characteristics Table 2. Absolute ratings (limiting values) Symbol VRRM Parameter Repetitive peak reverse voltage 2 IF(RMS) IF(AV) Forward rms current Average forward current δ = 0.5 Value Unit 600 V TO-220AC / TO-220FPAC / D PAK 30 TO-220AC Ins. 24 TO-220AC / D2PAK Tc = 150 °C TO-220FPAC Tc = 125 °C TO-220AC Ins. Tc = 135 °C A 8 IFSM Surge non repetitive forward current 120 A Tstg Storage temperature range -65 to 175 °C Operating junction temperature range -40 to 175 °C Value (max) Unit Tj Table 3. tp = 10 ms sinusoidal A Thermal resistance Symbol Parameter TO-220AC / D2PAK Rth(j-c) Table 4. Symbol Junction to case 2.5 TO-220FPAC 5 TO-220AC Ins. 4 °C/W Static electrical characteristics Parameter IR Reverse leakage current VF Forward voltage drop Test conditions Tj = 25 °C Tj = 150 °C Tj = 25 °C Tj = 150 °C Min. Typ. Max. Unit 8 VR = VRRM µA 16 200 1.3 IF = 8 A V 0.85 1.05 To evaluate the conduction losses use the following equation: P = 0.89 x IF(AV) + 0.022 IF2(RMS) Table 5. Symbol trr IRM tfr VFP 2/11 Dynamic characteristics Parameter Typ. Max. Unit IF = 1 A, dIF/dt = -50 A/µs VR = 30 V 75 105 ns Reverse T = 125 °C recovery current j IF = 8 A, dIF/dt = 100 A/µs, VR = 400 V 7.2 10 A Forward recovery time IF = 8 A, dIF/dt = 100 A/µs VFR = 1.1 x VFmax 150 ns 6 V Reverse recovery time Forward recovery voltage Test conditions Tj = 25 °C Tj = 25°C IF = 8 A, dIF/dt = 100 A/µs Doc ID 8373 Rev 6 Min. STTH8L06 Figure 1. Characteristics Conduction losses versus average current Figure 2. Forward voltage drop versus forward current IFM(A) P(W) 100.0 11 δ = 0.1 δ = 0.05 10 δ = 0.2 δ = 0.5 Tj=150°C (maximum values) 9 δ=1 10.0 7 Tj=25°C (maximum values) Tj=150°C (typical values) 8 6 5 4 1.0 3 T 2 1 IF(AV)(A) δ=tp/T 0 0 2 Figure 3. 4 6 VFM(V) tp 0.1 8 10 0.0 Relative variation of thermal Figure 4. impedance junction to case versus pulse duration (TO-220FPAC) 1.0 0.9 0.9 0.8 0.8 0.7 0.7 0.6 0.6 0.5 0.5 0.4 0.4 T 0.1 3.0 1.E-02 Single pulse T δ=tp/T 1.E-01 tp(s) tp δ=tp/T 0.0 1.E+00 1.E+01 Peak reverse recovery current versus dIF/dt (typical values) 1.E-03 1.E-02 Figure 6. tp 1.E-01 1.E+00 Reverse recovery time versus dIF/dt (typical values) trr(ns) IRM(A) 1000 VR=400V Tj=125°C 13 2.5 Relative variation of thermal impedance junction to case versus pulse duration 0.1 tp(s) 0.0 14 2.0 0.2 Single pulse Figure 5. 1.5 (TO-220AC, TO-220AC Ins, D2PAK) 0.3 0.3 1.E-03 1.0 Zth(j-c)/Rth(j-c) Zth(j-c)/Rth(j-c) 1.0 0.2 0.5 VR=400V Tj=125°C 900 IF=2 x IF(AV) 12 800 11 IF=IF(AV) 10 700 IF=0.5 x IF(AV) 9 600 8 7 IF=2 x IF(AV) 500 IF=0.25 x IF(AV) 6 IF=IF(AV) 400 5 4 300 3 200 IF=0.5 x IF(AV) 2 1 100 dIF/dt(A/µs) 0 dIF/dt(A/µs) 0 0 20 40 60 80 100 120 140 160 180 200 0 Doc ID 8373 Rev 6 20 40 60 80 100 120 140 160 180 200 3/11 Characteristics Figure 7. STTH8L06 Reverse recovery charges versus dIF/dt (typical values) Figure 8. Qrr(nC) Softness factor versus dIF/dt (typical values) S factor 1000 2.0 VR=400V Tj=125°C 900 IF=2 x IF(AV) IF≤2 x IF(AV) VR=400V Tj=125°C 1.8 800 1.6 IF=IF(AV) 700 1.4 600 1.2 IF=0.5 x IF(AV) 500 1.0 400 0.8 300 0.6 0.4 200 100 0.2 dIF/dt(A/µs) dIF/dt(A/µs) 0.0 0 0 20 Figure 9. 40 60 80 100 120 140 160 180 0 200 Relative variations of dynamic parameters versus junction temperature 25 50 75 100 125 150 175 200 Figure 10. Transient peak forward voltage versus dIF/dt (typical values) VFP(V) 1.25 7 S factor IF=IF(AV) Tj=125°C 6 1.00 5 IRM 0.75 4 QRR 0.50 3 IF≤ 2 x IF(AV) VR=400V Reference: Tj=125°C 0.25 2 1 Tj(°C) dIF/dt(A/µs) 0.00 25 50 75 100 125 0 0 Figure 11. Forward recovery time versus dIF/dt (typical values) 20 40 60 80 100 120 140 160 180 200 Figure 12. Junction capacitance versus reverse voltage applied (typical values) tfr(ns) C(pF) 300 1000 IF=IF(AV) VFR=1.1 x VF max. Tj=125°C 250 F=1MHz VOSC=30mVRMS Tj=25°C 200 100 150 100 10 50 dIF/dt(A/µs) 0 4/11 VR(V) 1 0 20 40 60 80 100 120 140 160 180 200 1 Doc ID 8373 Rev 6 10 100 1000 STTH8L06 Characteristics Figure 13. Thermal resistance junction to ambient versus copper surface under tab (D2PAK) Rth(j-a)(°C/W) 70 epoxy FR4, Cu = 35 µm 60 50 40 30 20 10 S(Cu)(cm²) 0 0 5 10 15 20 25 Doc ID 8373 Rev 6 30 35 40 5/11 Package information 2 STTH8L06 Package information ● Epoxy meets UL94, V0 ● Cooling method: by conduction (C) ● Recommended torque value: 0.4 N·m to 0.6 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 6. TO-220AC dimensions Dimensions Ref. Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 A H2 ØI C L5 L7 L6 L2 F1 Millimeters D L9 L2 L4 F M 16.40 typ. 0.645 typ. L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 E G M Diam. I 6/11 Doc ID 8373 Rev 6 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 STTH8L06 Package information Table 7. TO-220FPAC dimensions Dimensions Ref. A Millimeters Inches Min. Max. Min. Max. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.018 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 B H Dia L6 L7 L2 L3 L5 F1 D L2 L4 F E G1 G Doc ID 8373 Rev 6 16 Typ. 0.63 Typ. L3 28.6 30.6 1.126 1.205 L4 9.8 10.6 0.386 0.417 L5 2.9 3.6 0.114 0.142 L6 15.9 16.4 0.626 0.646 L7 9.00 9.30 0.354 0.366 Dia. 3.00 3.20 0.118 0.126 7/11 Package information Table 8. STTH8L06 TO-220AC (Nins. & Ins. 20-up) dimensions Dimensions Ref. Millimeters Min. A ØI 15.20 a1 C B b2 L Typ. Max. Inches Min. Typ. 15.90 0.598 3.75 Max. 0.625 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 4.80 5.40 0.189 0.212 F 6.20 6.60 0.244 0.259 ØI 3.75 3.85 0.147 0.151 I4 15.80 16.40 16.80 0.622 0.646 0.661 L 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 F A I4 c2 a1 l2 a2 M b1 c1 e M 8/11 Doc ID 8373 Rev 6 2.60 0.102 STTH8L06 Package information Table 9. D2PAK dimensions Dimensions Ref. A E C2 L2 D L L3 A1 B2 R C B G A2 M * V2 * FLAT ZONE NO LESS THAN 2mm Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.14 1.70 0.045 0.067 C 0.45 0.60 0.017 0.024 C2 1.23 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 E 10.00 10.40 0.393 0.409 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.40 0.050 0.055 L3 1.40 1.75 0.055 0.069 M 2.40 3.20 0.094 0.126 R V2 0.40 typ. 0° 0.016 typ. 8° 0° 8° Figure 14. Footprint (dimensions in mm) 16.90 10.30 5.08 1.30 8.90 Doc ID 8373 Rev 6 3.70 9/11 Ordering information 3 STTH8L06 Ordering information Table 10. Ordering information Order code Marking Package Weight Base qty Delivery mode STTH8L06D STTH8L06D TO-220AC STTH8L06G 4 50 Tube 1.48 g 50 Tube 2 D PAK STTH8L066G-TR STTH8L06G D PAK 1.48 g 1000 Tape and reel STTH8L06FP STTH8L06FP TO-220FPAC 1.70 g 50 Tube STTH8L06DIRG STTH8L06DI TO-220AC Ins. 1.86 g 50 Tube Revision history Table 11. 10/11 STTH8L06G 1.90 g 2 Document revision history Date Revision Changes Nov-2002 2A 18-Oct-2004 3 TO-220AC Insulated and D2PAK packages added 13-Jun-2005 4 Tj changed from value 175 to range -40 to 175 °C - Page1 10-Aug-2006 5 Reformatted to current standard. Added package insulation voltage data on page 1. Changed order code STTH8L06DI to STTH8L06DIRG. 07-Feb-2012 6 Added IRM to Table 4. Last issue Doc ID 8373 Rev 6 STTH8L06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 8373 Rev 6 11/11