TN1605H-6FP

TN1605H-6FP High temperature 16 A SCRs Datasheet − production data Applications $ • Voltage regulator circuits for motorbikes • Inrush current limiting circuits • Motor control circuits and starters • Light dimmers * • Solid state relays . Description Thanks to a junction temperature up to 150 °C and an insulated TO-220FPAB package, the TN1605H-6FP offers high thermal performance up to 16 A rms. The trade-off between the device's noise immunity (dV/dt = 200 V/µs), its gate triggering current (IGT = 6 mA) and its turn-on current rise (dI/dt = 100 A/µs) allows the design of robust and compact control circuits for voltage regulators in motorbikes and industrial drives, overvoltage crowbar protection, motor control circuits in power tools and kitchen appliances, and inrush current limiting circuits. * . $ 72)3$% Features • High junction temperature: Tj = 150 °C • High noise immunity dV/dt = 200 V/µs up to 150 °C The insulated fullpack package allows a back-to-back configuration. • Gate triggering current IGT = 6 mA Table 1. Device summary • Blocking voltage VDRM/VRRM = 600 V Order code • High turn on current rise dI/dt: 100 A/µs Package TN1605H-6FP TO-220FPAB • ECOPACK®2 compliant component VDRM/VRRM IGT 600 V 6 mA • Complies with UL standards (File ref: E81734) • Insulated package TO-220FPAB: – Insulated voltage: 2000 VRMS February 2015 This is information on a product in full production. DocID027546 Rev 1 1/9 www.st.com 9 Characteristics 1 TN1605H-6FP Characteristics Table 2. Absolute ratings Symbol IT(RMS) IT(AV) ITSM I ²t dI/dt VDRM, VRRM IGM Parameter On-state rms current (180° conduction angle) Average on-state current (180° conduction angle) Tc = 83 °C 16 A Tc = 83 °C 10 Tc = 102 °C 8 Tc = 117 °C 6 A t = 8.3ms 153 t = 10 ms 140 I²t value for fusing (Tj initial = 25 °C) tp = 10 ms 98 A ²s Critical rate of rise of on-state current IG = 2 x IGT, tr ≤ 100 ns, Tj = 25 °C f = 60 Hz 100 A/µs 600 V Tj = 150 °C 4 A Tj = 150 °C 1 W - 40 to + 150 - 40 to + 150 °C 260 °C 2000 V A Repetitive peak off-state voltage tp = 20 µs Average gate power dissipation Tstg Tj Storage junction temperature range Operating junction temperature range TL Maximum lead temperature for soldering during 10 s Vins Unit Non repetitive surge peak on-state current (Tj initial = 25 °C) Peak gate current PG(AV) Value Insulation rms voltage, 1 minute TO-220FPAB Table 3. Electrical characteristics (Tj = 25 °C, unless otherwise specified) Symbol IGT Value VD = 12 V, RL = 33 Ω Unit Min. 3.5 Typ. 4.5 Max. 6 Max. 1.3 V Min. 0.2 V mA VGT VD = 12 V, RL = 33 Ω VGD VD = VDRM, RL = 3.3 kΩ IH IT = 500 mA, gate open Max. 20 mA IL IG = 1.2 x IGT Max. 40 mA Min. 200 V/µs Typ 1.9 µs Typ 70 µs dV/dt 2/9 Test conditions VD = 402 V, gate open tgt IT = 32 A, VD = 600 V, IG = 100 mA, (dIG/dt)max = 0.2 A/µs tq VD = 402 V, VR = 25 V, IT = 16 A, (dIG/dt)max = 30A/µs, dVD/dt = 40 V/µs DocID027546 Rev 1 Tj = 150 °C Tj = 150 °C Tj = 150 °C TN1605H-6FP Characteristics Table 4. Static characteristics Symbol Test conditions Value Unit VTM ITM = 32 A, tp = 380 µs Tj = 25 °C Max. 1.6 V Vt0 Threshold voltage Tj = 150 °C Max. 0.82 V Rd Dynamic resistance Tj = 150 °C Max. 25 mΩ 5 µA 1.5 mA Value Unit IDRM, IRRM Tj = 25 °C VD = VDRM, VR = VRRM Max. Tj = 150 °C Table 5. Thermal resistance Symbol Parameter Rth(j-c) Junction to case (AC) 4.5 °C/W Rth(j-a) Junction to ambient (DC) 60 °C/W Figure 1. Maximum power dissipation versus average on-state current  3:   Į ƒ  Į ƒ   Į ƒ Į ƒ   Į ƒ Į ƒ Į ƒ       ,7$9 $ Į  Į ƒ  ƒ   7Fƒ&   Figure 3. Average and DC on-state current versus ambient temperature  '&  Į ƒ  ,7 $ $9  '& Į ƒ   Figure 2. Average and DC on-state current versus case temperature        Figure 4. Relative variation of thermal impedance versus pulse duration . >=WK5WK@ ( ,7$9 $ = WKMF  '&  =WKMD Į ƒ (    W3V 7Dƒ&         ( ( ( ( ( ( ( ( DocID027546 Rev 1 3/9 Characteristics TN1605H-6FP Figure 5. Relative variation of gate triggering current and gate voltage versus junction temperature (typical values) Figure 6. Relative variation of holding current and latching current versus junction temperature (typical values) ,*79*7>7M@,*79*7>7M ƒ&@  ,+,/ >7M@,+,/ >7M ƒ&@    ,/ ,*7   ,+   9*7     7Mƒ&         Figure 7. Relative variation of static dV/dt immunity versus junction temperature (typical values)  7Mƒ&           Figure 8. Surge peak on-state current versus number of cycles ,760$  G9GW>7M@G9GW>7M ƒ&@ 9' 95 9 1RQUHSHWLWLYH7M ƒ&  WS PV $ERYHWHVWHTXLSPHQWFDSDELOLW\  2QHF\FOH     5HSHWLWLYH7F ƒ&   7Mƒ&    1XPEHURIF\FOHV       Figure 9. Non-repetitive surge peak on-state current for a sinusoidal pulse (tp < 10 ms) , $  760 ,70$ 7 LQLWLDO ƒ& M   Figure 10. On-state characteristics (maximum values)  GOGWOLPLWDWLRQ$—V  7MPD[ 9W 9 5G Pȍ  ,760   7M ƒ&   4/9 W PV S    7M ƒ&   DocID027546 Rev 1   9  9 70  TN1605H-6FP Characteristics Figure 11. Relative variation of leakage current versus junction temperature (tp < 10 ms) ( ,'50,550>7M@,'50,550>7M ƒ&@ 9'50 9550 9 ( ( ( (  7Mƒ&    DocID027546 Rev 1   5/9 Package information 2 TN1605H-6FP Package information • Epoxy meets UL94, V0 • Lead-free package • Halogen free molding compound • Recommended torque: 0.4 to 0.6 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Figure 12. TO-220FPAB dimension definitions $ % + 'LD / / / / / ) / ) ) * * 6/9 ' DocID027546 Rev 1 ( TN1605H-6FP Package information Table 6. TO-220FPAB dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.018 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.70 0.045 0.067 F2 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 Typ. 0.63 Typ. L3 28.6 30.6 1.126 1.205 L4 9.8 10.6 0.386 0.417 L5 2.9 3.6 0.114 0.142 L6 15.9 16.4 0.626 0.646 L7 9.00 9.30 0.354 0.366 Dia. 3.00 3.20 0.118 0.126 DocID027546 Rev 1 7/9 Ordering information 3 TN1605H-6FP Ordering information Figure 13. Ordering information scheme 71+)3 6HULHV 71 6&5 5PVFXUUHQW  $ *DWHVHQVLWLYLW\  P$ +LJKWHPSHUDWXUH 9ROWDJH  9 3DFNDJH )3 72)3$% 'HOLYHU\PRGH %ODQN WXEH Table 7. Ordering information 4 Order code Marking Package Weight Base qty Delivery mode TN1605H-6FP TN1605H6 TO-220FPAB 2.0 g 50 Tube Revision history Table 8. Document revision history 8/9 Date Revision 24-Feb-2015 1 Changes Initial release. DocID027546 Rev 1 TN1605H-6FP IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved DocID027546 Rev 1 9/9