Si1040X
www.vishay.com
Vishay Siliconix
Load Switch with Level-Shift
FEATURES
SC-89 (6 leads)
S2
ON/OFF 4
R1, C1 5
• TrenchFET® power MOSFET
• 1.8 V to 8 V input
6
• 1.5 V to 8 V logic level control
• Smallest LITTLE FOOT® package: 1.6 mm x 1.6 mm
1
R2
Top View
• 2000 V ESD protection on input switch, VON/OFF
3
D2
2
D2
• Adjustable slew-rate
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Marking code: P
PRODUCT SUMMARY
VDS2 (V)
4
8
RDS(on) max. () at VGS = 4.5 V
0.625
RDS(on) max. () at VGS = 2.5 V
0.890
RDS(on) max. () at VGS = 1.8 V
1.250
ID (A)
± 0.43
Configuration
2, 3
S2
D2
Q2
6
R1, C1
Level-Shift
DESCRIPTION
Q1
5
ON/OFF
The Si1040X includes a p- and n-channel MOSFET in a
single SC-89-6 package. The low on-resistance p-channel
TrenchFET is tailored for use as a load switch. The
n-channel, with an external resistor, can be used as a
level-shift to drive the p-channel load-switch. The n-channel
MOSFET has internal ESD protection and can be driven by
logic signals as low as 1.5 V. The Si1040X operates on
supply lines from 1.8 V to 8 V, and can drive loads up to
0.43 A.
1
R2
ORDERING INFORMATION
Package
SC-89
Lead (Pb)-free and halogen-free
Si1040X-T1-GE3
TYPICAL APPLICATION CIRCUIT
20
Switching Variation R2 at V IN = 2.5 V, R1 = 20 kΩ
2, 3
4
VOUT
VIN
Q2
tf
16
R1
C1
6
Time (µs)
6
5
ON/OFF
Co
IL = 0.36 A
VON/OFF = 3 V
Ci = 10 µF
Co = 1 µF
12
8
tr
LOAD
Q1
td(off)
4
td(on)
Ci
1
0
0
R2
R2
S10-2544-Rev. D, 08-Nov-10
GND
2
4
6
8
10
R2 (kΩ)
Note: For R2 switching variations with other VIN/R1
combinations See Typical Characteristics
Document Number: 71809
1
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Si1040X
www.vishay.com
Vishay Siliconix
COMPONENTS
R1
Pull-up resistor
Typical 10 k to 1 m a
R2
Optional slew-rate control
Typical 0 to 100 k a
C1
Optional slew-rate control
Typical 1000 pF
The Si1040X is ideally suited for high side load switching in
portable applications. The integrated n-channel level-shift
device saves space by reducing external components. The
slew rate is set externally so that rise-times can be tailored
to different load types.
Note
a. Minimum R1 value should be at least 10 x R2 to ensure Q1
turn-on
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
Input voltage
VIN
8
VON/OFF
8
ON/OFF voltage
Continuous a, b
Load current
Pulsed b, c
Continuous intrinsic diode conduction a
Operating junction and storage temperature range
ESD rating, MIL-STD-883D human body model (100 pF, 1500 )
V
± 0.43
IL
A
±1
IS
Maximum power dissipation a
UNIT
-0.15
PD
0.174
W
TJ, Tstg
-55 to +150
°C
ESD
2
kV
THERMAL RESISTANCE RATINGS
PARAMETER
SYMBOL
TYPICAL
MAXIMUM
Maximum junction-to-ambient (continuous current) a
RthJA
600
720
Maximum junction-to-foot (Q2)
RthJC
450
540
UNIT
°C/W
Note
a. Surface mounted on 1" x 1" FR4 board
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
Reverse leakage current
IFL
VIN = 8 V, VON/OFF = 0 V
-
Diode forward voltage
VSD
IS = -0.15 A
-
TYP.
MAX.
UNIT
-
1
μA
0.85
1.2
V
V
OFF Characteristics
ON Characteristics
Input voltage range
1.8
-
8
-
0.500
0.625
VON/OFF = 1.5 V, VIN = 2.5 V, ID = 0.36 A
-
0.710
0.890
VON/OFF = 1.5 V, VIN = 1.8 V, ID = 0.3 A
-
1
1.25
VIN-OUT 0.2 V, VIN = 5 V, VON/OFF = 1.5 V
1
-
-
VIN-OUT 0.3 V, VIN = 3 V, VON/OFF = 1.5 V
0.8
-
-
VIN
VON/OFF = 1.5 V, VIN = 4.5 V, ID = 0.43 A
On-resistance (p-channel) at 1 A
On-state (p-channel) drain current
RDS(on)
ID(on)
A
Notes
a. Surface mounted on FR4 board
b. VIN = 8 V, VON/OFF = 8 V, TA = 25 °C
c. Pulse test; pulse width 300 μs, duty cycle 2 %
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
S10-2544-Rev. D, 08-Nov-10
Document Number: 71809
2
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Si1040X
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
1.0
1.4
VON/OFF = 1.5 V to 8 V
VON/OFF = 1.5 V to 8 V
1.2
0.8
V DROP (V)
V DROP (V)
1.0
0.6
TJ = 125 °C
0.4
TJ = 25 °C
0.8
TJ = 125 °C
0.6
TJ = 25 °C
0.4
0.2
0.2
0.0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
0.0
0.0
2.0
0.2
0.4
0.6
0.8
I L - (A)
1.2
1.4
1.6
1.8
I L - (A)
VDROP vs. IL at VIN = 2.5 V
VDROP vs. IL at VIN = 4.5 V
0.8
1.6
1.4
VON/OFF = 1.5 V to 8 V
0.7
VON/OFF = 1.5 V to 8 V
0.6
V DROP (V)
1.2
VDROP (V)
1.0
1.0
TJ = 125 °C
0.8
TJ = 25 °C
0.6
0.5
TJ = 125 °C
0.4
0.3
TJ = 25 °C
0.4
0.2
0.2
0.1
0.0
0.0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0
1.6
2
3
4
VIN (V)
VDROP vs. IL at VIN = 1.8 V
VDROP vs. IL at VIN = 0.5 V
5
1.6
0.20
IL = 0.3 A
VON/OFF = 1.8 V to 8 V
IL = 0.3 A
VON/OFF = 1.5 V to 8 V
1.4
R SS(on) - On-Resistance (Ω)
0.15
VDROP Variance (V)
1
I L - (A)
0.10
VIN = 1.8 V
0.05
VIN = 4.5 V
0.00
- 0.05
- 0.10
1.2
1.0
TJ = 125 °C
0.8
0.6
TJ = 25 °C
0.4
0.2
- 0.15
- 50
0.0
- 25
0
25
50
75
100
125
150
0
1
2
3
4
TJ - Junction Temperature (°C)
VIN (V)
VDROP Variance vs. Junction Temperature
On-Resistance vs. Input Voltage
S10-2544-Rev. D, 08-Nov-10
5
Document Number: 71809
3
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Si1040X
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
1.6
20
IL = 0.3 A
VON/OFF = 1.5 V to 8 V
tf
16
1.2
IL = 0.36 A
VON/OFF = 3 V
Ci = 10 µF
Co = 1 µF
VIN = 4.5 V
1.0
Time (µs)
(Normalized)
R DS(on) - On-Resistance
1.4
VIN = 1.8 V
0.8
0.6
12
8
td(off)
0.4
tr
4
0.2
td(on)
0.0
- 50
0
- 25
0
25
50
75
100
125
150
0
2
4
6
8
TJ - Junction Temperature (°C)
R2 (kΩ)
Normalized On-Resistance
vs. Junction Temperature
Switching Variation
R2 at VIN = 4.5 V, R1 = 20 k
10
20
20
tf
tf
16
16
12
Time (µs)
Time (µs)
tr
IL = 0.36 A
VON/OFF = 3 V
Ci = 10 µF
Co = 1 µF
tr
8
8
td(off)
td(off)
4
4
IL = 0.36 A
VON/OFF = 3 V
Ci = 10 µF
Co = 1 µF
12
td(on)
td(on)
0
0
0
2
4
6
8
0
10
2
4
R2 (kΩ)
8
10
R2 (kΩ)
Switching Variation
R2 at VIN = 2.5 V, R1 = 20 k
Switching Variation
R2 at VIN = 1.8 V, R1 = 20 k
80
80
IL = 0.36 A
VON/OFF = 3 V
Ci = 10 µF
Co = 1 µF
td(off)
tf
60
Time (µF)
60
Time (µs)
6
IL = 0.36 A
VON/OFF = 3 V
Ci = 10 µF
Co = 1 µF
40
20
tf
td(off)
40
tr
20
td(on)
tr
td(on)
0
0
20
40
60
80
R2 (kΩ)
Switching Variation
R2 at VIN = 4.5 V, R1 = 300 k
S10-2544-Rev. D, 08-Nov-10
0
100
0
20
40
60
80
100
R2 (kΩ)
Switching Variation
R2 at VIN = 2.5 V, R1 = 300 k
Document Number: 71809
4
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Si1040X
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
80
tf
Time (µs)
60
td(off)
IL = 0.36 A
VON/OFF = 3 V
Ci = 10 µF
Co = 1 µF
40
tr
td(on)
20
0
0
20
40
60
80
100
R2 (kΩ)
Switching Variation
R2 at VIN = 1.8 V, R1 = 300 k
2
Normalized Effective Transient
Thermal Impedance
1
Duty Cycle = 0.5
0.2
Notes:
0.1
PDM
0.1
0.05
t1
t2
1. Duty Cycle, D =
t1
t2
2. Per Unit Base = RthJA = 720 °C/W
0.02
3. TJM - TA = PDMZthJA(t)
Single Pulse
0.01
10 -4
10 -3
4. Surface Mounted
10 -2
10 -1
1
10
100
600
Square Wave Pulse Dureation (s)
Normalized Thermal Transient Impedance, Junction-to-Ambient
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?71809.
S10-2544-Rev. D, 08-Nov-10
Document Number: 71809
5
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
www.vishay.com
Vishay Siliconix
SC-89 6-Leads (SOT-563F)
E1/2
2
3
aaa
D
e1
4
C
2x
4
A
B
D
6
5
4
SECTION B-B
C
E/2
2
E
E1
3
6
2x
DETAIL “A”
aaa
C
1
5
2
2x
3
bbb
C
e
B
6x b
4
ddd
M
C
A–B D
L1
A1
L
A
A1
SEE DETAIL “A”
Notes
1. Dimensions in millimeters.
2. Dimension D does not include mold flash, protrusions or gate
burrs. Mold flush, protrusions or gate burrs shall not exceed
0.15 mm per dimension E1 does not include interlead flash
or protrusion, interlead flash or protrusion shall not exceed
0.15 mm per side.
3. Dimensions D and E1 are determined at the outmost extremes
of the plastic body exclusive of mold flash, the bar burrs, gate
burrs and interlead flash, but including any mismatch between
the top and the bottom of the plastic body.
4. Datums A, B and D to be determined 0.10 mm from the lead tip.
5. Terminal numbers are shown for reference only.
6. These dimensions apply to the flat section of the lead between
0.08 mm and 0.15 mm from the lead tip.
Revision: 11-Aug-14
DIM.
MILLIMETERS
MIN.
NOM.
A
0.56
0.58
MAX.
0.60
A1
0
0.02
0.10
b
0.15
0.22
0.30
0.18
c
0.10
0.14
D
1.50
1.60
1.70
E
1.50
1.60
1.70
1.25
E1
1.15
1.20
e
0.45
0.50
0.55
e1
0.95
1.00
1.05
L
0.25
0.35
0.50
L1
0.10
0.20
0.30
C14-0439-Rev. C, 11-Aug-14
DWG: 5880
Document Number: 71612
1
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Application Note 826
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR SC-89: 6-Lead
0.051
0.012
0.020
(0.300)
(0.500)
0.019
(0.478)
0.031
(0.798)
0.069
(1.753)
(1.300)
0.051
(0.201)
Recommended Minimum Pads
Dimensions in Inches/(mm)
Return to Index
Return to Index
APPLICATION NOTE
Document Number: 72605
Revision: 21-Jan-08
www.vishay.com
21
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
1
Document Number: 91000